Oz-Post 40600 Installation guide

Oz-Post
Brand
Oz-Post
Model
40600
Type
Installation guide

This manual is also suitable for

V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
Installation Instructions, Post Driver Kit
20500 (MDK-13) Manual Driver
20480 (JDK-10) Jackhammer Driver
Accessories
20440 (OH-02) Jackhammer Driver Bit
50740 Post Level
40640 (HSP-HB)
40600 (HSP-13)
40540 (HSP-T6)
40580 (HSP-125)
40520 (HSP-T46)
1
Installation Instructions, Post Drivers
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
HSP-T4 Red Spacer
(for use with jackhammer)
20480 JDK-10
OH-01 Driver Bit
Overview
3
Installation Instructions, Post Drivers
Manual Driver
20500 MDK-13
HSP-T4 Red Spacer
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
HSP-T6
40540
OH-02
20440
HSP-125
40580
HSP-T46
40520
Post Level
50740
HSP-13
40600
HSP-HB
40640
Accessories
4
Installation Instructions, Post Drivers
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
jack hammer
(rental)
JDK-10
20480
check angle
every 1"
repeat
until 1/2 way
post level #50740
(sold separately)
not installed
while driving
JDK-10
5
Installation Instructions, Post Drivers
V2.00 - Installation Instructions, Specifications and Project Plans are effective 3/28/2016 . This information is updated periodically
and should not be relied upon after 2 years from 3/28/2016 . Please visit OZCOBP.com to get current information.
post level #50740
(sold separately)
not installed
while driving
check angle
every 1"
repeat
until 1/2 way
upper section
slides up & down
to drive post anchor
MDK-13
20500
MDK-13
6
Installation Instructions, Post Drivers
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Oz-Post 40600 Installation guide

Oz-Post
Brand
Oz-Post
Model
40600
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents