MEDIA &EVENTS
ROTATOR MODULE
R9842362
INSTALLATION MANUAL
For Solaris
02022004 R5976702/00
Barco nv Media
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.89.70
Fax: +32 56.36.88.24
E-mail: [email protected]
Visit us at the web: www.barco.com
Barco nv Events
Noord
laan 5, B-8520 Kuurne
Phone: +32 56.36.89.70
Fax: +32 56.36.88.24
E-mail:
Visit us at the web: www.barco.com
Printed in Belgium
1. Installation procedure
1. INSTALLATION PROCEDURE
Before starting the installation procedure, switch off the Solaris LC40 and unplug from the wall outlet.
1.1 Building in the rotator module
How to build in
1. Turn out the 8 screws on the input panel side and the 2 screws, one left and one right of the input pan
el. (image 1-1)
2. Slide the removable inputs a little bit forward.
3. Open the module cover plate by rotating it a little bit backwards and hooking it out.
4. Connect the rotator module into its sockets. (image 1-2)
5. Secure with the 3 screws. (image 1-3)
6. Hook in the module cover and close it.
7. Push the removable inputs back into the connectors.
8. Fix the cover with both side screws and the 8 front screws.
Image 1-1
Module cover removal
R5976702 ROTATOR MODULE 02022004 1
1. Installation procedure
Rotator
Connectors
Image 1-2
Plug in the rotator
3 screws
Image 1-3
Fix rotator
2 R5976702 ROTATOR MODULE 02022004
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Barco Audio pr-amp input modules excl speakers Installation guide
-
-
-
-
-
-
-
-
-