Page is loading ...
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
Installation Instructions,
Wood Post Anchors
30180 T4-600 24" 4x4
30160 T4-850 34" 4x4
30200 C4-850 34" 4x4
30380 T46-850 36" 4x6
30400 T6-850 36" 6x6
30700 MB-24 24" 4x4
30410 T6-700 32" 6x6
Accessory-Deck Plate
50880 OD-T4 12"x12"
1
Installation Instructions, Wood Post Anchors
Typical Installation
with 50880 Deck Plate
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
[732]
28.83
30400
149
5.88
[917]
36
30700
100
3.95
30380
[914]
36
99
3.90
150
5.91
30410
[813]
32.00
142
5.59
30180
102
4.04
[609]
24
30200
109
4.29
[863]
34
Overview
3
Installation Instructions, Wood Post Anchors
30160
[863]
34.00
102
4.04
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
44.45
1.75
1
plate can be painted to match black post
anchors with automotive spray can bedliner
Accessory: 50880
4
Installation Instructions, Wood Post Anchors
309
12
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
Post securing options
#10 x 1-1/4" panhead screw mounting holes •
(screws not included)
Polyurethane adhesive; 3-4 squeezes on •
chauk gun applicator inside "injection hole"
Both methods above•
polyurethane adhesive injection hole
Typical
5
Installation Instructions, Wood Post Anchors
notes:
post anchor may be driven into any desired depth.•
recommend using polyurethane adhesive on •
applications where securing holes are below
surface level to prevent post rot.
30160 shown
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
50880
(sold
separately)
sledge hammer
(not included)
scrap piece
check angle
every 1"
repeat
until 1/2 way
sledge hammer installation
6
Installation Instructions, Wood Post Anchors
post level #50740
(sold separately)
not installed
while driving
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
jack hammer
(rental)
post level #50740
(sold separately)
not installed
while driving
JDK installation
7
Installation Instructions, Wood Post Anchors
check angle
every 1"
repeat
until 1/2 way
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
check angle
every 1"
repeat
until 1/2 way
upper section
slides up & down
to drive post anchor
MDK installation
8
Installation Instructions, Wood Post Anchors
post level #50740
(sold separately)
not installed
while driving
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
8x flathead screw
(not supplied)
polyurethane adhesive
Method 1: halfway depth with screws & adhesive
9
Installation Instructions, Wood Post Anchors
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
8x flathead screw
(not supplied)
Method 2: ground level depth with screws
10
Installation Instructions, Wood Post Anchors
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
(4x) lag bolt
(not supplied)
Method 3: halfway depth with lag bolts
11
Installation Instructions, Wood Post Anchors
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
Method 4: full depth with adhesive
12
Installation Instructions, Wood Post Anchors
polyurethane adhesive
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
Idea's
13
Installation Instructions, Wood Post Anchors
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/29/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/29/2016 . Please visit OZCOBP.com to get current information.
with 50880
14
Installation Instructions, Wood Post Anchors
/
