2. DOMUS
  3. SHADOW-1-WB
SHADOW-1-WB

DOMUS SHADOW-1-WB Installation guide

  • Hello! I have reviewed the installation manual for the DOMUS SHADOW-1-WB wall light. This document provides specifications like the 240V voltage, GU10 lamp, 35W max power, and IP rating of 65, also it describes different finishes and CCT options. I'm ready to answer your questions about the product.
  • What type of lamp does the SHADOW-1-WB use?
    What is the maximum power of the lamp?
    What is the IP rating of the SHADOW-1-WB?
    What voltage is required for the SHADOW-1-WB?
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com
Installation Manual
Specifications
Voltage: 240V Power: 35W Max
Lamp: GU10 IP Rating: 65
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
Blue/Black
Brown/Red
LL
E
NN
Stainless Steel
& Copper models
Aluminium models
68mm
110mm
125mm
22mm
85mm
60mm
August 30, 2022 11:59 am
SHADOW-1-WB
Description: Single light, down wall light
Variant Item No. Finish CCT
49011
SHADOW-1-WB
Black finish
N/A
49138 3000K
49140 5000K
49016 TRIO
49012
White finish
N/A
49156 3000K
49158 5000K
49017 TRIO
49013
Titanium Silver finish
N/A
49150 3000K
49152 5000K
49018 TRIO
49014
Copper finish
N/A
49142 3000K
49144 5000K
49019 TRIO
49015
316 Stainless Steel finish
N/A
49146 3000K
49148 5000K
49020 TRIO
Thank you for purchasing your new SHADOW-1-WB, Please take the time to read and understand the instruction sheet below. Failure to
do so may void warranty.
/