Ampire LDS-NTG35-CP Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Ampire LDS-NTG35-CP Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
LCD_IN
LCD_OUT
WIFI ANTENNA
Connect to CARPLAY-USB cable
Multimedia USB
RGB input cable
Update adapter
Power cable
Microphone cable
LCD OUT cable
LCD IN cable
OFF
ON
Reset Dip Switch LED
PIN 6
PIN 7
PIN 8
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
NG / NG
OFF/ON
(After changing the dip code,press "reset"or power-on again)
DIP S/W
Status
PIN 1
PIN 3
PIN 2
PIN 4
PIN 5
OFF/ON
Reversing gridline/Enable 360 panoramic
Rear view camera CVBS input / RGB input
NG / NG
Connect to the Phone's original cable
Connect to original headunit
Connect to the original cable of
the original headunit
Optional cable
Connect to RGB output device
RED---12V output for rear view camera
ORANGE--Reverse control cable (connect to reversing light) for AVM
/without reversing gridline
YELLOW---RCA Front/Rear video input(Connect to front
/rear view camera/360 AVM/DVR
BLACK---Stereo audio output
Stereo audio cable
Microphone
Connect to the
original headunit
cable(The original
cable is blue).
Plug into the original
headunit's LVDS port
1) Lo
ng press
and hold "
" butt
on to swit
ch MENU
,short pres
s" " button again,
exit MENU
.
NG / NG
NG / NG
After market rear camera / Original rear camera
DIP SWITCH SETTING
2) Short press "TEL"b
utton to o
pen "Siri".
3)
Knob to contr
ol up
/dow
n/right/left/ok.
If there is no AUX interface,
pls Activate by professional PC
Description
8inch (Adjustable Angle) / 8 inch (Fixed Angle
REMARK:Please keep in the AUX interface when switch the CarPlay interface
BENZ Old S class (NTG3.5) WIRING DIAGRAM
---- LDS-NTG35-CP
/