Page is loading ...
Quick Start Guide
IR Bullet Network Camera
201305. 770. A1
Quick Start Guide
Package Contents
The Camera
A
Camera Stand
Hardware Package
B
C
D
E
Quick Start
Guide
Product CD
Screws
Quick Start Guide
Desiccant Bag
1
Power Adapter
F
Quick Start Guide
Physical Description & Connection
Connections
LAN
DC Power
1. Dene the type of network device.
2. If the network device supports PoE
(P ower ov er Ethe rnet) function,
simply connect the camera to it via
Ethernet cable.
3. If not, the connections to the network
device (via Ethernet cable) and DC
are required.
2
Quick Start Guide
Assigning IP address
1. Launch Discovery Tool (Discovery.exe). The tool will start searching and then displaying the cameras on the
Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static
IP address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if
the camera is password protected. (Default ID/Password: admin/1234)
3
Quick Start Guide
4. Click on the “Browse” button to get access to the camera web page immediately.
4
Quick Start Guide
Accessing the camera
1. Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool. The
web page with video will then be shown as below. (Default ID/Password: admin/1234)
2. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL
is rtsp://Camera IP/stream1. The example given below is that live video is displayed with QuickTime player.
5
/