Toro WINDSHIELD WIPER, MANUAL User manual

 NOTE: Read these Installation Instructions thoroughly before beginning the installation process. Retain

these Installation Instructions for future reference.

Arctic Cat

Installation Instructions - Accessory Kit

Form No. 0453-809

Manual Windshield Wiper Kit

(p/n 1436-582)

Kit includes:

p/n QTY DESCRIPTION

1541-014 1 Blade (1)

1541-015 1 Arm (2)

1541-016 1 Handle and Cap (3)

1541-017 1 Stem (4)

1541-018 1 Sleeve and Nut Assembly (5)

0453-809 1 Instructions

1. On glass windshields, use holes provided or if cus-

tom location, drill the steel in the desired location

with a 7/16 drill bit.

 NOTE: Do not drill through glass or damage will

occur.

2. On poly carbonate windshields, determine the

desired location; then drill using a 7/16 drill bit.

 NOTE: Poly carbonate windshields have a

scratch resistant coating. Caution should be taken

when wiping mud or abrasive material off wind-

shield as it will affect coating over time.

3. Secure Windshield Wiper using the illustration

shown below. See Fig. 1.

Fig. 1

ROV-133A

Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 0914