LCD_IN
CAN BOX
Connect to CARPLAY-USB cable
Multimedia USB
Optional cable (Connect to RGB output device)
Connect to the Phone's original cable
Connect to original headunit
WIFI ANTENNA
Power cable
Microphone cable
LCD OUT cable
Touch panel cable
REMARK:Please keep in the AUX interface when switch the CarPlay interface
RED---12V output for rear view camera
ORANGE--Reverse control cable (connect to reversing light) for AVM
/without reversing gridline
YELLOW---RCA Front/Rear video input(Connect to front
/rear view camera/360 AVM/DVR
Microphone
Connect to the original cable
of the original headunit
BLACK---Stereo audio output Stereo audio cable
If no original AUX IN,need the
AMI switch wire (Optional cable)
Connect to the LVDS ADAPATER'S video in
Connect to CTRL
Connect to the original
headunit's LVDS cable
Connect to the original
monitor's LVDS port
Connect to the LVDS
ADAPTER'S LCD OUT
LVDS ADAPTER
Reset Dip Switch LED
BMW CCC--DIP SWITCH SETTING
(After changing the dip code,press "reset"or power-on again)
Status
Description
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
8inch screen/NG
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
Reversing gridline/Enable 360 panoramic
NG / NG
Automatic Knob/Manual Knob
Rear view camera CVBS input / RGB input
After market rear camera / Original rear camera
NG / NG
NG / NG
1) Long press and hold "MENU"button to switch MENU,long press"MENU" button again,exit MENU.
2)Short press " " button to return,and Knob to control up/down/right/left/ok.
3)SWC" "and " " can control next and forward.
4)Short press Knob button down to open "Siri".
AUX Connector:
Pls plug it into the original AUX IN port
BMW (CCC) WIRING DIAGRAM--LDS-CCC-CP
/
