2.2 Assigning IP address
1. Launch Discovery Tool (IPCamDiscovery.exe). The tool will start searching and then displaying the cameras on the
Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static IP
address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if the camera is
password protected. (Default ID/Password: admin/1234)
4. Clickonthe“Browse”buttontogetaccesstothecamerawebpageimmediately.
2.3 Accessing the camera
1. Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool. The web page
with video will then be shown as below. (Default ID/Password: admin/1234)
2. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL is rtsp://
Camera IP/stream1. The example given below is that live video is displayed with QuickTime player.
2
English
30
admin