2. ESAB
  3. Use of m3 Adaptor

ESAB Use of m3 Adaptor Troubleshooting instruction

  • Hello! I am an AI chatbot trained to assist you with the ESAB Use of m3 Adaptor Troubleshooting instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.esabna.com
DATE: January 15, 2007 BULLETIN NO: 055800xxxx
TITLE/ PRODUCT NAME: Use of m3 Adaptor 0558006476
RATING:
_
_ DIRECTIVE _ _ ALERT
(Action is Required) (Potential Problem)
_
_ INFORMATION _ _ PRODUCT IMPROVEMENT
(Action is Optional) (Enhanced Product)
_
X_ General Distribution _ _ Business Confidential
(Unrestricted) (Restricted Distribution)
PRODUCT SERIES/ MODEL: See table shown below
SERIAL NO: N/A
SUMMARY: Adaptor is only used when replacing previous design power supply with a newer
design. Adaptor is not supplied with power supply unit and must be ordered from ESAB Welding and
Cutting Products if required.
ALERT
(Potential Problem)
PRODUCT IMPROVEMENT
(Enhanced Product)
Business Condential
(Restricted Distribution)
DIRECTIVE
(Action is Required)
INFORMATION
(Action is Optional)
General Distribution
(Unrestricted)
RATING:
DATE: January 18, 2007 BULLETIN NO: 0558007086
TITLE / PRODUCT NAME: Use of m3 Adaptor 0558006476
PRODUCT SERIES / MODEL: See table shown below
Power Supply ESAB P/Ns for Previous Design Units ESAB P/Ns for New Design Units
EPP-400
0558005614 = 400V, 50 / 60 Hz CE 0558006470 = 400V, 50 / 60 Hz CE
0558005615 = 460V, 60 Hz 0558006471 = 460V, 60 Hz
0558005616 = 575V, 60 Hz 0558006472 = 575V, 60 Hz
EPP-600
0558005701 = 400V, 50 / 60 Hz CE 0558007473 = 400V, 50 / 60 Hz CE
0558005702 = 460V, 60 Hz 0558006474 = 460V, 60 Hz
0558005703 = 575V, 60 Hz 0558006475 = 575V, 60 Hz
ATTENTION
IF YOU HAVE PURCHASED A NEW POWER SUPPLY TO REPLACE A PREVIOUS
DESIGN UNIT, PLEASE READ THE FOLLOWING INFORMATION CAREFULLY.
____
____
__X__
____
____
____
24 Pin Connector
To Newer Design
Power Supply
19 Pin Connector
For Power Supply
Cable
10 Pin Connector
For Cut / Mark Mode
Interface Cable
Adaptor
0558006476
www.esabna.com
DATE: January 15, 2007 BULLETIN NO: 055800xxxx
TITLE/ PRODUCT NAME: Use of m3 Adaptor 0558006476
RATING:
_
_ DIRECTIVE _ _ ALERT
(Action is Required) (Potential Problem)
_
_ INFORMATION _ _ PRODUCT IMPROVEMENT
(Action is Optional) (Enhanced Product)
_
X_ General Distribution _ _ Business Confidential
(Unrestricted) (Restricted Distribution)
PRODUCT SERIES/ MODEL: See table shown below
SERIAL NO: N/A
SUMMARY: Adaptor is only used when replacing previous design power supply with a newer
design. Adaptor is not supplied with power supply unit and must be ordered from ESAB Welding and
Cutting Products if required.
SERIAL NO: Includes all serial numbers
SUMMARY:
Adaptor is only used when replacing a previous design power supply with a newer design. Adaptor is not
supplied with new power supply unit and must be ordered from ESAB Welding and Cutting Products if required.
/