Noble House 17778 Operating instructions

Brand
Noble House
Model
17778
Type
Operating instructions
1 OF 4
No. Picture Description Qty
A
Backrest Panel 1
B
Chair Seat Panel 1
C
Right Legs with Pre-attached
Levellers
1
D
Left Legs with Pre-attached
Levellers
1
Assembly Instructions
Caution : You must read this before you proceed.
PHENIX CHAIR
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
2 OF 4
No. Picture Description Qty
Washer (8mm) 8
Springs Washer (8mm) 8
Nut (8mm) 8
k
Rubber Cap 4
J
Spanner 1
H
Place all parts on a clean, soft surface.
Before Beginning Assembly:
3 OF 4
Step 5
Stand the chair rightside up.
Now, fully and securely, tighten all nuts, at all joints.Add Rubber Caps(K) on all bolt
ends to protect skin or clothing from getting snagged.
Adjust the Pre-attached levellers at the bottoms of the chair legs until the chair is level with
the ground.
Your chair is ready for use.
Attach the Chair Seat Panel(B) with Right Leg(C) using Washers, Spring Washers
and Nuts(H) with Spanner(J)
DO NOT overtighten.
Step 3
Then attach the Backrest Panel(A) to the top end of the Right Leg(C) using Washers,
Spring Washers and Nuts(H) with Spanner(J)
DO NOT overtighten.
Step 4
Connect the Left Leg(D) with the Chair Seat Panel(B) & Backrest Panel(A) using Washers,
Spring Washers and Nuts(H) with Spanner(J)
Step 4 follows the same process as Step 3 above.
DO NOT overtighten.
Backrest Panel
This is the
preattached Seat
Panel to RIGHT LEG.
4 OF 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Noble House 17778 Operating instructions

Brand
Noble House
Model
17778
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents