2. JasonL
  3. FSB0400BK

JasonL FSB0400BK Operating instructions

  • Hello! I've reviewed the user manual for the Switch In Desk Power Box. This document provides a step-by-step guide on how to disassemble and reassemble the device with the help of screws. I'm ready to answer your questions about the instructions provided.
  • How many screws do I need to remove to take off the side cover?
    What do I do after removing the screws?
    How do I reassemble the device?
1 of 2
www.jasonl.com.au
CMS Switch In Desk
Power Box
Need help! Call us on 1300 527 665
2 of 2
www.jasonl.com.au
CMS Switch In Desk
Power Box
Need help! Call us on 1300 527 665
You will see two screws on the sides as illustrated in the image. Unscrew them to
remove the side cover. Once you have done this on both sides, you will be able
to slide the components out.
How to disassemble and assemble:
Diagram of the product completely disassembled.
To reassemble, simply slide the parts back inside, place
both side covers to secure all the pieces, and finally
screw them in place.
/