Midmark 6261, 6263 (Powered Carts - AC) Installation guide

6261, 6263 (Powered Carts - AC)
Midmark
Brand
Midmark
Model
6261, 6263 (Powered Carts - AC)
Category
Multimedia carts & stands
Type
Installation guide

Midmark 6261, 6263 (Powered Carts - AC) offer versatile and efficient solutions for transporting heavy loads in various healthcare settings. These carts feature a sturdy design with a weight capacity of up to 1150 lbs (522 kg), making them ideal for moving medical equipment, supplies, and patients. Their powered operation, powered by AC electricity, ensures smooth and effortless movement, even over long distances or inclined surfaces.

Midmark 6261, 6263 (Powered Carts - AC) offer versatile and efficient solutions for transporting heavy loads in various healthcare settings. These carts feature a sturdy design with a weight capacity of up to 1150 lbs (522 kg), making them ideal for moving medical equipment, supplies, and patients. Their powered operation, powered by AC electricity, ensures smooth and effortless movement, even over long distances or inclined surfaces.

9A490001
Installation Instructions
INS-9A490001 (Rev.A)
Warning: Please Use Extreme Caution!
Extend cart to the highest position Place cart, upside down, on a soft
surface such as cardboard, rug, etc.
Remove (4) screws from paddle release assembly (Fig. A) and (1) screw holding cable clip (Fig. B) using
a small phillips drive screwdriver.
1
2
3
Fig. A
Fig. B
Tools required:
Phillips Drive Screw driver
7/32 Allen Wrench
Parts Included:
(1) Cart Handle
(4) 3/8”-16 x 3/4” Long Flat Head Socket Cap Screws
(4) #10 x 1” Long Pan Head Phillips Drive Particle Board Screws
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
Tools required:
Phillips Drive Screw driver
7/32 Allen Wrench
Parts Included:
(1) Cart Handle
(4) 3/8”-16 x 3/4” Long Flat Head Socket Cap Screws
(4) #10 x 1” Long Pan Head Phillips Drive Particle Board Screws
Warning: Please Use Extreme Caution!
Install handle to worksurface.
Attach with (4) 3/8-16 x 3/4” Long Flat
Socket Cap screws.
Install paddle release assembly to handle.
Attach (4) screws holding paddle (See Fig A.)
and (1) screw holding cable clip (see Fig. B)
using a small phillips drive screwdriver.
4
5
Fig. A
Fig. B
Note: There is a specifi c direction of routing the paddle cable. If cable is routed incorrectly, it will
cause the cable to improperly bend causing the paddle to operate incorrectly (See Fig C).
6
Fig C.
Correct
Position
Incorrect
Position
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
9A490001
Installation Instructions
INS-9A490001 (Rev.A)
WARNING: THE CARTRIDGE ASSEMBLY IS SPRING LOADED AND WILL EXPAND OR LENGTHEN
VERY RAPIDLY IF THE RELEASE PADDLE IS ACTIVATED. USE EXTREME CAUTION DURING THE
ASSEMBLY PROCESS TO PREVENT INJURY.
WARNING: TO AVOID INJURY, KEEP YOUR HEAD AND OTHER BODY PARTS AWAY FROM THE
BOTTOM OF THE INVERTED CARTRIDGE ASSEMBLY. IF THE RELEASE PADDLE IS ACTIVATED, THE
CARTRIDGE ASSEMBLY EXPANDS OR LENGTHENS VERY RAPIDLY.
WARNING: THE PLASTIC SAFETY BANDING ON THE CARTRIDGE IS FOR SAFETY PURPOSES.
FOLLOW INSTRUCTIONS AND DO NOT REMOVE BANDING UNTIL THE PROPER
INSTALLATION STEP.
WARNING:: DO NOT ATTEMPT TO DISASSEMBLE OR SERVICE THE CARTRIDGE ASSEMBLY.
CONTENTS ARE SPRING LOADED AND ASSEMBLED UNDER PRESSURE. FAILURE TO COMPLY
WITH THIS WARNING COULD RESULT IN SEVERE INJURY. Unauthorized disassembly of
the Cartridge voids warranty.
Warning: Please Use Extreme Caution!
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
9A490001
Installation Instructions
INS-9A490001 (Rev.A)
  • Page 1 1
  • Page 2 2
  • Page 3 3

Midmark 6261, 6263 (Powered Carts - AC) Installation guide

6261, 6263 (Powered Carts - AC)
Midmark
Brand
Midmark
Model
6261, 6263 (Powered Carts - AC)
Category
Multimedia carts & stands
Type
Installation guide

Midmark 6261, 6263 (Powered Carts - AC) offer versatile and efficient solutions for transporting heavy loads in various healthcare settings. These carts feature a sturdy design with a weight capacity of up to 1150 lbs (522 kg), making them ideal for moving medical equipment, supplies, and patients. Their powered operation, powered by AC electricity, ensures smooth and effortless movement, even over long distances or inclined surfaces.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents