Messoa NCB752 Quick start guide
- Category
- Security cameras
- Type
- Quick start guide
Network Camera
Quick Start
Guide
201407 752.750 A1
NCB752
NCB750
1 Product Overview
1.1 Physical Characteristics & Connection
Connections
Microphone
Light Sensor
LED Indicator
55.0
66.0
65.5
DC-12V
AC-24V
RJ-45
Terminal Block
Focus
Assist
Button
Micro SD
DC IRIS
MIC in
Audio
Out
Video
Out
Reset
mm
mm
mm
1. Dene the type of network device.
2. If the network device supports PoE (Power over Ethernet) function, simply connect the camera to it via Ethernet cable.
3. If not, the connections to the network device (via Ethernet cable) and AC or DC adapter are required.
1
English
2 Installation
2.1
Package Content- Ceiling Mount Model
Camera
A
Camera Stand
Fixed Lens
(For NCB750)
B
C
D
Power Adapter
(For NCB750)
Screws Pack
E
screws
F
Quick Start
Guide
2.2
Assigning IP address
1. Launch Discovery Tool (IPCamDiscovery.exe). The tool will start searching and then displaying the cameras on the
Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static IP
address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if the camera is
password protected. (Default ID/Password: admin/1234)
4. Click on the “Browse” button to get access to the camera web page immediately.
2
English
30
admin
2.4
Cable Management
A considerate design of groove located on the sides. Users can arrange the DC-Iris cable neatly.
3
2.3
Accessing the camera
1. Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool. The web
page with video will then be shown as below. (Default ID/Password: admin/1234)
2. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL is rtsp://
Camera IP/stream1. The example given below is that live video is displayed with QuickTime player.
English
2.5
Focus Assist Button
Focus Assist Button allows users to adjust the camera focus with precision by a simple click.
Step 1: "Press" Focus Assist Button
●
Rotate the lens focus clockwise or anticlockwise to either end (N or ∞).
●
Press and hold the button for 3 seconds until LED indicator ashes from Green light to Amber light.
Step 2: Adjust Focus
●
Keep the camera pointing to the same scene during the tuning process .
●
Start tuning the focus in order to turn the LED Green.
●
If LED displays Red light, it indicates the opposite turning direction.
Flashing Green → Steady Amber
Focus
Assist
Button
focus controller
Step 3: Get the Best Focus Value
●
When camera gets correct focus, the LED will become Green flashing.
●
Remain the camera's pointing direction until the LED becomes steady Green.
4
English
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Messoa NCB752 Quick start guide
- Category
- Security cameras
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
Messoa NCB750 Quick start guide
-
-
-
-
Messoa NDR720 Quick start guide
-
-
-
-
Messoa NDF821 Quick start guide
-