DOMUS LIGHTING HOIST-PDT Installation guide

Brand
DOMUS LIGHTING
Model
HOIST-PDT
Type
Installation guide
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com.au
Installation Manual
Specifications
Voltage: 240V Power: 25W LED Max IP Rating: 20 Lamp Base: E27
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
HOIST-PDT Date: February 17, 2022 2:55 PM
Variants Item No. Lamp Base
Blk/Clear Sch/Smoke Abr/Amber
22731 22732 22733 HOIST-PDT E27
Thank you for purchasing your new HOIST Pendant Light, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty.
1 2 3
4
  • Page 1 1

DOMUS LIGHTING HOIST-PDT Installation guide

Brand
DOMUS LIGHTING
Model
HOIST-PDT
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents