Spectacular
Installation Manual
R5976521/04
04/0
3/2005
Barco nv Media
Noordlaan 5, B-8520 Kuurne
Phone: +
32 56.36.89.70
Fax: +32 56.36.83.86
E-mail: media@barco.com
Visit us at
the web: www.barco.com
Printed in Belgium
Changes
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not
limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make im-
provements and/or changes to the product(s) and/or the program(s) described in this publication at any time
without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made
to the information in this publication; these changes are incorporated in new editions of this publication.
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise
be recorded, transmitted or stored in a retrieval s ystem without the prior written consent of Barco.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights
of their respective holders. All brand and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or their manufactures.
Table of contents
TABLE OF CONTENTS
1. Overview ..............................................................................................3
1.1 Before starting................................................................................................... 3
1.2 System requirements........................................................................................... 3
1.3 Installation Overview ........................................................................................... 3
2. Installation of the Spe ctacular software.......................................................5
2.1 Function of the different components......................................................................... 5
2.2 Installation of the typical Spectacular components.......................................................... 6
2.3 Installation of the database ...................................................................................16
2.4 Installation of DirectX and Internet Explorer ................................................................17
3. Removing Spectacular ..........................................................................19
3.1 How to remove Spectacular ..................................................................................19
4. UpdatingSpectacular............................................................................21
4.1 Update possibilities ............................................................................................21
4.2 How to update by keeping the existing data ................................................................21
4.3 How to update starting from a clean database .............................................................21
Glossary................................................................................................23
Index ....................................................................................................25
Listof images.........................................................................................28
R5976521 SPECTACULAR 04/03/2005 1
Table of contents
2 R5976521 SPECTACULAR 04/03/2005
1. Overview
1. OVERVIEW
Overview
• Before starting
• System requirements
• Installation Overview
1.1 Before starting
Overview
This guide is intended for system administrators. It assumes you are familiar with the W indows operating
system at your site and with standard system administration tasks.
The C D-ROM in your package contains all the product data for the S pectacular, including a Windows-
based installation program. You can install the software from the CD-ROM.
1.2 System requirements
Hardware requirements
Specificat io n
Minimum
Video card
Preferred latest NVidea or ATI chipset (7500 Radeon exempted)
Video mem 32 MB shared video memory
Processor type Pentium III, single processor
Processor speed
1GHz
RAM
256 MB (512 MB recommended)
Hard drive
40 GB
Monitor
1024x768 (recommended 1280 x 768)
DirectX support DirectX 8.1
Operating system
• Windows 2000 SP
3
• Windows NT4.0
1.3 Installation Overview
Installation steps
1. Inst allation
info gathering.
2. Installation of Java.
3. Inst allation of
DIVX codex.
R5976521 SPECTACULAR 04/03/2005
3
1. Overview
4. Installation of Elecard MPEG-2 player.
5. Installation of Windows Mediaplayer.
6. Manual installation of Internet Explorer and DirectX.
4
R5976521 SPECTACULAR 04/03/2005
2. Installation of the Spectacular software
2. INSTALLATION OF THE SPECTACULAR
SOFTWARE
Close all other programs before starting the installation procedure.
2.1 Function of the different components
Overview table
Component
Description
DirectX 8.1 DirectX installer provided by the install package. Manual
installation is necessary after the installation procedure is
finished.
DirectX is a set of multimedia programming interfaces from
Microsoft for Windows that provide low-level access to the
hardware for improv ed performa nce.
optional
Internet E x plorer 6.0
SP1
Internet browser application. Installer provided by the install
package
optional
MediaPlayer 9.0
Playback of video and audio files
required
JDK JDK1.4.1_01 is necessary to run the application required
Flash
Installation o f the Flash 7 plug in.
required
MPEG4 Installs the MPEG4 codec for MPEG4 avi content.
required
MPEG2 Elecard MPEG2 player
required
DIVX
Installs the DIVX 5 codex for DIVX conten t.
optional
W32Time configuration
and installation
This is an option and not included in the typical set up.
This se ts up the Si5 as a time server.
optional
PowerManagement
configuration
Adjusts the registry for no powermanagement and no
screensaver.
optional
IOMessag in g
configuration
Sets the registry so that no warning messages will be displayed
at bootup when no keyboard or no mouse are attached to the
comput er.
required
Eventlogging
configuration
Adjusts the registry for the application, system and security
logs to overwrite as needed, so an error message cannot pop
up while the Si4 playout is in progress or when th
eSi5gets
rebooted.
required
R5976521 SPECTACULAR 04/03/2005 5
2. Installation of the Spectacular software
2.2 Installation of the typical Spectacular components
Starting the set up
1. Insert the Spectacular installation CD in the CD reader and browse to the CD root.
2. Double click on Setup.exe to run the program.
The Setup window opens with system information (System info). (image 2-1)
Set up has checked if the current user has administrator privileges or not. If not, the procedure will be
terminate.
It gives the operating system and the system memory.
3. Click Next to continue.
The license window opens (License agreement). (image 2-2)
Read this te xt carefully.
4. Do you agree with the license text?
If yes, Click Yes to accept the agreement and to continue to the next step.
The setup wizard checks first w hich packages are installed and which has to be installed (Checking for
Spectacular components on Si5). (image 2-3)
If no , click No to interrupt the installation procedure.
5. Click Next to continue.
The path selection window opens (Destination path for Spectacular package). (image 2-4)
6. Select a path and c lick Next.
The setup choice window will open (Choose the setup type for the Spectacular package). (image 2-5)
The following choices are possible:
- Typical : program will be installed with the most common options. Recommended.
- Custom : the customer has the choice which options must be installed. For advanced users and
system administrators.
7. Make your choice by selecting tumbnail button.
If you have chosen for Custom, a check list will pop up (Select optional Spectacular components). Make
your choices and click Next .
The check setup info will be displayed (Check setup information). (image 2-6)
This gives info about:
- The way of installation
- ins tallation directory
- Components to be installed
When Spectacular was already installed, it informs that an update will be done.
8. Click Next to continue the installation.
When finished, a final window will be displayed.
6
R5976521 SPECTACULAR 04/03/2005
2. Installation of the Spectacular software
Image 2-1
System information
Image 2-2
License agreement
R5976521 SPECTACULAR 04/03/2005 7
2. Installation of the Spectacular software
Image 2-3
Checking system for components on Si5
Image 2-4
Destination path
8 R5976521 SPECTACULAR 04/03/2005
2. Installation of the Spectacular software
Installation of DIVX
1. During the installation the setup program checks if DIVX Version 5.02 is installed on the PC. If not, the
installation procedure will be started. (image 2-8)
2. Click Next.
The welcome window will be displayed.
3. Click Next.
The License window will be displayed.
4. Click Yes to accept the license.
The destination window opens.
5. Browse to the desired location if the proposed location is not the desired one and click Next.
The Select components window opens. (image 2-9)
6. By default, both components are checked. Click on DivX Player 2.0 Alpha 5 to unselect.
Click on Next.
The ready to install window opens.
7. Click Next.
The finish window will open.
8. Click Close to finish the DivX installation procedure.
Image 2-8
DIVX installation start up
10 R5976521 SPECTACULAR 04/03/2005
2. Installation of the Spectacular software
Image 2-9
Select components window
Installation of Elecard MPEG-2 player (Moonlight Cordless)
1. During the installation the setup program checks if Elecard MPEG-2 player software is installed on the
PC. If not, the installation procedure will be started. (image 2-10)
2. Click o n Ext
ract.
The install window opens
3. Click Next.
The License window opens.
4. Click Yes to acc
ept this license.
The install location window opens.
5. Browse to the de
sired directory and click Next.
The Ready to complete installation window opens.
6. Click Next.
The Program group window opens.
