Aruba 9300-32D Reference guide

AOS-CX 10.13 Command-Line

Interface Guide

9300 Switch Series

Published: November 2023

Edition: 1

|2

Copyright Information

This product includes code licensed under certain open source licenses which require source

compliance. The corresponding source for these components is available upon request. This offer is

valid to anyone in receipt of this information and shall expire three years following the date of the final

distribution of this product version by Hewlett Packard Enterprise Company. To obtain such source

code, please check if the code is available in the HPE Software Center at

https://myenterpriselicense.hpe.com/cwp-ui/software but, if not, send a written request for specific

software version and product for which you want the open source code. Along with the request, please

send a check or money order in the amount of US $10.00 to:

Hewlett Packard Enterprise Company

Attn: General Counsel

WW Corporate Headquarters

1701 E Mossy Oaks Rd Spring, TX 77389

United States of America.

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett

Packard Enterprise products and services are set forth in the express warranty statements

accompanying such products and services. Nothing herein should be construed as constituting an

additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or

omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession,

use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer

Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government

under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard

Enterprise website.

For more information, see the KM Process Guide. ?>

Acknowledgments

Bluetooth is a trademark owned by its proprietor and used by Hewlett Packard Enterprise under

license.

Contents

Contents 3

About this document 42

Applicable products 42

What's new in this release 42

Latest version available online 44

Command syntax notation conventions 44

About the examples 45

Identifying switch ports and interfaces 45

Introduction to the AOS-CX CLI 47

CLI access 47

Getting CLI help 47

Authority levels 48

Command contexts 49

Operator context (>) 49

Navigating to the operator context (>) 49

Auditor context 49

Manager context (#) 50

Navigating to the manager context (#) 50

Global configuration context (config) 50

Navigating to the config context 51

Other configuration command contexts 51

Support for range contexts 52

Rules for range contexts 54

Command history 54

Command completion 55

Pipe (|) support in show commands 55

Command syntax notation conventions 56

Service OS CLI commands 57

boot 57

cat 57

cd path 58

config-clear 59

cp 59

du 61

erase zeroize 62

exit 63

format 64

identify 65

ip 65

ls 66

md5sum 68

mkdir 69

mount 70

mv 71

password (svos) 72

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 3

Contents |4

ping 72

pwd 73

reboot 74

rm 74

rmdir 75

secure-mode 76

sh 77

system serviceos password-prompt 78

umount 79

update 80

tftp 81

version 82

ACL commands 84

ACL application 84

access-list copy 85

access-list ip 89

access-list ipv6 99

access-list log-timer 107

access-list mac 110

access-list resequence 116

access-list reset 119

apply access-list control-plane 122

apply access-list (to interface or LAG) 123

apply access-list (to interface VLAN) 125

apply access-list (to VLAN) 128

clear access-list hitcounts 129

clear access-list hitcounts control-plane 131

object-group address resequence 131

object-group address reset 132

object-group all reset 133

object-group ip address 134

object-group ipv6 address 136

object-group port 138

object-group port resequence 141

object-group port reset 141

show access-list 142

show access-list control-plane 147

show access-list hitcounts 149

show access-list hitcounts control-plane 152

show capacities 153

show capacities-status 155

show object-group 157

ACL and Policy hardware resource commands 161

show resources 161

ARP commands 166

arp ipv4 mac 166

arp process-grat-arp 167

clear arp 168

ip local-proxy-arp 169

ip proxy-arp 170

ipv6 neighbor mac 171

show arp 171

show arp state 172

show arp summary 174

show arp timeout 175

show arp vrf 176

show ipv6 neighbors 177

show ipv6 neighbors state 178

Aruba Central commands 181

aruba-central 181

aruba-central support-mode 181

configuration-lockout central managed 182

disable 183

enable 184

location-override 185

location-override-alternative 186

show aruba-central 187

show running-config current-context 190

Banner commands 192

banner 192

show banner 193

BFD Commands 195

bfd 195

bfd <IPV4-ADDR> 195

bfd all-interfaces 196

bfd detect-multiplier 198

bfd disable 198

bfd enable (Context: config-hsc) 199

bfd disable (Context: config-hsc) 200

bfd echo disable 200

bfd min-echo-receive-interval 202

bfd min-receive-interval 203

bfd min-transmit-interval 204

clear bfd statistics 205

ip ospf bfd 206

ip ospf bfd disable 207

ip route bfd 207

ipv6 ospfv3 bfd 208

ipv6 ospfv3 bfd disable 209

neighbor fall-over bfd 210

show bfd 211

show bfd interface 214

show hsc 215

BGP commands 217

address-family 217

aggregate-address 218

bgp always-compare-med 219

bgp asnotation dotted 220

bgp asnotation dotted-plus 221

bgp bestpath as-path ignore 221

bgp bestpath as-path multipath-relax 222

bgp bestpath compare-routerid 223

bgp bestpath med confed 224

bgp bestpath med missing-as-worst 225

bgp cluster id 225

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 5

Contents |6

bgp confederation 226

bgp confederation peers 227

bgp dampening 228

bgp default local-preference 229

bgp deterministic-med 230

bgp fast-external-fallover 231

bgp graceful-restart restart-time 232

bgp graceful-restart stalepath-time 233

bgp log-neighbor-changes 234

bgp maxas-limit 234

bgp router-id 235

bgp update-group 236

clear bgp 237

disable|enable 238

distance bgp 239

maximum-paths 240

neighbor activate 241

neighbor advertisement-interval 242

neighbor add-paths 243

neighbor add-paths advertise-best 244

neighbor allowas-in 245

neighbor ao 246

neighbor capability orf prefix-list 248

neighbor default-originate 249

neighbor ebgp-multihop 250

neighbor fall-over 251

neighbor fall-over bfd 252

neighbor graceful-shutdown 254

neighbor listen ip-range 256

neighbor local-as 258

neighbor maximum-prefix 259

neighbor next-hop-self 260

neighbor next-hop-unchanged 262

neighbor orf prefix-list in 263

neighbor passive 264

neighbor password 265

neighbor port 266

neighbor remote-as 267

neighbor remove-private-AS 268

neighbor route-map 269

neighbor route-reflector-client 271

neighbor send-community 272

neighbor shutdown 273

neighbor slow-peer 274

neighbor soft-reconfiguration inbound 275

neighbor timers 276

neighbor ttl-security-hops 277

neighbor update-source 278

neighbor weight 279

network 280

redistribute 281

router bgp 283

show bgp 284

show bgp <PREFIX> 287

show bgp community 290

show bgp flap-statistics 293

show bgp neighbor advertised-routes 294

show bgp neighbor paths 296

show bgp neighbor received orf-prefix-list 298

show bgp neighbor received-routes 299

show bgp neighbor routes 301

show bgp neighbors 302

show bgp paths 307

show bgp peer-group summary 308

show bgp summary 310

show bgp l2vpn evpn vni route-type 313

show bgp l2vpn evpn vtep 314

show bgp l2vpn evpn vtep route-type 315

show bgp l2vpn evpn vtep vni 316

show bgp l2vpn evpn vtep vni route-type 317

show running-config bgp 318

timers bgp 319

vrf 320

BIDIR-PIM commands 321

ip pim-bidir 321

ip pim-bidir hello-delay 322

ip pim-bidir lan-prune-delay 323

ip pim-bidir override-interval 324

ip pim-bidir propagation-delay 325

no ip pim-bidir 326

show ip pim dfe 327

show running-config pim 328

Boot commands 330

boot set-default 330

boot system 330

show boot-history 332

Breakout cable support commands 335

split 335

CDP commands 337

cdp 337

clear cdp counters 338

clear cdp neighbor-info 338

show cdp 339

show cdp neighbor-info 340

show cdp traffic 341

Checkpoint commands 342

checkpoint auto 342

checkpoint auto confirm 343

checkpoint diff 344

checkpoint post-configuration 345

checkpoint post-configuration timeout 346

checkpoint rename 347

checkpoint rollback 348

copy checkpoint <CHECKPOINT-NAME> <REMOTE-URL> 349

copy checkpoint <CHECKPOINT-NAME> {running-config | startup-config} 350

copy checkpoint <CHECKPOINT-NAME> <STORAGE-URL> 351

copy <REMOTE-URL> checkpoint <CHECKPOINT-NAME> 352

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 7

Contents |8

copy <REMOTE-URL> {running-config | startup-config} 353

copy running-config {startup-config | checkpoint <CHECKPOINT-NAME>} 355

copy {running-config | startup-config} <REMOTE-URL> 356

copy {running-config | startup-config} <STORAGE-URL> 357

copy startup-config running-config 358

copy <STORAGE-URL> running-config 359

erase 361

show checkpoint <CHECKPOINT-NAME> 362

show checkpoint <CHECKPOINT-NAME> hash 364

show checkpoint post-configuration 365

show checkpoint 366

show checkpoint date 367

show running-config hash 367

show startup-config hash 368

write memory 369

Classifier policy commands 371

Classifier policy application 371

apply policy (config-if, config-lag-if, config-if-vlan, config-vlan) 371

apply policy 375

class copy 376

class ip 378

class ipv6 385

class mac 391

class resequence 395

class reset 397

clear policy hitcounts 397

policy 399

policy copy 404

policy resequence 405

policy reset 406

show class 406

show policy 408

CLI session commands 414

alias 414

auto-confirm 415

configure terminal 416

disable 417

do 417

enable (manager context) 418

end 419

exit 419

list 420

page 420

Pipe (|) command 421

repeat 422

session-timeout 423

show session-timeout 424

show alias 424

show history 425

CLI user session management commands 427

cli-session 427

Clock commands 430

clock date 430

clock datetime 430

clock time 431

clock timezone 432

show clock 432

Container management commands 434

container 434

container exec 434

env 435

image-location 436

restrict cpu 437

restrict memory 438

show container 438

show capacities containers 440

show capacities-status containers 440

show running-config container 441

vrf 442

CoPP commands 443

Classes of traffic 443

apply copp-policy 444

class 445

clear copp-policy statistics 447

copp-policy 448

default-class 449

reset copp-policy 450

show copp-policy 451

show copp-policy factory-default 453

show copp-policy statistics 455

show tech copp 456

Debug logging commands 458

clear debug buffer 458

debug {all | <MODULE-NAME>} 459

debug db 460

debug destination 462

show debug 464

show debug buffer 465

show debug destination 466

DHCP client commands 468

ip dhcp 468

show ip dhcp 469

DHCPv4 relay commands 470

dhcp-relay 470

dhcp-relay hop-count-increment 470

dhcp-relay l2vpn-clients 471

dhcp-relay option 82 472

dhcp-smart-relay 473

diag-dump dhcp-relay basic 474

ip bootp-gateway 476

ip helper-address 476

show dhcp-relay 478

show dhcp-relay bootp-gateway 479

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 9

Contents |10

show ip helper-address 480

DHCP relay (IPv6) commands 482

dhcpv6-relay 482

dhcpv6-relay option 79 483

ipv6 helper-address 483

show dhcpv6-relay 485

show ipv6 helper-address 485

DHCP server IPv4 commands 487

authoritative 487

bootp 487

clear dhcp-server leases 489

default-router 490

dhcp-server external-storage 491

dhcp-server vrf 492

disable 493

dns-server 493

domain-name 494

enable 495

lease 496

netbios-name-server 497

netbios-node-type 498

option 498

pool 499

range 500

show dhcp-server 502

static-bind 504

DHCP server IPv6 commands 506

authoritative 506

clear dhcpv6-server leases 507

dhcpv6-server external-storage 508

dhcpv6-server vrf 509

disable 510

dns-server 510

enable 511

lease 512

option 513

pool 514

range 515

show dhcpv6-server 516

static-bind 518

DHCP options commands 520

http-proxy 520

DNS client commands 522

ip dns domain-list 522

ip dns domain-name 523

ip dns host 524

ip dns server address 525

show ip dns 526

ECMP commands 529

show ip ecmp 529

ERPS Commands 531

clear erps ring <RINGID> instance <ID> 531

clear erps statistics 531

erps ring 532

erps ring <RINGID> <port0|port1> interface 533

erps ring <RINGID> description 534

erps ring <RINGID> guard-interval 535

erps ring <RINGID> hold-off-interval 536

erps ring <RINGID> instance 537

erps ring <RINGID> instance <ID> control-vlan 538

erps ring <RINGID> instance <ID> description 539

erps ring <RINGID> instance <ID> enable 540

erps ring <RINGID> instance <ID> protected-vlans 541

erps ring <RINGID> instance <ID> protection-switch {{manual|force} <PORT0>|<PORT1>} 542

erps ring <RINGID> instance <ID> revertive 544

erps ring <RINGID> instance <ID> role 545

erps ring <RINGID> instance <ID> rpl 546

erps ring <RINGID> meg-level 547

erps ring <RINGID> parent-ring 548

erps ring <RINGID> sub-ring 549

erps ring <RINGID> tcn-propogation 550

erps ring <RINGID> transmission-interval 551

erps ring <RINGID> wtr-interval 552

show erps statistics 553

show erps status 554

show erps summary 557

EVPN commands 558

active-gateway 558

arp-suppression 560

dyn-vxlan-tunnel-bridging-mode 561

disable (evpn vlan-aware-bundles) 562

enable(evpn vlan-aware-bundles) 563

evpn 563

mac-move-detection count timer 564

nd-suppression 565

rd 566

rd (evpn vlan-aware-bundles) 567

redistribute host-route 568

redistribute host-route (evpn vlan-aware-bundles) 569

redistribute local-mac 570

redistribute local-svi 570

route-target 571

route-target {evpn} 572

route-target (evpn vlan-aware-bundles) 573

show evpn evi 575

show evpn evi summary 576

show evpn evi <EVI-ID> 577

show evpn evi detail 578

show evpn evi <EVI-ID> detail 580

show evpn mac-ip 580

show evpn mac-ip evi 581

show evpn vtep-neighbor 582

show running-config evpn 583

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 11

Contents |12

virtual-mac 584

vlan 585

vlan-aware-bundle 586

vlan-ethernet-tag (evpn vlan-aware-bundles) 586

vlan <ID-RANGE> 587

External storage commands 589

address 589

directory 590

disable 591

enable 591

external-storage 592

password (external-storage) 593

show external-storage 594

show running-config external-storage 595

type 595

username 596

vrf 597

Feature pack commands 599

erase feature-pack 599

feature-pack mode 599

feature-pack server 601

feature-pack validate 602

show feature-pack 602

Fault monitor commands 608

(Fault enabling/disabling) 608

action 609

apply fault-monitor profile 612

fault-monitor profile 613

show fault-monitor profile 614

show interface fault-monitor profile 615

show interface fault-monitor status 616

show running-config 617

threshold 619

vsx-sync (fault monitor) 621

Firmware management commands 623

copy {primary | secondary} <REMOTE-URL> 623

copy {primary | secondary} <FIRMWARE-FILENAME> 624

copy primary secondary 625

copy <REMOTE-URL> 625

copy secondary primary 627

copy <STORAGE-URL> 628

copy hot-patch 629

hot-patch 630

show hot-patch 632

High Availability Commands 634

redundancy switchover 634

HSC commands 636

bfd enable 636

bfd disable 636

disable 637

enable 638

hsc 638

manager ip 639

manager port 640

HTTPS server commands 642

https-server authentication certificate 642

https-server authentication password 643

https-server max-user-sessions 643

https-server rest access-mode 644

https-server rest firmware-site-distribution 645

https-server session close all 646

https-server session-timeout 647

https-server vrf 648

show https-server 649

show https-server authentication 650

ICMP commands 652

ip icmp redirect 652

ip icmp throttle 652

ip icmp unreachable 653

IGMP commands 655

ip igmp 655

ip igmp apply access-list 656

ip igmp last-member-query-interval 657

ip igmp querier 658

ip igmp querier interval 659

ip igmp querier-wait-time 660

ip igmp querier query-max-response-time 661

ip igmp robustness 662

ip igmp router-alert-check 663

ip igmp static-group 664

ip igmp version 665

ip igmp version strict 666

no ip igmp 667

show ip igmp 667

show ip igmp counters 670

show ip igmp group 672

show ip igmp groups 674

show ip igmp interface 677

show ip igmp interface counters 678

show ip igmp interface group 679

show ip igmp interface groups 681

show ip igmp interface statistics 682

show ip igmp static-groups 683

show ip igmp statistics 684

IGMP snooping commands 687

ip igmp snooping apply access list 687

ip igmp snooping (config mode) 688

ip igmp snooping (interface mode) 689

ip igmp snooping static group 691

ip igmp snooping (vlan mode) 692

show ip igmp snooping 694

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 13

Contents |14

In-System Programming commands 698

clear update-log 698

show needed-updates 698

Interface commands 700

allow-unsupported-transceiver 700

default interface 702

description 703

error-control 703

flow-control 704

flow-control buffer headroom 709

flow-control buffer xon 710

flow-control buffer xoff dynamic 711

flow-control buffer xoff static 712

flow-control watchdog 714

flow-control watchdog timeout resume 715

interface 716

interface loopback 717

interface vlan 717

ip address 718

ip mtu 720

ipv6 address 721

l3-counters 722

mtu 723

persona 724

rate-interval 726

routing 727

show allow-unsupported-transceiver 728

show interface 729

show interface dom 734

show interface flow-control 735

show interface statistics 740

show interface transceiver 743

show interface utilization 747

show ip interface 748

show ip source-interface 749

show ipv6 interface 750

show ipv6 source-interface 752

shutdown 753

system interface-group 754

IP Directed Broadcast commands 756

copy support-file feature 756

ip directed-broadcast 756

show arp 757

show ip interface 758

show ip directed-broadcast 759

IP Neighbor Flood commands 761

ip neighbor-flood 761

show ip interface 761

show ip neighbor-flood 762

show running-config 763

IP-SLA commands 765

http 765

https 766

icmp-echo 767

ip-sla 768

ip-sla responder 769

show ip-sla responder 770

show ip-sla responder results 771

show ip-sla 772

start-test 776

stop-test 777

tcp-connect 777

udp-echo 778

udp-jitter-voip 780

vrf 781

IP tunnels commands 783

description 783

destination ip 784

destination ipv6 785

interface tunnel 786

ip address 788

ipv6 address 789

ip mtu 790

show interface tunnel 791

show running-config interface tunnel 793

shutdown 794

source ip 795

source ipv6 796

ttl 797

vrf attach 798

IPv6 RA commands 801

ipv6 address <global-unicast-address> 801

ipv6 address autoconfig 802

ipv6 address link-local 803

ipv6 nd cache-limit 803

ipv6 nd dad attempts 804

ipv6 nd hop-limit 805

ipv6 nd mtu 806

ipv6 nd ns-interval 806

ipv6 nd prefix 807

ipv6 nd ra dns search-list 809

ipv6 nd ra dns server 810

ipv6 nd ra lifetime 811

ipv6 nd ra managed-config-flag 812

ipv6 nd ra max-interval 813

ipv6 nd ra min-interval 814

ipv6 nd ra other-config-flag 814

ipv6 nd ra reachable-time 815

ipv6 nd ra retrans-timer 816

ipv6 nd route 817

ipv6 nd router-preference 818

ipv6 nd suppress-ra 819

show ipv6 nd global traffic 819

show ipv6 nd interface 820

show ipv6 nd interface prefix 823

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 15

Contents |16

show ipv6 nd interface route 824

show ipv6 nd ra dns search-list 825

show ipv6 nd ra dns server 826

IRDP commands 828

