Troy-Bilt 21A39M8711 Installation guide

Troy-Bilt
Brand
Troy-Bilt
Model
21A39M8711
Type
Installation guide

This manual is also suitable for

Tools Required:
• /-inch wrench (or adjustable wrench)
Reverse Tine
Engagement Lever
Handle
Tiller Tines
End Cap
Depth Gauge
Handle Knob
Forward Tine
Engagement Lever
Identify FORWARD (A) and REVERSE (B)
clutch cables. Hook Z-end of each cable into
its proper directional engagement lever.
Remove hex bolt and washer from right
side of frame (1), hold bracket on left side
of frame and guide handle into place (2).
Insert bolt, from the right, through cupped
washer, frame, handle, and into bracket on
left side.
Remove the 2 hex bolts from the depth stake
assembly, insert assembly into frame, reinstall
hex bolts, and secure depth stake with clevis pin
and cotter pin.
To adjust wheel height remove cotter pin
from clevis pin, clevis pin from wheel yoke
and slide depth stake in the yoke to the
desired height. Reinstall hardware.
Adjust forward and reverse drive cables
before operating by loosening hex nut
and turning the cable collar one or two
turns to increase or decrease tension on
the cable. Retighten lock nut.
778-13476© 2012 21B-34M
A
B
1
2
3
Tighten bolt securely.
Handle
Brace
Hand
Knob
Bell Washer
Carriage
Bolt
Depth Stake
Assembly
Hex Bolts
Clevis Pin
Depth Stake
Cotter Pin
Wheel Yoke
Cable Collar
Hex Nut
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Gas Cap
Throttle
Control
Starter Rope
Handle
Choke
Control
Oil Fill
Fill fuel tank with clean, fresh
gasoline until fuel reaches the fuel
level indicator.
Pour the entire contents of the
oil bottle (included in carton)
into the oil fill.
Grasp starter rope handle
and pull with quick, full-arm
stroke.
When engine starts, slowly
move choke control into the
Run position.
Move throttle control into the
Fast position.
Move the choke
control
into the Choke
position.
778-13476© 2015 21A-39M
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 21A39M8711 Installation guide

Troy-Bilt
Brand
Troy-Bilt
Model
21A39M8711
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents