Toro KIT-MIRROR [RP] User manual

 NOTE: Read these installation instructions thoroughly before beginning the installation process. Retain

these Installation Instructions for future reference.

Arctic Cat

Installation Instructions - Accessory Kit

Form No. 0453-675

Rearview Mirror Kit

(p/n 1436-414)

Kit includes:

p/n QTY DESCRIPTION

1541-019 1 Mirror Assembly

1541-020 1 Clamp

1541-021 1 Pivot Arm

1541-022 2 Machine Screw and Nut

0453-675 1 Instructions

1. Install Clamp around the top front canopy tube

in the desired position keeping the flat portion

towards the rear of the vehicle.

2. Install Pivot Arm into the mirror assembly

securely. Do not overtighten.

3. Secure the pivot arm to the clamp using two

Machine Screws and two Nuts. Tighten to 25

in.-lb. See Fig. 1.

Fig. 1

UTV-089

4. Remove clear cellophane protective sheet from

the mirror.

 NOTE: Always use warm, soapy water and a cot-

ton cloth to wash the mirror.

Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 0914