destaco.com
Automating Tomorrow™
WARNING: This is a controlled document. It is your responsibility to deliver this information to the end user of the
Destaco Robohand product. Failure to deliver this could result in your liability for injury to the user or damage to the
machine. For copies of this manual, call your Customer Service Representative at 1.248.836.6700
ROBOHAND
Service Manual
DLT Externally Powered Series
Dimensions and technical information are subject to change without notice
150
Linear Slides | Maintenance and Assembly Procedure
DLT-T, a, n, u Series
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
4.74
DLT -T, A, N, R, U
SERIES
MAINTENANCE
4.74
(4 BEARINGS)
(4 SCREWS)
3
30
6
4
5
12
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox™
Lubricant
Teflon®Based
Grease
Lightweight
Machine Oil
Super
Bonder
DLT-T, A, N, R, U Series Exploded View
Item Qty Name
01 1 Body, Externally Powered
02 1 Cylinder
03 1 Tooling Plate
04 1 Shaft, Extender
05 4 Bushing
06 2 Guide Shaft
30 1 Nut, Stover
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
Assembly Procedure
1) Install bearings and shafts into body.
2) Attach shaft extender to cylinder rod
and install through body.
3) Fasten tool plate to shaft ends.
4) Install shaft extender to tool plate.
Seal Repair Kit Order #’s
See Product Data Sheets
SK
Dimensions and technical information are subject to change without notice 151
Linear Slides | Maintenance and Assembly Procedure
DLT-T, a, n, R, u Series
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
4.75
DLT -T, A, N, R, U
SERIES
MAINTENANCE
30
3
1
2
6
4
5
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox™
Lubricant
Teflon®Based
Grease
Lightweight
Machine Oil
Super
Bonder
DLT-T, A, N, R, U Series Assembled View
Item Qty Name
01 1 Body, Externally Powered
02 1 Cylinder
03 1 Tooling Plate
04 1 Shaft, Extender
05 4 Bushing
06 2 Guide Shaft
30 1 Nut, Stover
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
NOTE: For accessory mounting, see
product data sheets
CYLINDER VALVE
Main
Supply
Auxiliary
Supply
LOCK VALVE
5 WAY, 3 POS
3 WAY, 2 POS
G1/8
EXHAUST PORT
LOCKING CYLINDER -R
PLUMBING DIAGRAM (external pilot)
(internal pilot)
Lock valve must be maintained
energized during cylinder motion,
otherwise lock is engaged and
cylinder valve shifts to mid position.
Cylinder valve must be maintained
energized during extend or retract.
Also, keep energized at end of stroke
until change of direction is desired.
Mid-position of 5/3 cylinder valve
may be pressurized outlets if the
combinaton of pressure load on the
cylinder and inertia effects of the
attached load do not exceed the
holding force rating of the locking
device, including allowance for wear.
DO NOT use cylinder lines for any
logic functions - pressure levels vary
too much.
1)
2)
3)
4)
Dimensions and technical information are subject to change without notice
152
Linear Slides | Maintenance and Assembly Procedure
DLT-30, 35 Series
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
4.80
DLT-30 & 35
SERIES
MAINTENANCE
3
7
1
18
5
8
14
(4 SCREWS)
(4 BEARINGS)
(3 SCREWS)
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox™
Lubricant
Teflon®Based
Grease
Lightweight
Machine Oil
Super
Bonder
DLT-30 & 35 Series Exploded View
Item Qty Name
01 1 Body
03 1 Tooling Plate
05 4 Bearing, Linear
07 2 Shaft
08 1 Cylinder
14 1 Coupler
18 2 Impact Button
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
Assembly Procedure
1) Install bearings and shafts into body.
2) Attach cylinder to body.
3) Fasten tool plate to shaft ends.
4) Install cylinder rod to tool plate.
Seal Repair Kit Order #’s
See Product Data Sheets
SK
Dimensions and technical information are subject to change without notice 153
Linear Slides | Maintenance and Assembly Procedure
DLT-30, 35, -R Series
For more information call us at: 1-800-ROBOHAND or 203-261-5558 Fax: 203-452-7418 Visit us on the Internet at: www.destaco.com
4.81
DLT-30 & 35
SERIES
MAINTENANCE
1
3
5
7
8
Third Angle
Projection
Seal Kit
Items
Thread
Locker
Krytox™
Lubricant
Teflon®Based
Grease
Lightweight
Machine Oil
Super
Bonder
DLT-30 & 35 Series Assembled View
Item Qty Name
01 1 Body
03 1 Tooling Plate
05 4 Bearing, Linear
07 2 Shaft
08 1 Cylinder
14 4 Rod, Tie
18 2 Impact Button
NOTE: Contact the Robohand Sales
Department for a complete spare parts
list with order numbers and prices.
NOTE: For accessory mounting, see
product data sheets
CYLINDER VALVE
Main
Supply
Auxiliary
Supply
LOCK VALVE
5 WAY, 3 POS
3 WAY, 2 POS
G1/8
EXHAUST PORT
LOCKING CYLINDER -R
PLUMBING DIAGRAM (external pilot)
(internal pilot)
Lock valve must be maintained
energized during cylinder motion,
otherwise lock is engaged and
cylinder valve shifts to mid position.
Cylinder valve must be maintained
energized during extend or retract.
Also, keep energized at end of stroke
until change of direction is desired.
Mid-position of 5/3 cylinder valve
may be pressurized outlets if the
combinaton of pressure load on the
cylinder and inertia effects of the
attached load do not exceed the
holding force rating of the locking
device, including allowance for wear.
DO NOT use cylinder lines for any
logic functions - pressure levels vary
too much.
1)
2)
3)
4)
Global Locations
NORTH AMERICA
Corporate Headquarters
Auburn Hills, Michigan
Toll Free: 1.888.DESTACO
Marketing: [email protected]
Global Technology Center
Auburn Hills, Michigan
Tel: 1.248.836.6700
Customer Service: [email protected]
Mt. Juliet, Tennessee
Tel: 1.888.DESTACO
Customer Service: [email protected]
Wheeling, Illinois
Tel: 1.800.645.5207
Customer Service: [email protected]
Red Wing, Minnesota (Central Research Laboratories)
Tel: 651.385.2142
Customer Service: [email protected]
ASIA
Bangkok, Thailand
Tel: +66-2-326-0812
Customer Service: [email protected]
Shanghai, China
Tel: +86-21-6081-2888
Customer Service: [email protected]
Bangalore, India
Tel: +91-80-41123421-426
Customer Service: [email protected]
EUROPE
Oberursel, Germany
Tel: +49-6171-705-0
Customer Service: [email protected]
Sainte Florine, France
Tel: +33-4-73545001
Customer Service: [email protected]
Wolverhampton, United Kingdom
Tel: +44-1902-797980
Customer Service: [email protected]
Sant Boi de LLobregat, Spain
Tel: +34-936361680
Customer Service: [email protected]
Uithoorn, Netherlands
Tel: +31-297285332
Customer Service: [email protected]
Spain
Netherlands
UK
France
India
Thailand
China
Mt. Juliet, TN USA
Auburn Hills, MI USA
Germany
Red Wing, MN USA
Wheeling, IL USA
© Copyright, 2019 DESTACO. All rights for layout, photos and text rest with the publisher
DESTACO. All photomechanical or other reproductions only with our express permission.
All sales are based on our terms and conditions of sale, delivery and payment. IN_SM-DLT-EXT_03/19
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
DESTACO DLT-B E L User manual
-
DESTACO RA-CAM Series User manual
-
DESTACO DLB-T A N U User manual
-
DESTACO RR Series User manual
-
DESTACO RR-56 66 76 Series User manual
-
DESTACO Escapements Series User manual
-
DESTACO DLB-B L User manual
-
DESTACO RPM-RPMC Series User manual
-
DESTACO RPW Series User manual
-
DESTACO RPL-RPLC Series User manual
Other documents
-
SEM ME-P3E Mag EraSURE Operating instructions
-
Advantech DLT-V8312 Quick Start And Installation Manual
-
-
-
Advantech DLT-V72 User manual
-
Advantech DLT-V83 User manual
-
Advantech-DLoG DLT-V7212 P Operating Instructions Manual
-
-
Hoshizaki KMS-830MLJ User manual
-
