IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Chute
Chute Control Rod
Wing Knobs
778-10555A© 2005 31AS6BN2711
Tighten wing knobs.
Pivot handle upward.
Remove flat washer and hairpin clip.
Insert chute control rod into bracket as
shown. Secure with washer and clip.
Place chute over base and close flange keepers (3).
Keepers will click into place when properly secured.
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Call 1-888-TO-HELP-U
Need Help?
(1-888-864-3578)
5
6
7
8
9
Gas Cap
Primer
Throttle
Key
Choke
10
Start
Button
Switch Outlet
Connect power cord to switch outlet on engine.
Fill tank with gas to within 1/2 inch of top of tank.
Check oil level and fill if necessary.
Push key into ignition slot. Be sure
ignition key snaps into place.
Rotate choke control to full choke position.
Push primer three times.
Move throttle control to fast (rabbit) position.
Press down on starter button for no more than
five seconds to start engine. Disconnect power
cord and move choke control to off after starting.
Do not turn key.
Oil
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Troy-Bilt 31AM62N2711 Fast Start Guide
-
Troy-Bilt 31AM63P3711 Fast Start Guide
-
-
-
-
-
-
-
Troy-Bilt 31AS62N2711 Fast Start Guide
-
Other documents
-
Bolens 11A-414E765 Quick start guide
-
Bolens 11A-418A765 Quick start guide
-
MTD 31AE6GKG731 Owner's manual
-
MTD 31AE6LFG700 Owner's manual
-
-
MTD 11A-074D765 Quick start guide
-
MTD 31AE6GLF723 Owner's manual
-
-
Yard Machines E640F Owner's manual
-