ESAB Competitors Wire Feeder Adaptors Troubleshooting instruction

www.esabna .com

DATE: February 17, 2004 BULLETIN NO: M_04_004

TITLE/ PRODUCT NAME: Competitors Wire Feeder Adaptors

RATING:

_ _ DIRECTIVE _ _ ALERT

(Action is Required) (Potential Problem)

_ _ INFORMATION _

X_ PRODUCT IMPROVEMENT

(Action is Optional) (Enhanced Product)

X_ General Distribution _ _ Business Confidential

(Unrestricted) (Restricted Distribution)

PRODUCT SERIES/ MODEL:

Miller Wire Feeder Adaptor – 0558001415

Lincoln Wire Feeder Adaptor - 0558001416

SERIAL NO:

All Serial Numbers

ESAB 353cv, 453cv and 653cvcc Power Sources Only

SUMMARY:

These wire feeder adaptors are designed to provide a means of connecting a limited number or

competitors wire feeders to the ESAB SCR type power sources to provide primarily wire feeder

main power and contactor control only. Remote voltage control is not supported but may be

usable depending on the model feeder being used.

We recommend that work be completed by a qualified electrical technician. Use the schematics

on the reverse side to determine if the competitive feeder in question can be used with the

adaptor.

Note

The Miller adaptor is applicable to 24 and 42 vac wire feeders only and uses a 14 pin amphenol

receptacle. The Lincoln adaptor can handle 24/42 and 110 vac wire feeders by direct

connection to the appropriate terminals on the connector strip.

CONTACT:

ESAB Welding & Cutting Products

Product & Service Information Group

843-664-4416 Phone

843-664-5539 FAX

Miller Adaptor 0558001415

Lincoln Adaptor 0558001416