Barco SOperate Installation guide

Type
Installation guide

This manual is also suitable for

MEDIA
SIGNAGE
R9852170
INSTALLATION MANUAL
17022004 R5976675/01
Barco nv Media
Noordlaan 5, B-8520 Kuurne
Phone: +
32 56.36.89.70
Fax: +32 56.36.88.24
Visit us at
the web: www.barco.com
PrintedinBelgium
Changes
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not
limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make im-
provements and/or changes to the product(s) and/or the program(s) described in this publication at any time
without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made
to the information in this publication; these changes are incorporated in new editions of this publication.
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise
be recorded, transmitted or stored in a retrieval system without the prior written consent of BARCO.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights
of their respective holders. All brand and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or their manufactures.
Table of contents
TABLE OF CONTENTS
1. Overview ..............................................................................................3
1.1Beforestarting.....................................................................................................3
1.2Systemrequirements .............................................................................................3
1.3InstallationOverview..............................................................................................3
2. Installation of the Signage software............................................................5
2.1Functionofthedifferentcomponents...........................................................................5
2.2Installationofthetypicalcomponents...........................................................................6
2.3InstallationofDirectXandInternetExplorer...................................................................16
3. Removing Signage ...............................................................................17
3.1HowtoremoveSignage.........................................................................................17
4. Updating Signage.................................................................................19
4.1HowtoupdateSignage .........................................................................................19
Index....................................................................................................21
R5976675 SIGNAGE 17022004 1
Table of contents
2 R5976675 SIGNAGE 17022004
1. Overview
1. OVERVIEW
Overview
Before starting
System requirements
Installation Overview
1.1 Before starting
Overview
This guide is intended for system adm inistrators. It assumes you are fam iliar with the Win do w s operating
system at your site and with standard system administration tasks.
The CD-ROM in your package contains all the product data for the Signage, including a Windows-based
installation program. You can install the software from the CD-ROM.
1.2 System requirements
Hardware requirements
Specificat io n
Minimum
Video card
Preferred latest NVidea or ATI chipset (7500 Radeon exempted)
Video mem 32 MB shared video memory
Processor type Pentium III, single processor
Processor speed
1GHz
RAM
256 MB (512 MB recommended)
Hard drive
40 GB
Monitor
1024x768 (recommended 1280 x 768)
DirectX support DirectX 9.0
Operating system
Windows 2000 SP
3
Windows NT4.0
1.3 Installation Overview
Installation steps
1. Inst allation
info gathering.
2. Installation of Java.
3. Inst allation of
DIVX codex.
R5976675 SIGNAGE 17022004
3
1. Overview
4. Installation of Elecard MPEG-2 player.
5. Installation of Windows Mediaplayer.
6. Manual installation of Internet Explorer and DirectX.
4
R5976675 SIGNAGE 17022004
2. Installation of the Signage software
2. INSTALLATION OF THE SIGNAGE
SOFTWARE
Close all other programs before starting the installation procedure.
2.1 Function of the different components
Overview table
Component
Description
DirectX 8.1 DirectX installer provided by the install package. Manual
installation is necessary after the installation procedure is
finished.
DirectX is a set of multimedia programming interfaces from
Microsoft for Windows that provide low-level access to the
hardware for improv ed performa nce.
optional
Internet Explorer 6.0
SP1
Internet browser application. Installer provided by the install
package
optional
MediaPlayer 9.0
Playback of video and audio files
required
JDK JDK1.4.1_01 is necessary to run the application required
Flash
Installation o f the Flash 6 plug in.
required
MPEG4 Installs the MPEG4 codec for MPEG4 avi content.
required
MPEG2 Elecard MPEG2 player
required
DIVX
Installs the DIVX 5 codex for DIVX conten t.
optional
W32Time configuration
and installation
This is an option and not included in the typical set up.
This se ts up the Si5 as a time server.
optional
PowerManagement
configuration
Adjusts the registry for no powermanagement and no
screensaver.
optional
IOMessag in g
configuration
Sets the registry so that no warning messages will be displayed
at bootup when no keyboard or no mouse are attached to the
comput er.
required
Eventlogging
configuration
Adjusts the registry for the application, system and security
logs to overwrite as needed, so an error message cannot pop
up while the Si4 playout is in progress or when th
eSi5gets
rebooted.
required
R5976675 SIGNAGE 17022004 5
2. Installation of the Signage software
2.2 Installation of the typical components
Starting the set up
1. Double click on Setup.exe to run the program.
The Setup window opens with system information (System info). (image 2-1)
Set up has checked if the current user has administrator privileges or not. If not, the procedure will be
terminate.
It gives the operating system and the system memory.
2. Click Next to continue.
The license window opens (License agreement). (image 2-2)
Read this te xt carefully.
3. Do you agree with the license text?
If yes, Click Yes to accept the agreement and to continue to the next step.
The setup wizard checks first which packages are installed and which has to be installed (Checking for
Signage components on Si5). (image 2-3)
If no , click No to interrupt the installation procedure.
4. Click Next to continue.
