Aruba 9300-32D User guide

AOS-CX 10.12 Command-Line

Interface Guide

9300 Switch Series

Published: August 2023

Edition: 1

|2

Copyright Information

This product includes code licensed under certain open source licenses which require source

compliance. The corresponding source for these components is available upon request. This offer is

valid to anyone in receipt of this information and shall expire three years following the date of the final

distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source

code, please check if the code is available in the HPE Software Center at

https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific

software version and product for which you want the open source code. Along with the request, please

send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company

Attn: General Counsel

WW Corporate Headquarters

1701 E Mossy Oaks Rd Spring, TX 77389

United States of America.

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett

Packard Enterprise products and services are set forth in the express warranty statements

accompanying such products and services. Nothing herein should be construed as constituting an

additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or

omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,

use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer

Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government

under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard

Enterprise website.

For more information, see the KM Process Guide. ?>

Acknowledgments

Bluetooth is a trademark owned by its proprietor and used by Hewlett Packard Enterprise under

license.

Contents

Contents 3

About this document 41

Applicable products 41

What's new in this release 41

Latest version available online 44

Command syntax notation conventions 44

About the examples 45

Identifying switch ports and interfaces 46

Introduction to the AOS-CX CLI 47

CLI access 47

Getting CLI help 47

Authority levels 48

Command contexts 49

Operator context (>) 49

Navigating to the operator context (>) 49

Auditor context 49

Manager context (#) 50

Navigating to the manager context (#) 50

Global configuration context (config) 50

Navigating to the config context 51

Other configuration command contexts 51

Support for range contexts 52

Rules for range contexts 54

Command history 54

Command completion 55

Pipe (|) support in show commands 55

Command syntax notation conventions 56

Service OS CLI commands 57

boot 57

cat 57

cd path 58

config-clear 59

cp 59

du 61

erase zeroize 62

exit 63

format 64

identify 65

ip 65

ls 66

md5sum 68

mkdir 69

mount 70

mv 71

password (svos) 72

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 3

Contents |4

ping 72

pwd 73

reboot 74

rm 74

rmdir 75

secure-mode 76

sh 77

umount 78

update 79

tftp 80

version 81

ACL commands 83

ACL application 83

access-list copy 84

access-list ip 87

access-list ipv6 96

access-list log-timer 103

access-list mac 106

access-list resequence 112

access-list reset 114

apply access-list control-plane 117

apply access-list (to interface or LAG) 118

apply access-list (to interface VLAN) 120

apply access-list (to VLAN) 122

clear access-list hitcounts 124

clear access-list hitcounts control-plane 125

object-group address resequence 126

object-group address reset 127

object-group all reset 128

object-group ip address 129

object-group ipv6 address 131

object-group port 133

object-group port resequence 135

object-group port reset 136

show access-list 137

show access-list control-plane 142

show access-list hitcounts 144

show access-list hitcounts control-plane 147

show capacities 148

show capacities-status 149

show object-group 151

ACL and Policy hardware resource commands 154

show resources 154

ARP commands 156

arp ipv4 mac 156

arp process-grat-arp 157

clear arp 158

ip local-proxy-arp 159

ip proxy-arp 160

ipv6 neighbor mac 161

show arp 161

show arp state 162

show arp summary 164

show arp timeout 165

show arp vrf 166

show ipv6 neighbors 167

show ipv6 neighbors state 168

Aruba Central commands 171

aruba-central 171

aruba-central support-mode 171

configuration-lockout central managed 172

disable 173

enable 174

location-override 175

location-override-alternative 176

show aruba-central 177

show running-config current-context 180

Banner commands 182

banner 182

show banner 183

BFD Commands 185

bfd 185

bfd <IPV4-ADDR> 185

bfd all-interfaces 186

bfd detect-multiplier 188

bfd disable 188

bfd enable (Context: config-hsc) 189

bfd disable (Context: config-hsc) 190

bfd echo disable 190

bfd min-echo-receive-interval 192

bfd min-receive-interval 193

bfd min-transmit-interval 194

clear bfd statistics 195

ip ospf bfd 196

ip ospf bfd disable 197

ip route bfd 197

ipv6 ospfv3 bfd 198

ipv6 ospfv3 bfd disable 199

neighbor fall-over bfd 200

show bfd 201

show bfd interface 203

show hsc 205

BGP commands 206

address-family 206

aggregate-address 207

bgp always-compare-med 208

bgp asnotation dotted 209

bgp asnotation dotted-plus 210

bgp bestpath as-path ignore 210

bgp bestpath as-path multipath-relax 211

bgp bestpath compare-routerid 212

bgp bestpath med confed 213

bgp bestpath med missing-as-worst 214

bgp cluster id 214

bgp confederation 215

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 5

Contents |6

bgp confederation peers 216

bgp dampening 217

bgp default local-preference 218

bgp deterministic-med 219

bgp fast-external-fallover 220

bgp graceful-restart restart-time 221

bgp graceful-restart stalepath-time 222

bgp log-neighbor-changes 223

bgp maxas-limit 223

bgp router-id 224

clear bgp 225

disable|enable 226

distance bgp 227

maximum-paths 227

neighbor activate 228

neighbor advertisement-interval 229

neighbor add-paths 230

neighbor add-paths advertise-best 231

neighbor allowas-in 232

neighbor ao 234

neighbor capability orf prefix-list 235

neighbor default-originate 237

neighbor ebgp-multihop 237

neighbor fall-over 238

neighbor fall-over bfd 239

neighbor graceful-shutdown 241

neighbor listen ip-range 243

neighbor local-as 245

neighbor maximum-prefix 246

neighbor next-hop-self 247

neighbor next-hop-unchanged 249

neighbor orf prefix-list in 250

neighbor passive 251

neighbor password 252

neighbor port 253

neighbor remote-as 254

neighbor remove-private-AS 255

neighbor route-map 256

neighbor route-reflector-client 258

neighbor send-community 259

neighbor shutdown 260

neighbor soft-reconfiguration inbound 261

neighbor timers 262

neighbor ttl-security-hops 263

neighbor update-source 264

neighbor weight 265

network 266

redistribute 267

router bgp 269

show bgp 270

show bgp <PREFIX> 273

show bgp community 275

show bgp flap-statistics 279

show bgp neighbor advertised-routes 280

show bgp neighbor paths 282

show bgp neighbor received orf-prefix-list 283

show bgp neighbor received-routes 285

show bgp neighbor routes 286

show bgp neighbors 288

show bgp paths 291

show bgp peer-group summary 292

show bgp summary 294

show bgp l2vpn evpn vni route-type 297

show bgp l2vpn evpn vtep 298

show bgp l2vpn evpn vtep route-type 299

show bgp l2vpn evpn vtep vni 300

show bgp l2vpn evpn vtep vni route-type 301

show running-config bgp 302

timers bgp 303

vrf 304

Boot commands 306

boot set-default 306

boot system 306

show boot-history 308

Breakout cable support commands 311

split 311

CDP commands 313

cdp 313

clear cdp counters 314

clear cdp neighbor-info 314

show cdp 315

show cdp neighbor-info 316

show cdp traffic 317

Checkpoint commands 318

checkpoint auto 318

checkpoint auto confirm 319

checkpoint diff 320

checkpoint post-configuration 321

checkpoint post-configuration timeout 322

checkpoint rename 323

checkpoint rollback 324

copy checkpoint <CHECKPOINT-NAME> <REMOTE-URL> 325

copy checkpoint <CHECKPOINT-NAME> {running-config | startup-config} 326

copy checkpoint <CHECKPOINT-NAME> <STORAGE-URL> 327

copy <REMOTE-URL> checkpoint <CHECKPOINT-NAME> 328

copy <REMOTE-URL> {running-config | startup-config} 329

copy running-config {startup-config | checkpoint <CHECKPOINT-NAME>} 331

copy {running-config | startup-config} <REMOTE-URL> 332

copy {running-config | startup-config} <STORAGE-URL> 333

copy startup-config running-config 334

copy <STORAGE-URL> running-config 335

erase 337

show checkpoint <CHECKPOINT-NAME> 338

show checkpoint <CHECKPOINT-NAME> hash 340

show checkpoint post-configuration 341

show checkpoint 342

show checkpoint date 343

show running-config hash 343

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 7

Contents |8

show startup-config hash 344

write memory 345

Classifier policy commands 347

Classifier policy application 347

apply policy (config-if, config-lag-if, config-if-vlan, config-vlan) 347

apply policy 351

class copy 352

class ip 354

class ipv6 361

class mac 367

class resequence 371

class reset 373

clear policy hitcounts 373

policy 375

policy copy 380

policy resequence 380

policy reset 381

show class 382

show policy 384

CLI session commands 389

alias 389

auto-confirm 390

configure terminal 391

disable 392

do 392

enable (manager context) 393

end 394

exit 394

list 395

page 395

Pipe (|) command 396

repeat 397

session-timeout 398

show session-timeout 399

show alias 399

show history 400

CLI user session management commands 402

cli-session 402

Clock commands 405

clock date 405

clock datetime 405

clock time 406

clock timezone 407

show clock 407

Container management commands 409

container 409

container exec 409

env 410

image-location 411

restrict cpu 412

restrict memory 413

show container 413

show capacities containers 415

show capacities-status containers 415

show running-config container 416

vrf 417

CoPP commands 418

Classes of traffic 418

apply copp-policy 419

class 420

clear copp-policy statistics 422

copp-policy 423

default-class 424

reset copp-policy 425

show copp-policy 426

show copp-policy factory-default 428

show copp-policy statistics 430

show tech copp 431

Debug logging commands 433

clear debug buffer 433

debug {all | <MODULE-NAME>} 434

debug db 435

debug destination 437

show debug 439

show debug buffer 440

show debug destination 441

DHCP client commands 443

ip dhcp 443

show ip dhcp 444

DHCPv4 relay commands 445

dhcp-relay 445

dhcp-relay hop-count-increment 445

dhcp-relay l2vpn-clients 446

dhcp-relay option 82 447

dhcp-smart-relay 448

diag-dump dhcp-relay basic 449

ip bootp-gateway 451

ip helper-address 451

show dhcp-relay 453

show dhcp-relay bootp-gateway 454

show ip helper-address 455

DHCP relay (IPv6) commands 457

dhcpv6-relay 457

dhcpv6-relay option 79 458

ipv6 helper-address 458

show dhcpv6-relay 460

show ipv6 helper-address 460

DHCP server IPv4 commands 462

authoritative 462

bootp 462

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 9

Contents |10

clear dhcp-server leases 464

default-router 465

dhcp-server external-storage 466

dhcp-server vrf 467

disable 468

dns-server 468

domain-name 469

enable 470

lease 471

netbios-name-server 472

netbios-node-type 473

option 473

pool 474

range 475

show dhcp-server 477

static-bind 479

DHCP server IPv6 commands 481

authoritative 481

clear dhcpv6-server leases 482

dhcpv6-server external-storage 483

dhcpv6-server vrf 484

disable 485

dns-server 485

enable 486

lease 487

option 488

pool 489

range 490

show dhcpv6-server 491

static-bind 493

DHCP options commands 495

http-proxy 495

DNS client commands 497

ip dns domain-list 497

ip dns domain-name 498

ip dns host 499

ip dns server address 500

show ip dns 501

ECMP commands 504

show ip ecmp 504

ERPS Commands 506

clear erps ring <RINGID> instance <ID> 506

clear erps statistics 506

erps ring 507

erps ring <RINGID> <port0|port1> interface 508

erps ring <RINGID> description 509

erps ring <RINGID> guard-interval 510

erps ring <RINGID> hold-off-interval 511

erps ring <RINGID> instance 512

erps ring <RINGID> instance <ID> control-vlan 513

erps ring <RINGID> instance <ID> description 514

erps ring <RINGID> instance <ID> enable 515

erps ring <RINGID> instance <ID> protected-vlans 516

erps ring <RINGID> instance <ID> protection-switch {{manual|force} <PORT0>|<PORT1>} 517

erps ring <RINGID> instance <ID> revertive 519

erps ring <RINGID> instance <ID> role 520

erps ring <RINGID> instance <ID> rpl 521

erps ring <RINGID> meg-level 522

erps ring <RINGID> parent-ring 523

erps ring <RINGID> sub-ring 524

erps ring <RINGID> tcn-propogation 525

erps ring <RINGID> transmission-interval 526

erps ring <RINGID> wtr-interval 527

show erps statistics 528

show erps status 529

show erps summary 532

EVPN commands 533

active-gateway 533

arp-suppression 535

dyn-vxlan-tunnel-bridging-mode 536

disable (evpn vlan-aware-bundles) 537

enable(evpn vlan-aware-bundles) 538

evpn 538

mac-move-detection count timer 539

nd-suppression 540

rd 541

rd (evpn vlan-aware-bundles) 542

redistribute host-route 543

redistribute host-route (evpn vlan-aware-bundles) 544

redistribute local-mac 545

redistribute local-svi 545

route-target 546

route-target {evpn} 547

route-target (evpn vlan-aware-bundles) 548

show evpn evi 550

show evpn evi summary 551

show evpn evi <EVI-ID> 552

show evpn evi detail 553

show evpn evi <EVI-ID> detail 555

show evpn mac-ip 555

show evpn mac-ip evi 556

show evpn vtep-neighbor 557

show running-config evpn 558

virtual-mac 559

vlan 560

vlan-aware-bundle 561

vlan-ethernet-tag (evpn vlan-aware-bundles) 561

vlan <ID-RANGE> 562

External storage commands 564

address 564

directory 565

disable 566

enable 566

external-storage 567

password (external-storage) 568

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 11

Contents |12

show external-storage 569

show running-config external-storage 570

type 570

username 571

vrf 572

Fault monitor commands 574

(Fault enabling/disabling) 574

action 575

apply fault-monitor profile 578

fault-monitor profile 579

show fault-monitor profile 580

show interface fault-monitor profile 581

show interface fault-monitor status 582

show running-config 583

threshold 585

vsx-sync (fault monitor) 587

Firmware management commands 589

copy {primary | secondary} <REMOTE-URL> 589

copy {primary | secondary} <FIRMWARE-FILENAME> 590

copy primary secondary 591

copy <REMOTE-URL> 591

copy secondary primary 593

copy <STORAGE-URL> 594

copy hot-patch 595

hot-patch 597

show hot-patch 598

High Availability Commands 600

redundancy switchover 600

HSC commands 602

bfd enable 602

bfd disable 602

disable 603

enable 604

hsc 604

manager ip 605

manager port 606

HTTPS server commands 608

https-server authentication certificate 608

https-server authentication password 609

https-server max-user-sessions 609

https-server rest access-mode 610

https-server rest firmware-site-distribution 611

https-server session close all 612

https-server session-timeout 613

https-server vrf 614

show https-server 615

show https-server authentication 616

ICMP commands 618

ip icmp redirect 618

ip icmp throttle 618

ip icmp unreachable 619

IGMP commands 621

ip igmp 621

ip igmp apply access-list 622

ip igmp last-member-query-interval 623

ip igmp querier 624

ip igmp querier interval 625

ip igmp querier query-max-response-time 626

ip igmp robustness 627

ip igmp router-alert-check 628

ip igmp static-group 629

ip igmp version 630

ip igmp version strict 631

no ip igmp 632

show ip igmp 632

show ip igmp counters 635

show ip igmp group 637

show ip igmp groups 639

show ip igmp interface 642

show ip igmp interface counters 643

show ip igmp interface group 644

show ip igmp interface groups 646

show ip igmp interface statistics 647

