Toro KIT-WINDSHIELD, LOW PROWLER (RP)-G2 User manual

 NOTE: Read these installation instructions thoroughly before beginning the installation process. Retain

these Installation Instructions for future reference.

Arctic Cat

Prowler

Installation Instructions - Accessory Kit

Form No. 0453-692

Low Windshield Kit

(p/n 1436-876 & 1436-514)

Kit includes:

Ref. No. p/n QTY DESCRIPTION

1 N/A 1 Low Windshield

2 2441-224 4 Clamp

3 * 4 Machine Screw

4 * 4 Flat Washer

5 * 4 Nut

0453-692 1 Instructions

* Included in Hardware Kit (p/n 1436-573)

1. Place two Clamps (2) on the forward-most section

of the ROPS (two per side) making sure the flat

side of the clamp is facing toward the front of the

vehicle. See Fig. 1.

Fig. 1

UTV-096A

2. With the clamps properly positioned, secure

Low Windshield (1) to the clamps with four

Machine Screws (3), four Flat Washers (4), and

Nuts (5). Tighten until snug only.

CAUTION

Do not over-tighten the nuts. Damage to the wind-

shield may occur.

Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1013