7. Click OK.
The following message will be displayed : ’Do you want associate the install application with supported
file types’ (image 2-11)
8. Click Cancel.
The insta llation will be comple te d. A Complete win d ow will be displayed.
9. Leave e verything unchecked. Click Fin ish.
R5976521 SPECTACULAR 04/03/2005
11
2. Installation of the Spectacular software
Image 2-10
MPEG-2 player software installation
Image 2-11
Associate message
Windows Mediaplayer
1. During the installation the setup program checks if the Windows Mediaplayer software is installed on
the PC. If not, the installation procedure will be started.
A first message window will be displayed. Do not let the mediaplayer installer to reboot the PC. (im-
age 2-12)
2. Click OK.
The license w indow will opens. (image 2-13)
3. Click o n I accept.
A welcome window opens.
4. Click o n Next.
The Privacy options windows opens. (image 2-14)
5. Unsele ct the first 3 options and click Next.
The Customize install options window will be displayed. (image 2-15)
6. Select all options and click Finish.
The mediaplayer starts up. (image 2-16)
7. Close the mediaplayer.
12
R5976521 SPECTACULAR 04/03/2005
2. Installation of the Spectacular software
Image 2-12
Reboot message Mediaplayer
Image 2-13
License window Mediaplayer
R5976521 SPECTACULAR 04/03/2005 13
2. Installation of the Spectacular software
Image 2-14
Privacy options
Image 2-15
Customize install options
14 R5976521 SPECTACULAR 04/03/2005
2. Installation of the Spectacular software
Image 2-16
Mediaplayer running
JAVA JDK installation
1. Click Next on the installation set up window.
A silent installation will take place.
Finishing installation
1. Click Next to continue.
The installation wizard shows the finish window. (image 2-17)
Image 2 -17
Installation finished
R5976521 SPECTACULAR 04/03/2005 15
2. Installation of the Spectacular software
2.3 Installation of the database
Database installation
1. Place the Oracle 8i installation CD-ROM in the CD reader.
2. Browse to the Spectacular install directory and select installers → Oracle → 8i → install.cmd
3. Double click on install.cmd.
4. Indicate the CD-ROM drive (e.g. E:).
5. Enter the O ra cle installation folder, e.g. d:\oracle .
Note: No w hitespaces allo wed in the installation path.
6. Click Next to continue with the installation.
The installation can take about 15 minutes.
When the script ends with OR ACLE 8i INSTALLED, the dat abase is installed on the comp uter.
Services setup
1. Select Start → Settings → Control Panel.
2. Select Administrative To ols → Services.
The Services window opens. (image 2-18)
3. Double click one after each other on the next services and set the startup setting as indicated.
The Properties window opens. Click on the combo box next to Startup type.
Service n aam Startup setting
OracleOperateHome81Agent
Manual
OracleOperateHome81DataGatherer
Manual
OracleOperateHome81TNSListener
Automatic
Image 2 -18
Oracle services
Database creation
1. Browse to the Spectacular ins ta l l directory and selec t installers → Oracle → 8i → createdb.cmd
2. Enter the O ra cle installation folder, e.g. d:\oracle .
3. Press N ext to continue.
The database will be created. It can take about 20 minutes.
The default database name will be SIOP3.
4. When the database is created, continue with the next procedure.
16
R5976521 SPECTACULAR 04/03/2005
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
Barco SOperate Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Barco TransForm SCN Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Freecom 30034 Datasheet
-
For Dummies 978-0-470-77018-4 Datasheet
-
MSI GP65 Leopard (Intel® 10th Gen)(GeForce® GTX) Owner's manual
-
Codex XL-SERIES User manual
-
HP H4G49AA Datasheet
-
Aerosoft Reunion FSDG Operating instructions
-
Waves PS22 Stereo Maker Owner's manual
-
Holiday Brilliant TY-T7 User manual
-
Sony VPL-CX6 User manual
-
Crestron electronic TPS Series User manual
