destaco.com
Automating Tomorrow™
WARNING: This is a controlled document. It is your responsibility to deliver this information to the end user of the
Destaco Robohand product. Failure to deliver this could result in your liability for injury to the user or damage to the
machine. For copies of this manual, call your Customer Service Representative at 1.248.836.6700
ROBOHAND
Service Manual
DLT Internally Powered Series
Dimensions and technical information are subject to change without notice
146
Linear Slides | Maintenance and Assembly Procedure
DLT-B, E, L Series
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
4.60
DLT B, E, L
SERIES
MAINTENANCE
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox™
Lubricant
Teflon®Based
Grease
Lightweight
Machine Oil
Super
Bonder
(4 BEARINGS)
(4 SCREWS)
SK
SK
SK
SK
10
40
4
311
9
5
8
15
2
1
7
6
DLT-B, E, L Series Exploded View
Item Qty Name
01 1 Body
02 4 Bushing
03 1 Tooling Plate
04 1 Nut, Stover
05 1 Piston Rod
06 1 Piston
07 1 Cap, Plug End
08 1 Cap, Rod End
09 2 Shock Pad,Urethane
10 1 Guide Shaft
11 2 Collar, Split
15 1 Shock Pad, Urethane
40 1 Magnet
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
Assembly Procedure
1) Lubricate and install seals.
2) Attach piston to piston shaft.
3) Install magnet on piston.
4) Install plug endcap and retaining ring
into body.
5) Attach piston, piston shaft, and rod
end cap to body and install retainer
ring.
6) Install bearings and shafts into body.
7) Attach shock pads and clamp collars
to rod end of shafts.
8) Install tool plate on rod end of shafts,
and attach cylinder rod to plate.
9) Adjust clamp collars and fasten them
in desired position.
Seal Repair Kit Order #’s
See Product Data Sheets
SK
4.038-4.081RED.qxd 2/3/06 2:38 PM Page 60
Dimensions and technical information are subject to change without notice 147
Linear Slides | Maintenance and Assembly Procedure
DLT-B, E, L Series
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
4.61
DLT B, E, L
SERIES
MAINTENANCE
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox™
Lubricant
Teflon®Based
Grease
Lightweight
Machine Oil
Super
Bonder
DLT-B, E, L Series Assembled View
1
2
3
4
5
6
15
10
11
9
8
40
7
Item Qty Name
01 1 Body
02 4 Bushing
03 1 Tooling Plate
04 1 Nut, Stover
05 1 Piston Rod
06 1 Piston
07 1 Cap, Plug End
08 1 Cap, Rod End
09 2 Shock Pad,Urethane
10 1 Guide Shaft
11 2 Collar, Split
15 1 Shock Pad, Urethane
40 1 Magnet
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
NOTE: For accessory mounting, see
product data sheets
4.038-4.081RED.qxd 2/3/06 2:38 PM Page 61
Global Locations
NORTH AMERICA
Corporate Headquarters
Auburn Hills, Michigan
Toll Free: 1.888.DESTACO
Marketing: [email protected]
Global Technology Center
Auburn Hills, Michigan
Tel: 1.248.836.6700
Customer Service: [email protected]
Mt. Juliet, Tennessee
Tel: 1.888.DESTACO
Customer Service: [email protected]
Wheeling, Illinois
Tel: 1.800.645.5207
Customer Service: [email protected]
Red Wing, Minnesota (Central Research Laboratories)
Tel: 651.385.2142
Customer Service: [email protected]
ASIA
Bangkok, Thailand
Tel: +66-2-326-0812
Customer Service: [email protected]
Shanghai, China
Tel: +86-21-6081-2888
Customer Service: [email protected]
Bangalore, India
Tel: +91-80-41123421-426
Customer Service: [email protected]
EUROPE
Oberursel, Germany
Tel: +49-6171-705-0
Customer Service: [email protected]
Sainte Florine, France
Tel: +33-4-73545001
Customer Service: [email protected]
Wolverhampton, United Kingdom
Tel: +44-1902-797980
Customer Service: [email protected]
Sant Boi de LLobregat, Spain
Tel: +34-936361680
Customer Service: [email protected]
Uithoorn, Netherlands
Tel: +31-297285332
Customer Service: [email protected]
Spain
Netherlands
UK
France
India
Thailand
China
Mt. Juliet, TN USA
Auburn Hills, MI USA
Germany
Red Wing, MN USA
Wheeling, IL USA
© Copyright, 2019 DESTACO. All rights for layout, photos and text rest with the publisher
DESTACO. All photomechanical or other reproductions only with our express permission.
All sales are based on our terms and conditions of sale, delivery and payment. IN_SM-DLT-INT_03/19
/
