2. Computers & electronics
  3. Computer cables
  4. Signal cables
  5. quadient
  6. iX-5 Series

quadient iX-5 Series User guide

  • Hello! I've reviewed the user guide for the iX-5 Series Base mailing system replacement. This document provides detailed instructions on how to replace the base, including removing old components and installing the new base. The guide covers everything from disconnecting cables to inserting the ink cartridge. I am ready to answer your questions about the replacement process for the iX-5 Series Base mailing system.
  • How long does the base replacement take?
    What should I do with the old base?
    What is the first step in removing the components of mailing system?
back of the mailing system base
k
Continue
7 8
Remove the catch tray (c) from the mailing system base (a).Remove the mailing system base (a) from the automatic feeder (b).
iX-5 Series Base
Replacement Guide Average Time Required: 15 minutes
mailing
system base
automatic
feeder
catch tray
Mailing System
Components:
1. Remove the Components from your Original Mailing System
125
6
Remove the weighing platform (d) and shelf (j)
from the mailing system base.
3
When opening the cover, the ink cartridge (i)
moves to the replacement position. Press down
on the back of the ink cartridge to disengage
it. Lift out the ink cartridge.
Remove the LAN cable (f), weighing platform cable (e),
automatic
feeder cable
(k)
,
and power cable (g).
Open the latch, pull forward the meter (h)
and remove it.
Lift the cover of the mailing system
to reveal the meter (h) and ink
cartridge (i) bays.
4
Turn o the mailing system by pressing the
power switch.
automatic
feeder
cable
weighing platform
shelf
LAN cable power cable meter ink cartridge
weighing platform
cable
j
k
j
A0115495/B - 08/07/2021
2
Install the catch tray (c) on the mailing system base (a).
1
Install the automatic feeder (b) on the mailing system base (a).
5. Assemble the Elements
Place the shelf (j) and weighing platform (d) on the
mailing system.
3
Congratulations
Your mailing system is ready to use!
For more information or if you experience
any issues please visit :
kb.quadient.us/ix5
Plug in the LAN cable
(f)
, weighing platform cable
(e)
, automatic
feeder cable
(k)
and power cable
(g).
Once the mailing system is powered on, follow
the steps on screen to complete the replacement
process.
6. Connect your Cables 7. Switch On the Mailing System
Remove replacement unit from the box & place the original unit
back into the box ready for return. Insert the ink cartridge (i) into the mailing system base with the ‘TOP’
sticker facing upwards. Push the ink cartridge (i) towards the back of
the mailing system until you hear a ‘click’ - close the cover of the mailing
system.
Place the meter (h) into the meter bay and slide in until it fits securely
into position.
Lift the cover of the mailing system to
reveal the meter (h) and ink cartridge (i)
bays.
2. Unpack your Replacement 3. Insert the Meter 4. Install the Cartridge
Next
Swap base
This process allows you to
install your new base.
Turn on the mailing system by pressing the power
switch.
k
j
12
1 2
/