quadient PSD User guide

iX-9 Series

Meter Replacement

1. Remove the Existing Meter From your Mailing System

2. Unpack Replacement Meter

Remove replacement meter from the box and place

original meter back into the box to prepare the return.

3. Install New Meter

Swap meter

This procedure allows to install

your new meter in the machine

Once the mailing system has been powered on, follow

the on-screen prompts to complete the swap process.

Turn on the mailing system using the

power switch.

Turn o the mailing system using

the power switch.

4. Power Up the Mailing System

Congratulations! Your iX-9 Mailing System is Ready to Use

A0134466/A - 21/07/2020

Place the meter into the meter bay (a) and slide in until it ﬁts securely

into position (b). Close the mailing system cover.

       





Meter Serial

Number

Lift the cover of the mailing system base (a). Unlock the meter by pressing on the

raised area and pulling it towards you (b). Remove the meter from the base (c).

For additional information visit :

kb.quadient.us/ix9

        



