BL-400

DOMUS BL-400 Operating instructions

  • Hello! I'm a chat assistant that has reviewed the Installation Manual for the DOMUS BL-400 Bollard Head Light. This document includes installation steps, important specifications such as the E27 lamp base and IP54 rating, and key safety instructions. I am here to answer any questions you might have about the product or its installation process.
  • What type of lamp base does the Bollard Head Light use?
    What is the voltage requirement for the Bollard Head Light?
    What is the IP rating of the Bollard Head Light?
    Can I install the Bollard Head Light by myself?
29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia
Phone: 02 9554 9600 | Fax: 02 9554 9433
[email protected] | www.domuslighting.com.au
Installation Manual
Specifications
Voltage: 240V IP Rating: 54
Note: -The lamp must be installed by professional electrician
-Ensure the power supply is switched off before fitting this product
-Do not touch the lamp when in use
-Keep away from hot steam and corrosive gas
BL-400 Date: 05/2023
Variants Item No. Lamp Base
Clear Frost
10670 10671 BL-400 E27 (Lamp not included)
Thank you for purchasing your new Bollard Head Light, Please take the time to read and understand the instruction sheet below.
Failure to do so may void warranty.
1 2
Off
On
3
4 5 6
7 8 9
/