show ip igmp static-groups 648

show ip igmp statistics 649

IGMP snooping commands 652

ip igmp snooping (config mode) 652

ip igmp snooping (interface mode) 653

ip igmp snooping (vlan mode) 655

show ip igmp snooping 657

In-System Programming commands 661

clear update-log 661

show needed-updates 661

Interface commands 663

allow-unsupported-transceiver 663

default interface 665

description 666

error-control 666

flow-control 667

flow-control buffer headroom 672

flow-control buffer xon 673

flow-control buffer xoff dynamic 674

flow-control buffer xoff static 675

flow-control watchdog 677

flow-control watchdog timeout resume 678

interface 679

interface loopback 680

interface vlan 680

ip address 681

ip mtu 683

ipv6 address 684

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 13

Contents |14

l3-counters 685

mtu 686

persona 687

rate-interval 689

routing 690

show allow-unsupported-transceiver 691

show interface 692

show interface dom 697

show interface flow-control 698

show interface statistics 703

show interface transceiver 706

show interface utilization 710

show ip interface 711

show ip source-interface 712

show ipv6 interface 713

show ipv6 source-interface 715

shutdown 716

system interface-group 717

IP Directed Broadcast commands 719

copy support-file feature 719

ip directed-broadcast 719

show arp 720

show ip interface 721

show ip directed-broadcast 722

IP Neighbor Flood commands 724

ip neighbor-flood 724

show ip interface 724

show ip neighbor-flood 725

show running-config 726

IP-SLA commands 728

http 728

https 729

icmp-echo 730

ip-sla 731

ip-sla responder 732

show ip-sla responder 733

show ip-sla responder results 734

show ip-sla 735

start-test 739

stop-test 740

tcp-connect 740

udp-echo 741

udp-jitter-voip 743

vrf 744

IP tunnels commands 746

description 746

destination ip 747

destination ipv6 748

interface tunnel 749

ip address 751

ipv6 address 752

ip mtu 753

show interface tunnel 754

show running-config interface tunnel 756

shutdown 757

source ip 758

source ipv6 759

ttl 760

vrf attach 761

IPv6 RA commands 764

ipv6 address <global-unicast-address> 764

ipv6 address autoconfig 765

ipv6 address link-local 766

ipv6 nd cache-limit 767

ipv6 nd dad attempts 767

ipv6 nd hop-limit 768

ipv6 nd mtu 769

ipv6 nd ns-interval 769

ipv6 nd prefix 770

ipv6 nd ra dns search-list 772

ipv6 nd ra dns server 773

ipv6 nd ra lifetime 774

ipv6 nd ra managed-config-flag 775

ipv6 nd ra max-interval 776

ipv6 nd ra min-interval 777

ipv6 nd ra other-config-flag 777

ipv6 nd ra reachable-time 778

ipv6 nd ra retrans-timer 779

ipv6 nd route 780

ipv6 nd router-preference 781

ipv6 nd suppress-ra 782

show ipv6 nd global traffic 782

show ipv6 nd interface 783

show ipv6 nd interface prefix 786

show ipv6 nd interface route 787

show ipv6 nd ra dns search-list 788

show ipv6 nd ra dns server 789

IRDP commands 791

diag-dump irdp basic 791

ip irdp 792

ip irdp holdtime 793

ip irdp maxadvertinterval 794

ip irdp minadvertinterval 795

ip irdp preference 795

show ip irdp 796

IVRF commands 798

address-family 798

ip|ipv6 vrf 799

ipv6 route source interface 800

ip route interface 802

rd 805

redistribute 806

route-target 807

route-target export 809

router bgp 810

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 15

Contents |16

router bgp vrf 811

show bgp vpn unicast 812

show bgp info vrf 816

show ip route vrf 817

show ipv6 route vrf 818

vrf 819

Job Scheduler commands 821

