OPT7 Aura Pro Snowmobile Installation guide

Type
Installation guide

OPT7 Aura Pro Snowmobile is an advanced LED lighting system designed to enhance your snowmobiling experience with customizable colors, dynamic modes, and convenient features.

Key Features:

  • Full-Spectrum Color Customization: Choose from a vast range of colors to match your style or create custom lighting effects.
  • Dynamic Lighting Modes: Select from various built-in modes, including solid colors, color-changing patterns, and even a "door assist" mode that illuminates when you open the door.
  • Control via Bluetooth App: Wirelessly connect your smartphone to the control box using the OPT7 Connect app to easily adjust colors, modes, and brightness.

OPT7 Aura Pro Snowmobile is an advanced LED lighting system designed to enhance your snowmobiling experience with customizable colors, dynamic modes, and convenient features.

Key Features:

  • Full-Spectrum Color Customization: Choose from a vast range of colors to match your style or create custom lighting effects.
  • Dynamic Lighting Modes: Select from various built-in modes, including solid colors, color-changing patterns, and even a "door assist" mode that illuminates when you open the door.
  • Control via Bluetooth App: Wirelessly connect your smartphone to the control box using the OPT7 Connect app to easily adjust colors, modes, and brightness.
SNOWMOBILE
AURA PRO
TM
INSTALLATION GUIDE
COMPONENTS
DOUBLE WIDE LIGHT STRIPS
AURA BLUETOOTH CONTROL BOX
VARIOUS EXTENSION WIRES HARDWIRE POWER HARNESS
Y-SPLITTERS ZIPTIES
INSTALLATION
Inspect kit to ensure all contents was included.
STEP 1
Decide where to locate the light
strips and ensure wiring has
enough length for control box to
be installed in desired location.
STEP 2
EXAMPLES
EXTENSION WIRE
BATTERY
Y-SPLITTER
AUXILIARY
WIRE
#
You may Choose the desired color choice directly on the Aura app.This
feature will activate when the aux wiring is connected to the trigger wire for
positive(+) wire of brake light wire.
We provide multiple sets of extension wires for you to configure. You can
quickly extend them wherever you want to install.
You should ONLY set the color of your aux wire to “red” in color choice within the app. If
you plan on connecting the aux wire to your brake signal wire.
IMPORTANT NOTE!!
BEFORE YOU START
# AUX WIRING
FOR A BRAKE LIGHT
NOTE
1.
2.
Connecting to more than 10 AMP will override the kit and cause early
failure, ensure it is 10AMPs or less!!
Please ensure that the LED bars or strips/control box/wiring all are
mounted in areas where will not exceed 85 or 185.
WARNING
FUSE
Heat Shrink Tube
1
2
INSTALLATION
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
Scan the QR code on the back of
the control box to download the
app.
STEP 3
Secure Control box in desired
location with Velcro or zipties.
* The control box is NOT waterproof.
Tuck it away from the elements.
STEP 4
Secure the light strips using the
zip ties to tie all the wiring away
from the moving components.
STEP 5
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
or ELECTRICAL TAPE around the LED
connectors to ensure the longevity
of the lighting kit.
Open the OPT7 Connect App, pair
your smart device to the control
box, and pick your desired color!
STEP 6
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 CONNECT APP QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

OPT7 Aura Pro Snowmobile Installation guide

Type
Installation guide

OPT7 Aura Pro Snowmobile is an advanced LED lighting system designed to enhance your snowmobiling experience with customizable colors, dynamic modes, and convenient features.

Key Features:

  • Full-Spectrum Color Customization: Choose from a vast range of colors to match your style or create custom lighting effects.
  • Dynamic Lighting Modes: Select from various built-in modes, including solid colors, color-changing patterns, and even a "door assist" mode that illuminates when you open the door.
  • Control via Bluetooth App: Wirelessly connect your smartphone to the control box using the OPT7 Connect app to easily adjust colors, modes, and brightness.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI