Troy-Bilt 21D64M8711 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

778-11932 A© 2011 21D-64M1
Remove the hardware from the lower handle
and support brackets.
Insert the Z-fitting into the hole
in the Forward Clutch Bail.
Snap cable connector into bottom hole
in cable bracket.
Forward Clutch Cable
Lower Handle
Forward Clutch Bail
Upper Handle
Handle Support
Brackets
Tools Required:
Two • /-inch wrenches (or adjustable wrenches)
Loosely attach
the lower handle
to the upper handle
using two 1.5” hex screws
and flange lock nuts.
Do not tighten hardware.
Attach upper handle and
handle support brackets
to lower handle using
the 6.75” carriage bolt,
bell washer and knob.
Tighten all hardware
attached in Step 1
and Step 2.
1
4
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Gas Cap
Throttle
Control
Starter Rope
Handle
Choke
Control
Oil Fill
Fill fuel tank with clean, fresh
gasoline until fuel reaches the fuel
level indicator.
Pour the entire contents of the
oil bottle (included in carton)
into the oil fill.
Grasp starter rope handle
and pull with quick, full-arm stroke.
When engine starts, slowly move choke
control into the Run
position.
778-11932 A© 2011 21D-64M1
Move throttle control into the
Fast
position.
Move the choke control
into the Choke
position.
6
9
7
10
8
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 21D64M8711 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI