JasonL QDW1807.B.WTUS0716BPT Operating instructions

Type
Operating instructions
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
Page 1 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
Table top x1
Table top Return x1
Legs Quadro A x2
Legs Quadro A Return x1
Beam x1
Beam Return x1
Plastic bracket x6
Joiner plates x2
A
B
C
D
E
F
G
H
Allen key x2O
M8x20MM CSK x3
M8x20MM Socket head x4
M6x20MM Socket head x6
M6x30MM Socket head x8
Join plates Screws
M6x30mm Mushroom head screw x6
I
J
K
L
M
N
COMPONENTS
SCREWS
Page 2 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
F
G
H
I J K L M
A
B
C
DN
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 9
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Mushroom Head Screw (N) - for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
N
J
K
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 03
Using Allen Key provided, attach 2 plastic brackets (G) per legs (C & D)
(as per picture above) using M6x20MM (K) Socket head screw
Using Allen Key provided, attach M8x20MM Socket head (J)-
screw socket half way into leg for three legs (C & D)
STEP 04
Page 4 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 05
Adjust extendable beam (E) to desired
length using markers and secure beam
at that length using screws provided
Page 5 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 06
TOP VIEW
Attach beam (E) to legs (C) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (E) with Socket (I)
STEP 07
Page 6 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
I
I
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 08
Now attach the return beam (F) to return leg (D) using nut insert in legs. See point attached.
Then, connect the hook of the return beam to the beam of the main structure.
Page 7 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
I
F
D
M
H
B
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 09
Page 8 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Attach Connector Plates (H) to Return Top (B) by tightening Screws (M)
ASSEMBLY INSTRUCTIONS
Quadro Wood A
L-Shaped Desk
Sizes: 1200, 1400, 1600, 1800 mm
STEP 10
Page 9 of 9
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place table top (A) ontop of frame - with cutout at the back of the desk. Using nut inserts in the desk, use
M6x30mm socket (L) and attach desktop to the frame.
Using nut inserts in the desktop, use M6x30mm socket (L) and attach desktop (B) to the frame. Once desktop are
attached and secure to the frame, use woods screws and secure joiner plates to the underside of desktop A.
nut insert nut insert
TABLE TOP
BOTTOM VIEW
L
H
M
B
A
nut insertnut insert
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

JasonL QDW1807.B.WTUS0716BPT Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI