ESAB ESP-150 Solenoid Resistor Failure Troubleshooting instruction

www.esabna.com

DATE: August 16, 2004 BULLETIN NO: P_04_014

TITLE/ PRODUCT NAME: ESP-150 Solenoid Resistor Failure

RATING:

_ DIRECTIVE _X_ ALERT

(Action is Required) (Potential Problem)

X_ INFORMATION _ _ PRODUCT IMPROVEMENT

(Action is Optional) (Enhanced Product)

X_ General Distribution _ _ Business Confidential

(Unrestricted) (Restricted Distribution)

PRODUCT SERIES/ MODEL:

All ESP-150 consoles

SERIAL NO:

All Serial Numbers

SUMMARY:

Resistors are mounted on the outside solenoid terminals and can short to the left side panel

which blows the fuse.

OPERATIONAL IMPACT:

The blown fuse will disable the power source.

ACTION:

Reposition resistors to the inside solenoid terminals. See picture.

For Additional Information Contact:

ESAB Welding & Cutting Products

Product & Service Information Group

843-664-4416 Phone

843-664-5539 FAX