29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
Installation Manual
Specifications
Voltage: 240V IP Rating: 54
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
BL-400 Date: 05/2023
Variants Item No. Lamp Base
Clear Frost
10670 10671 BL-400 E27 (Lamp not included)
Thank you for purchasing your new Bollard Head Light, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty.
1 2
Off
On
3
4 5 6
7 8 9