diag-dump irdp basic 828

ip irdp 829

ip irdp holdtime 830

ip irdp maxadvertinterval 831

ip irdp minadvertinterval 832

ip irdp preference 832

show ip irdp 833

IVRF commands 835

address-family 835

ip|ipv6 vrf 836

ipv6 route source interface 836

ip route interface 839

rd 841

redistribute 842

route-target 844

route-target export 845

router bgp 847

router bgp vrf 848

show bgp vpn unicast 849

show bgp info vrf 853

show ip route vrf 854

show ipv6 route vrf 855

vrf 856

Job Scheduler commands 857

job 857

schedule 859

show job 862

show capacities (job, schedule) 865

show running-config (job, schedule) 865

show schedule 867

Key chain commands 870

accept-lifetime 870

cryptographic-algorithm 871

key 872

keychain 873

key-string 874

name 875

recv-id 876

send-lifetime 877

send-id 878

show capacities keychain 879

show keychain 880

show running-config keychain 882

show interface 883

LACP and LAG commands 889

description 889

interface lag 890

ip address 891

ipv6 address 892

lacp fallback 893

lacp fallback-static 894

lacp mode 895

lacp port-id 896

lacp port-priority 896

lacp rate 897

lacp system-priority 898

lag 899

show interface 900

show lacp aggregates 902

show lacp configuration 903

show lacp interfaces 904

show lag 907

show running-config interface lag 909

shutdown 910

vlan trunk native 910

LLDP commands 913

clear lldp neighbors 913

clear lldp statistics 913

lldp 914

lldp dot3 915

lldp dot3 mfs 916

lldp management-address vlan 916

lldp management-ipv4-address 917

lldp management-ipv6-address 918

lldp med 919

lldp med location 920

lldp receive 923

lldp reinit 924

lldp select-tlv 924

lldp timer 926

lldp transmit 927

lldp txdelay 928

lldp trap enable 929

show lldp configuration 931

show lldp configuration mgmt 933

show lldp local-device 934

show lldp neighbor-info 936

show lldp neighbor-info detail 939

show lldp neighbor-info mgmt 941

show lldp statistics 943

show lldp statistics mgmt 944

show lldp tlv 945

Local AAA commands 947

aaa accounting all-mgmt 947

aaa authentication console-login-attempts 949

aaa authentication limit-login-attempts 950

aaa authentication login 951

aaa authentication minimum-password-length 952

aaa authorization commands (local) 953

show aaa accounting 955

show aaa authentication 956

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 17

Contents |18

show aaa authorization 957

show authentication locked-out-users 958

show ssh authentication-method 959

show user 960

ssh password-authentication 961

ssh public-key-authentication 962

user authorized-key 963

Log rotation commands 965

logging threshold 965

logrotate maxsize 967

logrotate period 967

logrotate target 968

show logrotate 970

Loop protect commands 971

loop-protect 971

loop-protect action 972

loop-protect re-enable-timer 973

loop-protect transmit-interval 974

loop-protect trap loop-detected 974

loop-protect vlan 975

show loop-protect 976

Loopback commands 980

interface loopback 980

ip address 980

ipv6 address 981

vrf attach 982

show interface loopback 983

MAC address table commands 985

clear mac-address 985

clear mac address mac move 987

clear mac-address-table 988

mac-address-table age-time 988

show mac-address-table 989

show mac-address-table address 991

show mac-address-table count 992

show mac-address-table dynamic 993

show mac-address-table interface 994

show mac-address-table lockout 995

show mac address table mac move 996

show mac-address-table mac-move 997

show mac-address-table port 999

show mac-address-table static 1000

show mac-address-table vlan 1000

show mac address table mac move 1001

static-mac 1002

Management interface commands 1004

default-gateway 1004

ip static 1005

nameserver 1006

show interface mgmt 1007

mDNS gateway commands 1008

debug mdns 1008

description 1009

id 1009

mdns-sd 1010

mdns-sd apply-profile tx 1011

mdns-sd enable 1012

mdns-sd profile 1013

mdns-sd service 1013

clear mdns-sd statistics 1014

sequence-number 1015

show mdns-sd service-entries 1016

show mdns-sd statistics 1018

show mdns-sd statistics profile 1018

show mdns-sd summary 1019

show running-config interface 1020

show running-config mdns-sd profile 1021

show running-config mdns-sd service 1022

Mirroring commands 1023

clear mirror 1023

comment 1023

copy tcpdump-pcap 1024

copy tshark-pcap 1025

destination cpu 1026

destination interface 1027

destination tunnel 1028

diagnostic 1030

diag utilities tcpdump 1031

disable 1033

enable 1034

mirror session 1035

show mirror 1036

source interface 1037

MLD snooping global configuration commands 1040

ipv6 mld snooping 1040

MLD snooping VLAN configuration commands 1041

ipv6 mld snooping 1041

ipv6 mld snooping fastlearn 1042

ipv6 mld snooping fastleave vlan 1042

ipv6 mld snooping forced fastleave vlan 1043

ipv6 mld snooping apply access-list 1044

ipv6 mld snooping auto vlan 1046

ipv6 mld snooping blocked vlan 1046

ipv6 mld snooping forward vlan 1047

ipv6 mld snooping static-group 1048

ipv6 mld snooping version 1049

MLD snooping show commands 1051

show ipv6 mld snooping 1051

show mgmd debug-counters 1054

MLD configuration commands for interface VLAN 1056

AOS-CX 10.13 Command-Line Interface Guide | (9300 Switch Series) 19

Contents |20

ipv6 mld 1056

ipv6 mld apply access-list 1056

no ipv6 mld 1058

ipv6 mld querier 1058

ipv6 mld querier interval 1059

ipv6 mld querier-wait-time 1060

ipv6 mld last-member-query-interval 1060

ipv6 mld querier query-max-response-time 1061

ipv6 mld robustness 1062

ipv6 mld static-group 1063

ipv6 mld version 1063

ipv6 mld version strict 1064

MLD show commands for interface VLAN 1066

show ipv6 mld 1066

MLD configuration commands for interface 1070

ipv6 mld 1070

ipv6 mld apply access-list 1070

no ipv6 mld 1072

ipv6 mld querier 1072

ipv6 mld querier interval 1073

ipv6 mld last-member-query-interval 1074

ipv6 mld querier query-max-response-time 1074

ipv6 mld robustness 1075

ipv6 mld static-group 1076

ipv6 mld version 1077

ipv6 mld version strict 1077

MSDP router config commands 1079

disable 1079

enable 1079

router msdp 1080

sa-interval 1081

sa-limit 1082

MSDP peer configuration commands 1084

connection-retry-interval 1084

connect-source 1084

clear ip msdp peer statistics 1085

description 1086

disable 1087

enable (ip msdp peer) 1088

ip msdp peer 1088

keepalive 1089

mesh-group 1090

password (router msdp) 1091

sa-filter access-list 1092

MSDP show commands 1094

show ip msdp count 1094

show ip msdp peer 1095

show ip msdp sa-cache 1096

show ip msdp summary 1097

Page is loading ...

Aruba 9300-32D Reference guide

Aruba 9300-32D Reference guide

Related papers

Other documents