Ampire LDS-VWGF-CP Installation guide

Brand: Ampire

Model: LDS-VWGF-CP

Type: Installation guide

LCD_IN

LCD_OUT

Volkswagen MQB(Golf/Tiguan/Phideon/B8)WIRING DIAGRAM

WIFI ANTENNA

Connect to CARPLAY-USB cable

Multimedia USB RGB input cable

Update adapter

Connect to the Phone's original cable

Connect to original

headunit ISO connector

Optional cable

Connect to RGB output device

RED---12V output for rear view camera

ORANGE--Reverse control cable (connect to reversing light) for AVM

/ without reversing gridline

YELLOW---RCA Front/Rear video input(Connect to front

/rear view camera/360 AVM/DVR

BLACK---Stereo audio output

Stereo audio cable

Microphone

Microphone cable

LCD OUT cable

LCD IN cable

Plug into the original headunit's LVDS port

REMARK:Please keep in the AUX interface

when switch the CarPlay interface

OFF

Reset

Dip Switch

LED

DIP SWITCH SETTING

(After changing the dip code,press "reset"or power-on again)

DIP S/W STATUS

PIN 1 OFF/ON

PIN 2 OFF/ON

PIN 3 OFF/ON

PIN 4 OFF/ON

PIN 6 OFF/ON

PIN 7 OFF/ON

PIN 8 OFF/ON

NG / NG

Close front view camera/Open front view camera

Reversing gridline/Enable 360 panoramic

Rear view camera CVBS input / RGB input

Aftermarket rear view CAM/Original rear view CAM

1) Long press and hold "MENU" button to switch MENU,

long press"MENU" button again,exit the switch MENU.

2)Short press "SOUND" button to open "Siri".

3)Other functions use touch screen to control it.

Connect to the orig

inal headunit'

cable (The orig

inal cable is gray).

Connect to the original cable

of the original headunit

---LDS-VWGF-CP

FUNCTION

7 inch / 5.8inch

PIN 5 OFF/ON

NG/Touch point coordinate correction,and then turn"OFF"

NG/NG

Ampire LDS-VWGF-CP Installation guide

Ampire LDS-VWGF-CP Installation guide

Ampire LDS-VWGF-CP Installation guide

Related papers

Other documents