29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
Installation Manual
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
Specifications
Voltage: 240V Power: Max. 20W
IP Rating: IP65 Lamp Base: E27 x 1
PILLA CUBE Date: July 1, 2022 3:33 PM
Variants Item No. Lamp Base
Blk Wht
10993 10994 PILLA-CUBE E27
Thank you for purchasing your new PILLA-CUBE Pillar Mount, Please take the time to read and understand the instruction sheet
below. Failure to do so may void warranty.
OFF
ON
3. 4.
5. 6.
L
N
L (Brown)
N (Blue)