job 821

schedule 823

show job 826

show capacities (job, schedule) 829

show running-config (job, schedule) 829

show schedule 831

Key chain commands 834

accept-lifetime 834

cryptographic-algorithm 835

key 836

keychain 837

key-string 838

name 839

recv-id 840

send-lifetime 841

send-id 842

show capacities keychain 843

show keychain 844

show running-config keychain 846

show interface 847

LACP and LAG commands 853

description 853

interface lag 854

ip address 855

ipv6 address 856

lacp fallback 857

lacp fallback-static 858

lacp mode 859

lacp port-id 860

lacp port-priority 860

lacp rate 861

lacp system-priority 862

lag 863

show interface 864

show lacp aggregates 866

show lacp configuration 867

show lacp interfaces 868

show lag 871

show running-config interface lag 873

shutdown 874

vlan trunk native 874

LLDP commands 877

clear lldp neighbors 877

clear lldp statistics 877

lldp 878

lldp dot3 879

lldp dot3 mfs 880

lldp management-address vlan 880

lldp management-ipv4-address 881

lldp management-ipv6-address 882

lldp med 883

lldp med-location 884

lldp receive 886

lldp reinit 887

lldp select-tlv 888

lldp timer 889

lldp transmit 891

lldp txdelay 892

lldp trap enable 893

show lldp configuration 895

show lldp configuration mgmt 897

show lldp local-device 898

show lldp neighbor-info 899

show lldp neighbor-info detail 902

show lldp neighbor-info mgmt 905

show lldp statistics 907

show lldp statistics mgmt 908

show lldp tlv 909

Local AAA commands 911

aaa accounting all-mgmt 911

aaa authentication console-login-attempts 913

aaa authentication limit-login-attempts 914

aaa authentication login 915

aaa authentication minimum-password-length 916

aaa authorization commands (local) 917

show aaa accounting 919

show aaa authentication 920

show aaa authorization 921

show authentication locked-out-users 922

show ssh authentication-method 923

show user 924

ssh password-authentication 925

ssh public-key-authentication 926

user authorized-key 927

Log rotation commands 929

logging threshold 929

logrotate maxsize 931

logrotate period 931

logrotate target 932

show logrotate 934

Loop protect commands 935

loop-protect 935

loop-protect action 936

loop-protect re-enable-timer 937

loop-protect transmit-interval 938

loop-protect trap loop-detected 938

loop-protect vlan 939

show loop-protect 940

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 17

Contents |18

Loopback commands 944

interface loopback 944

ip address 944

ipv6 address 945

vrf attach 946

show interface loopback 947

MAC address table commands 949

clear mac-address 949

mac-address-table age-time 950

show mac-address-table 951

show mac-address-table address 952

show mac-address-table count 953

show mac-address-table dynamic 955

show mac-address-table interface 956

show mac-address-table lockout 957

show mac-address-table port 958

show mac-address-table static 959

show mac-address-table vlan 959

static-mac 960

Management interface commands 962

default-gateway 962

ip static 963

nameserver 964

show interface mgmt 965

mDNS gateway commands 967

debug mdns 967

description 968

id 968

mdns-sd 969

mdns-sd apply-profile tx 970

mdns-sd enable 971

mdns-sd profile 972

mdns-sd service 972

clear mdns-sd statistics 973

sequence-number 974

show mdns-sd service-entries 975

show mdns-sd statistics 977

show mdns-sd statistics profile 977

show mdns-sd summary 978

show running-config interface 979

show running-config mdns-sd profile 980

show running-config mdns-sd service 981

Mirroring commands 982

clear mirror 982

comment 982

copy tcpdump-pcap 983

copy tshark-pcap 984

destination cpu 985

destination interface 986

destination tunnel 987

diagnostic 989

diag utilities tcpdump 990

disable 992

enable 993

mirror session 994

show mirror 995

source interface 996

MLD snooping global configuration commands 999

ipv6 mld snooping 999

MLD snooping VLAN configuration commands 1000

ipv6 mld snooping 1000

ipv6 mld snooping fastlearn 1001

ipv6 mld snooping fastleave vlan 1001

ipv6 mld snooping forced fastleave vlan 1002

ipv6 mld snooping apply access-list 1003

ipv6 mld snooping auto vlan 1005

ipv6 mld snooping blocked vlan 1005

ipv6 mld snooping forward vlan 1006

ipv6 mld snooping static-group 1007

ipv6 mld snooping version 1008

MLD snooping show commands 1010

show ipv6 mld snooping 1010

show mgmd debug-counters 1013

MLD configuration commands for interface VLAN 1015

ipv6 mld 1015

ipv6 mld apply access-list 1015

no ipv6 mld 1017

ipv6 mld querier 1017

ipv6 mld querier interval 1018

ipv6 mld last-member-query-interval 1019

ipv6 mld querier query-max-response-time 1019

ipv6 mld robustness 1020

ipv6 mld static-group 1021

ipv6 mld version 1022

ipv6 mld version strict 1022

MLD show commands for interface VLAN 1024

show ipv6 mld 1024

MLD configuration commands for interface 1028

ipv6 mld 1028

ipv6 mld apply access-list 1028

no ipv6 mld 1030

ipv6 mld querier 1030

ipv6 mld querier interval 1031

ipv6 mld last-member-query-interval 1032

ipv6 mld querier query-max-response-time 1032

ipv6 mld robustness 1033

ipv6 mld static-group 1034

ipv6 mld version 1035

ipv6 mld version strict 1035

AOS-CX 10.12 Command-Line Interface Guide | (9300 Switch Series) 19

Contents |20

MSDP router config commands 1037

disable 1037

enable 1037

router msdp 1038

sa-interval 1039

sa-limit 1040

MSDP peer configuration commands 1042

connection-retry-interval 1042

connect-source 1042

clear ip msdp peer statistics 1043

description 1044

disable 1045

enable (ip msdp peer) 1046

ip msdp peer 1046

keepalive 1047

mesh-group 1048

passwordn (router msdp) 1049

sa-filter access-list 1050

MSDP show commands 1052

show ip msdp count 1052

show ip msdp peer 1053

show ip msdp sa-cache 1054

show ip msdp summary 1055

MSTP commands 1057

clear spanning-tree statistics 1057

show spanning-tree 1057

show spanning-tree detail 1059

show spanning-tree inconsistent-ports 1061

show spanning-tree mst 1062

show spanning-tree mst-config 1064

show spanning-tree mst detail 1065

show spanning-tree mst <INSTANCE-ID> 1068

show spanning-tree mst <INSTANCE-ID> detail 1070

show spanning-tree mst interface 1071

show spanning-tree summary port 1072

show spanning-tree summary root 1073

spanning-tree 1074

spanning-tree bpdu-filter 1075

spanning-tree bpdu-guard 1076

spanning-tree bpdu-guard timeout 1077

spanning-tree config-name 1078

spanning-tree config-revision 1079

spanning-tree cost 1080

spanning-tree forward-delay 1081

spanning-tree hello-time 1082

spanning-tree instance cost 1083

spanning-tree instance port-priority 1084

spanning-tree instance priority 1085

spanning-tree instance vlan 1086

spanning-tree link-type 1087

spanning-tree loop-guard 1087

spanning-tree max-age 1088

Page is loading ...

Aruba 9300-32D User guide

This manual is also suitable for

Aruba 9300-32D User guide

Related papers

Other documents