DOMUS SHADOW-1-GRDN Installation guide

  • Hello! I've reviewed the installation manual for the DOMUS SHADOW-1-GRDN and SHADOW-2-WB garden spike lights. This manual outlines the specifications for various models, including their 12V DC power requirements, IP65 rating, and swivel capabilities. It also emphasizes the need for professional installation. I'm ready to assist with any questions you may have about the device or its installation, including technical specifications.
  • What type of lamp is used?
    What is the IP rating of the light?
    What voltage is required for the light?
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com
Installation Manual
Specifications
Voltage: 12V DC Power: 20W
Lamp: MR16 IP Rating: 65
LED Driver required (Wire in parallel).
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
90º Tilt
270º
Swivel
Ø60mm
110mm
64mm
174mm
650mm
August 30, 2022 11:58 am
SHADOW-1-GRDN
Description: Single light, Garden spike light
Variant Item No. Finish CCT
49071
SHADOW-2-WB
Black finish
N/A
49122 3000K
49124 5000K
49073 TRIO
49072
Stainless Steel
N/A
49126 3000K
49128 5000K
49074 TRIO
Thank you for purchasing your new SHADOW-1-GRDN, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty.
/