2. Computers & electronics
  3. Networking
  4. Network switches
  5. Asante
  6. FriendlyNet FH205P
FriendlyNet FH205P

Asante FriendlyNet FH205P User manual

  • Hello! I am an AI chatbot trained to assist you with the Asante FriendlyNet FH205P User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the Asante FriendlyNet FH205P?
    What are the key features of the FH205P?
    What are the contents of the package?
    How do I install the FH205P?
    How do I set up the Uplink connection?
1 PRODUCT INTRODUCTION
Asanté’s FriendlyNet FH205P 5-port Dual-speed Ethernet Hub offers a cost-effective solution to
today’s growing need for greater network speed. With five10/100Mbps plug-and-play ports, you can
begin installing 100Mbps devices in your existing 10Mpbs network and move to a 100Mbps network
in the future.
Key features include:
• Compliant with IEEE802.3 & 802.3u Class I and II Repeater specifications
• 10Base-T/100Base-TX N-WAY automatic speed detection
• Compact size
• One Uplink switch to support uplink function
PACKAGE CONTENTS
The package should include the following items:
• One FriendlyNet FH205P 5-port Dual-speed Ethernet Hub
• One power adapter
• One power cord
• One mail-in registration card
• One User's Guide
If any item is missing, please contact your dealer immediately.
FriendlyNet FH205P
5-port Dual-speed Fast Ethernet Hub
User’s Guide
FH205PQSG 3/17/99 5:45 PM Page 1
HARDWARE DESCRIPTION
Front Panel
The LED indicators help you to monitor the working status of the hub and overall network situation.
LED Indicators
Rear Panel:
The rear panel includes one power socket, which accepts 5 VDC power input, switch for
NODE/UPLINK (next to port #1) and 5 RJ-45 UTP/STP ports.
Power
LED
100Mbps Speed-detection LED
Collision LED
Link / Activity LED
FH205P
LINK/ACT
100Mbps
12345
10M 100M
COL
Power
for 10 and 100Mbps
5X 4X 3X 2X 1
Node Uplink
DC 5V
10/100Mbps
UTP/STP ports
Power adapter
socket
green Lit = link established;
Blink = receiving data
Link /Activity (LINK/ACT)
green Lit = 100Mbps link activated100Mbps (100Mbps)
yellow Lit = Data collision occursCollision (COL)
green Lit = Power on
Power (PWR)
Color DescriptionLED Indicator
FH205PQSG 3/17/99 5:45 PM Page 2
A: Basic Installation
1. Place the hub on a smooth, horizontal surface.
2. Establish network connection by plugging one end of the Category 5 UTP/STP cable
RJ-45 connector into the hub port, the other end to the Ethernet/Fast Ethernet
adapter installed in the workstation computer.
3. Connect each device by repeating step 2 .
4. Ensure that each device is connected properly. Turn on the power by attaching the
power cable to the hub and plug in the power outlet.
Attention: Be sure to use Category 5 UTP/STP cable in connecting 100Mbps network
devices. The cable length shall not exceed 100 meters.
B: Uplink Connection
1. Set the Uplink switch to “Uplink” position.
2. Plug one end of the Category 5 UTP/STP cable RJ-45 connector into the Uplink port
of the first hub.
3. Plug the other end into an ordinary port on the second hub.
Attention:
I. Crossover cable is not necessary in establishing uplink connection through uplink
port.
II. The uplink cable length shall not exceed 5 meters.
FH205PQSG 3/17/99 5:45 PM Page 3
The FriendlyNet FH205Pcan be deployed where 10Mbps and 100Mbps network devices coexist
and need to be integrated. The diagram below illustrates one sample application:
4 PRODUCT SPECIFICATIONS
Standards supported IEEE802.3, IEEE802.3u, Class II Repeater
10/100Base-TX UTP/STP Port 5 N-WAYports
Uplink port Port #1
Cabling UTP/STPCategory 3, 4, 5 (100 ohm impedance)
LED indicators Power — green
Collision — yellow
100Mbps — green
Link/Activity — green/blink
Input voltage 100–240 Vac, 47/63Hz
Output voltage 5 VDC
Operating temperature 0–50°C (32–122°F)
Operating humidity 5–95%
Certification FCC Class Aand CE
Dimensions 170mm (W) x 155mm (D) x 30mm (H)
6.7” (W) x6.1” (D) x 1.2” (H)
©Asanté Technologies, Inc. • Contents are subject to revision without prior notice. All rights reserved. • 06-00510-00 Rev. B
March 1999
5X 4X 3X 2X 1
Node Uplink
DC 5V
10Mbps
workstation 100Mbps
workstation 10Mbps
workstation 100Mbps
workstation 100Mbps
workstation
Connection cable may be up to 100 meters long
FH205PQSG 3/17/99 5:45 PM Page 4
/