Grace Company Continuum Frame Operating instructions

Brand: Grace Company

Model: Continuum Frame

Type: Operating instructions

This manual is also suitable for

The Continuum Frame

Grace Company The Continuum Frame

The Continuum Frame is a highly versatile and customizable quilting frame that can be adapted to various quilting projects, including large quilts. With its sturdy construction, the frame provides a stable and supportive surface for quilting, ensuring precise and consistent results.

The frame's modular design allows for easy assembly and disassembly, making it convenient for storage and transportation. The adjustable height and width settings cater to different user preferences and project requirements. Additionally, the frame's ability to extend in length makes it ideal for accommodating quilts of various sizes.

Grace Company The Continuum Frame

Jim M. Bagley, GraceWood, Inc

(Reproduction Prohibited)

Version 2.4

2 Foot Extension Assembly Instructions

Continuum Frame

Table of Contents ...................................................................................................................... i

Parts List

Parts List..................................................................................................................................ii

Setup & Assembly

Step 1: Disassembly ................................................................................................................. 1

Step 2: 2 Foot Table Installation ................................................................................................ 4

Step 3: Center Leg and Table Installation ................................................................................... 5

Step 4: Middle Leg Brace Installation ......................................................................................... 6

Step 5: Track Assembly ............................................................................................................ 7

Step 6: Track Assembly Installation ........................................................................................... 9

Step7: Rail Assembly ...............................................................................................................10

Step 8: Rail Installation ...........................................................................................................11

Step 9: Rail Cap Installation ......................................................................................................11

2 Foot Table

(1)

Middle Leg

(1)

2 Foot Rail

(3)

Rail Coupler

(3)

Center

Leg Brace

(2)

Track Support

Connector

(2)

M6 x 6mm

Set Screw

(8)

M8x 16mm

SBHCS

(20)

3mm Allen

Wrench

(1)

4mm Allen

Wrench

(1)

5mm Allen

Wrench

(1)

12 Foot

Plastic Track

(4)

Leader

Cloth Set

(1)

|Parts List 2 Foot Extension

Rail Cap

M5 x 20mm

SBHCS

1-1 Remove all Rail Caps and set aside.

1-2 Remove all Rails and set aside.

Take-Up Rail

Step 1 - Disassembly

Tools Needed:

3mm Allen Wrench

4mm Allen Wrench

5mm Allen Wrench

Backing Rail

Quilt Top Rail

Setup and Assembly

1-3 Remove Track and set aside.

Note: Repeat for the rear track.

1-4 Remove (8) Center Leg screws and set aside.

Note: Remove (4) screws from the front and the

rear so table sections can be separated.

Remove M6 x 10mm

Connector Bolts

Remove M6 x 10mm

Connector Bolts

M8 x 16mm

SBHCS

Setup and Assembly

1-6 Separate the Table Sections.

Left Leg

Middle Leg Right Leg

1-7 Remove one side of each rail assembly.

Setup and Assembly

M8 x 16mm

SBHCS

M8 x 16mm

SBHCS

2 Foot

Table

Step 2 - 2 Foot Table Installation

Parts Needed:

2 Foot Table

Remove M6 x 10mm

Connector Bolts

2-1 Remove Track Supports from 2 Foot Extension

Table.

2-2 Position the 2 Foot Table.

2-3 Secure using the (8) screws from step 1-4.

Note: Leave all bolts loose until step 4.

Tools Needed:

4mm Allen Wrench

5mm Allen Wrench

M8 x 16mm SBHCS

(8) from step 1-4

Setup and Assembly

3-1 Position the Table and Middle Leg.

Note: Adjust the height of the Middle Leg to match your existing setup.

Step 3 - Middle Leg and Table Installation

Parts Needed:

Middle Leg (1)

Tools Needed:

4mm Allen Wrench

5mm Allen Wrench

M8 x 16mm SBHCS (8)

Middle Leg

Setup and Assembly

Step 4 - Middle Leg Brace Assembly

Parts Needed:

Middle Leg Brace (2)

M8 x 16mm

SBHCS

M8 x 16mm

SBHCS

M8 x 16mm

SBHCS

M8 x 16mm

SBHCS

M8 x 16mm

SBHCS

3-2 Secure with (8) M8 x 16mm SBHCS.

M8 x 16mm SBHCS (12)

4-1 Position Middle Leg Braces and secure with

(12) M8 x 16mm SBHCS.

Note: Tighten all bolts at this time.

Setup and Assembly

M6 x 6mm

Set Screw

M6 x 6mm

Set Screw

2 Foot Track

Support

Track Support

Connector

Loosen

M6 x 6mm

Set Screw

Plastic Track

Tools Needed:

4mm Allen Wrench

Track Support

Coupler (2)

M6 x 6mm Set Screw (8)

12 Foot Plastic Track (4)

2 Foot Track Support

Extrusions (2)

Parts Needed:

Step 5 - Track Assembly

5-1 Remove Plastic Track from your current

conguration.

5-2 Remove one side of the Track Support from

your current conguration.

5-3 Assemble Track Support Making sure there is

no gap between the Track Support Extrusions.

Setup and Assembly

Long Plastic Track

5-4 Install new 12 Foot Plastic Track.

Note: If you are adding the 2 Foot Extension to an 8 Foot Frame, you will need to cut the track with a

saw. Do not bend the track to break it.

Setup and Assembly

M6 x 10mm

Connector Bolt

M6 x 10mm

Connector Bolt

12 ft Track

Assembly

Tools Needed:

4mm Allen Wrench

6-1 Install front Track Assembly using (10) M6 x 10mm Connector Bolts.

Note: Repeat for rear Track Assembly. Align the Tracks as shown in the Continuum Frame Assembly

Instructions.

Parts Needed:

Step 6 - Track Assembly Installation

M6 x 10mm

Connector Bolt (20)

(16) from step 1-3

Setup and Assembly

2 Foot

Rail

Coupler

Tools Needed:

4mm Allen Wrench

7-1 Assembly Rails as shown.

Note: If your system includes the 4th rail and/or idler rail accessories repeat step 7-1 for those rails.

Idler rail 2 foot extension and coupler included with the idler rail.

Parts Needed:

Step 7 - Rail Assembly

2 Foot Rail (3) Rail Coupler (3)

Setup and Assembly

Take-Up Rail

Idler Rail

8-1 Install extended rail assemblies into position.

Note: Assembly shown with 4th rail and idler rail accessories.

9-1 Install rail caps from step 1-1 on right and left

sides.

Batting

Rail

Backing

Rail

Quilt

Top Rail

Backing Rail

Quilt Top

Rail

Rail Cap

M5 x

20mm

SBHCS

Step 8 - Rail Installation

Tools Needed:

3mm Allen Wrench

Step 9- Rail Cap Installation

Setup and Assembly

The Grace Company

2225 South 3200 West

Salt Lake City, UT 84119

Phone: 1-800-264-0644

www.graceframe.com

Grace Company Continuum Frame Operating instructions

Brand: Grace Company

Model: Continuum Frame

Type: Operating instructions

This manual is also suitable for

The Continuum Frame

Grace Company The Continuum Frame

Download PDF

report

Grace Company Continuum Frame Operating instructions

This manual is also suitable for

Grace Company Continuum Frame Operating instructions

Related papers

Other documents