The path selection window opens (Destination path for Signage package). (image 2-4)
5. Select a path and c lick Next.
The setup choice window will open (Choose the setup type for the Signage package). (image 2-5)
The following choices are possible:
- Typical : program will be installed with the most common options. Recommended.
- Custom : the customer has the choice which options must be installed. For advanced users and
system administrators.
6. Make your choice by selecting tumbnail button.
If you have chosen for Custom, a check list will pop up (Select optional Signage components). Make
your choices and click Next .
The database installation window opens (Database installation). (image 2-6)
6
R5976675 SIGNAGE 17022004
2. Installation of the Signage software
7. Select the desired database option.
Selection
Description
Database
software
Database software includes Database Creation and Database Structures
installation.
Database
creation
Database Creation includes Database Structures installation.
Database
Structure
Database Structures implies installation of the Database Structures without
Database Creation or Software installation.
None Database installation will be skipped.
When one of the database options is selected, follow the instructions to install the database. For more
explanation, see Oracle installation documentation.
Default location for the database software is d:\Oracle\.
Default database name is SIOP
In case the PC has already the database software on another location, the database creation option
should not be chosen.
In case the PC has a database with a
nother name, the database structure option should not be chosen.
8. Click Next to continue.
The check setup info will be display
ed (Check setup information).
This gives info about:
- The way of installation
- installation directory
- Components to be installed
When Signage was already installed, it informs that an update will be done.
9. Click Next to continue the installation.
When finished, a final window will be displayed.
Image 2-1
System information
R5976675 SIGNAGE 17022004 7
2. Installation of the Signage software
Image 2-2
License agreement
Image 2-3
Checking system for components on
Si5.
8 R5976675 SIGNAGE 17022004
2. Installation of the Signage software
Image 2-4
Destination path
Image 2-5
Setup type
R5976675 SIGNAGE 17022004 9
2. Installation of the Signage software
Image 2-6
Database installation window
Flash 6 ins
tallation
1. The installation wizard will popup the Flash registration window. (image 2-7)
2. Click OK to re
gister.
Flash will be installed.
Image 2-7
Flash registration window
Installation of DIVX
1. During t
he installation the setup program checks if DIVX Version 5.02 is installed on the PC. If not, the
installation procedure will be started. (image 2-8)
2. Click Next.
The welcome window will be displayed.
3. Click Next.
The License window will be displayed.
4. Click Yes to accept the license.
The destination window opens.
5. Browse to the desired location if the proposed location is not the desired one and click Next.
The Select components window opens. (image 2-9)
6. By default, both components are checked. Click on DivX Player 2.0 Alpha 5 to unselect.
Click on Next.
The ready to install window opens.
10
R5976675 SIGNAGE 17022004
2. Installation of the Signage software
7. Click Next.
The finish window will open.
8. Click Close to finish the DivX installation procedure.
Image 2-8
DIVX installation start up
Image 2-9
Select components window
Installation of Elecard MPEG-2 player (Moonlight Cordless)
1. During the installation the setup program checks if Elecard MPEG-2 player software is installed on the
PC. If not, the installation procedure will be started. (image 2-10)
2. Click o n Extract.
The install window opens
3. Click Next.
The License window opens.
4. Click Yes to accept this license.
The install location window opens.
R5976675 SIGNAGE 17022004
11
2. Installation of the Signage software
5. Browse to the desired directory and click Next.
The Ready to complete installation window opens.
6. Click Next.
The Program group window opens.
7. Click OK.
The following message will be displayed : ’Do you want associate the install application with supported
file types’ (image 2-11)
8. Click Cancel.
The insta llation will be comple te d. A Complete win dow will be d isplayed.
9. Leave e verything unchecked. Click Fin ish.
Image 2-10
MPEG-2 player software installation
Image 2-11
Associate message
Windows Mediaplayer
1. During the installation the setup program checks if the Windows Mediaplayer software is installed on
the PC.
If not, the installation procedure will be started.
A first message window will be displayed. Do not let the mediaplayer installer to reboot the PC. (im-
age 2-12)
2. Click OK.
The license w indow will opens. (image 2-13)
3. Click o n I accept.
A welcome window opens.
12
R5976675 SIGNAGE 17022004
2. Installation of the Signage software
4. Click o n Next.
The Privacy options windows opens. (image 2-14)
5. Unsele ct the first 3 options and click Next.
The Customize install options window will be displayed. (image 2-15)
6. Select all options and click Finish.
The mediaplayer starts up. (image 2-16)
7. Close the media player.
Image 2-12
Reboot m essage Mediaplayer
Image 2-13
License window Mediaplayer
R5976675 SIGNAGE 17022004 13
2. Installation of the Signage software
Image 2-14
Privacy options
Image 2-15
Customize install options
14 R5976675 SIGNAGE 17022004
2. Installation of the Signage software
Image 2-16
Mediaplayer running
JAVA JDK installation
1. Click Next on the installation set up window.
A silent installation will take place.
Finishing installation
1. Click Next to continue.
The installation wizard shows the finish window. (image 2-17)
Image 2-17
Installation finis hed
R5976675 SIGNAGE 17022004 15
2. Installation of the Signage software
2.3 Installation of DirectX and Internet Explorer
How to install
The Intern et Explorer and the DirectX installer can be found in the installers su bdirectory of the Signage
installation folder.
Go to that folder and e xecute the right installers to start u p the installation wizard and follow the instruc-
tions.
16
R5976675 SIGNAGE 17022004
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Barco SOperate Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI