Grace Company The Continuum Frame, Continuum Frame Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Grace Company The Continuum Frame Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Copyright January 1, 2016
Jim M. Bagley, GraceWood, Inc
(Reproduction Prohibited)
Version 2.4
2 Foot Extension Assembly Instructions
Continuum Frame
Table of Contents ...................................................................................................................... i
Parts List
Parts List..................................................................................................................................ii
Setup & Assembly
Step 1: Disassembly ................................................................................................................. 1
Step 2: 2 Foot Table Installation ................................................................................................ 4
Step 3: Center Leg and Table Installation ................................................................................... 5
Step 4: Middle Leg Brace Installation ......................................................................................... 6
Step 5: Track Assembly ............................................................................................................ 7
Step 6: Track Assembly Installation ........................................................................................... 9
Step7: Rail Assembly ...............................................................................................................10
Step 8: Rail Installation ...........................................................................................................11
Step 9: Rail Cap Installation ......................................................................................................11
2 Foot Table
(1)
Middle Leg
(1)
2 Foot Rail
(3)
Rail Coupler
(3)
Center
Leg Brace
(2)
Track Support
Connector
(2)
M6 x 6mm
Set Screw
(8)
M8x 16mm
SBHCS
(20)
3mm Allen
Wrench
(1)
4mm Allen
Wrench
(1)
5mm Allen
Wrench
(1)
12 Foot
Plastic Track
(4)
Leader
Cloth Set
(1)
|Parts List 2 Foot Extension
ii
Rail Cap
M5 x 20mm
SBHCS
1-1 Remove all Rail Caps and set aside.
1-2 Remove all Rails and set aside.
Take-Up Rail
Step 1 - Disassembly
Tools Needed:
3mm Allen Wrench
4mm Allen Wrench
5mm Allen Wrench
Backing Rail
Quilt Top Rail
1
Setup and Assembly
1-3 Remove Track and set aside.
Note: Repeat for the rear track.
1-4 Remove (8) Center Leg screws and set aside.
Note: Remove (4) screws from the front and the
rear so table sections can be separated.
Remove M6 x 10mm
Connector Bolts
Remove M6 x 10mm
Connector Bolts
M8 x 16mm
SBHCS
2
Setup and Assembly
1-6 Separate the Table Sections.
Left Leg
Middle Leg Right Leg
1-7 Remove one side of each rail assembly.
3
Setup and Assembly
M8 x 16mm
SBHCS
M8 x 16mm
SBHCS
2 Foot
Table
Step 2 - 2 Foot Table Installation
Parts Needed:
2 Foot Table
Remove M6 x 10mm
Connector Bolts
2-1 Remove Track Supports from 2 Foot Extension
Table.
2-2 Position the 2 Foot Table.
2-3 Secure using the (8) screws from step 1-4.
Note: Leave all bolts loose until step 4.
Tools Needed:
4mm Allen Wrench
5mm Allen Wrench
M8 x 16mm SBHCS
(8) from step 1-4
4
Setup and Assembly
3-1 Position the Table and Middle Leg.
Note: Adjust the height of the Middle Leg to match your existing setup.
Step 3 - Middle Leg and Table Installation
Parts Needed:
Middle Leg (1)
Tools Needed:
4mm Allen Wrench
5mm Allen Wrench
M8 x 16mm SBHCS (8)
Middle Leg
5
Setup and Assembly
Step 4 - Middle Leg Brace Assembly
Parts Needed:
Middle Leg Brace (2)
M8 x 16mm
SBHCS
M8 x 16mm
SBHCS
M8 x 16mm
SBHCS
M8 x 16mm
SBHCS
M8 x 16mm
SBHCS
3-2 Secure with (8) M8 x 16mm SBHCS.
M8 x 16mm SBHCS (12)
4-1 Position Middle Leg Braces and secure with
(12) M8 x 16mm SBHCS.
Note: Tighten all bolts at this time.
6
Setup and Assembly
M6 x 6mm
Set Screw
M6 x 6mm
Set Screw
2 Foot Track
Support
Track Support
Connector
Loosen
M6 x 6mm
Set Screw
Plastic Track
Tools Needed:
4mm Allen Wrench
Track Support
Coupler (2)
M6 x 6mm Set Screw (8)
12 Foot Plastic Track (4)
2 Foot Track Support
Extrusions (2)
Parts Needed:
Step 5 - Track Assembly
5-1 Remove Plastic Track from your current
conguration.
5-2 Remove one side of the Track Support from
your current conguration.
5-3 Assemble Track Support Making sure there is
no gap between the Track Support Extrusions.
7
Setup and Assembly
Long Plastic Track
5-4 Install new 12 Foot Plastic Track.
Note: If you are adding the 2 Foot Extension to an 8 Foot Frame, you will need to cut the track with a
saw. Do not bend the track to break it.
8
Setup and Assembly
M6 x 10mm
Connector Bolt
M6 x 10mm
Connector Bolt
12 ft Track
Assembly
Tools Needed:
4mm Allen Wrench
6-1 Install front Track Assembly using (10) M6 x 10mm Connector Bolts.
Note: Repeat for rear Track Assembly. Align the Tracks as shown in the Continuum Frame Assembly
Instructions.
Parts Needed:
Step 6 - Track Assembly Installation
M6 x 10mm
Connector Bolt (20)
(16) from step 1-3
9
Setup and Assembly
2 Foot
Rail
Rail
Coupler
Tools Needed:
4mm Allen Wrench
7-1 Assembly Rails as shown.
Note: If your system includes the 4th rail and/or idler rail accessories repeat step 7-1 for those rails.
Idler rail 2 foot extension and coupler included with the idler rail.
Parts Needed:
Step 7 - Rail Assembly
2 Foot Rail (3) Rail Coupler (3)
10
Setup and Assembly
Take-Up Rail
Idler Rail
8-1 Install extended rail assemblies into position.
Note: Assembly shown with 4th rail and idler rail accessories.
9-1 Install rail caps from step 1-1 on right and left
sides.
Batting
Rail
Backing
Rail
Quilt
Top Rail
Backing Rail
Quilt Top
Rail
Rail Cap
M5 x
20mm
SBHCS
Step 8 - Rail Installation
Tools Needed:
3mm Allen Wrench
Step 9- Rail Cap Installation
11
Setup and Assembly
The Grace Company
2225 South 3200 West
Salt Lake City, UT 84119
Phone: 1-800-264-0644
www.graceframe.com
/