2. DOMUS LIGHTING
  3. SOLAR-400 Round Tricolour 35W 400MM Slimline LED Dimmable IP54 Oyster Light
SOLAR-400 Round Tricolour 35W 400MM Slimline LED Dimmable IP54 Oyster Light

DOMUS LIGHTING SOLAR-400 Round Tricolour 35W 400MM Slimline LED Dimmable IP54 Oyster Light User manual

  • Hello! I've reviewed the Installation Manual for the DOMUS SOLAR-RND-400 series Ceiling Lights, specifically the SOLAR-RND-400-W-TRIO and SOLAR-RND-400-B-TRIO models. This manual guides professional installers through the process of setting up these dimmable, color-adjustable lights. I'm ready to answer your questions about the installation process and the light's features.
  • What is the voltage requirement for this light?
    Is this light dimmable?
    What is the lifespan of this light?
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com
Installation Manual
Specifications
Voltage: AC 240V Lumen (±5%): Warm White 3000K - 3150lm
Neutral White 4000K - 3200lm
White 5700K - 3250lm
Dimmable: Ye s*
Power: 35W Beam Angle: 120°Operating Temp: -20°C~45°C
IP Rating: 54 CCT: 3000K - 4000K - 5700K (Switchable) Power Factor: ≥0.9
CRI: ≥80 Lifespan: 40,000hrs
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
SOLAR-RND-400-TRIO September 20, 2022 9:31 AM
Order Code Product Code Description
20942 SOLAR-RND-400-W-TRIO 35W Ceiling Light Oyster, TRIO. Satin White Finish
20943 SOLAR-RND-400-B-TRIO 35W Ceiling Light Oyster, TRIO. Black Finish
Thank you for purchasing your new LED SOLAR-RND-400-TRIO, Please take the time to read and understand the instruction sheet
below. Failure to do so may void warranty.
L=Brown
N=Blue
=Yellow-Green
OFF
ON
DIM
1.Take out ceiling light and accessory pack
from box 2. Knock-in the plasc anchor into ceiling 3. Remove screw, take out bracket
Open
4. Fix bracket with screw into the ceiling 5. Open juncon box, wire“L”“N” to
terminal block and mount ceiling light
into the right place
6. Switch on
/