Regency HDMPLFSC3665AG Operating instructions

Regency
Brand
Regency
Model
HDMPLFSC3665AG
Type
Operating instructions
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
STEP 2 :Place 4 cam pins(G) and 2 cam
locks(F) into each side(P).
LEGACY STORAGE CABINET • LSC3535 • INSTRUCTIONS
Organize your parts and hardware. You will need a Phillips head and at head screw driver and rubber mallet.
Hardware :
A: Mounting Bracket(4) • B: Hinge(4) • C: Lock Lip • D: Door Tooth(2) E: Small Screw(2) F: Cam Locks(13)
G: Cam Pins(13) • H: Medium Screws(16) • I: Shelf Pins(8) • J: Feet(4) K: Large Screws(4) •
L: Door Handles(2) • M: Keys(2)
A
B
C
E
F
G
H
Parts :
N: Back • O: Bottom • P: Sides(2)• Q: Shelf R: Top• S: Door(2)
S
R
Q
P
O
N
STEP 1 : Place 5 cam locks(F) in back(N)
I
J
K
L
M
N
F
F
F
F
F
F
F F
G
G
G
G
P
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 4 : Place 4 cam locks(F) into bottom
(O) and connect by inserting cam locks into
pins and tightening. (for best results arrage
bottom so cam locks are facing out)
STEP 3 : Lay back(N) on ground with cam
locks facing up. Connect one side(P) to back by
inserting cam pins into locks and tightening.
LEGACY STORAGE CABINET • LSC3535 • INSTRUCTIONS
STEP 5A : Connect second side(P) by inserting
and tightening cam pins and locks.
STEP 5B : Screw in feet(J) to bottom of both
sides(P).
NOTE: If you are stacking the storage cabinet,
the feet are optional.
STEP 6 : Screw mouting brackets(A) into
pre existing holes in sides(P) using 2 medium
screws(H) each.
STEP 7 : Place shelf pins(I) in place and insert
shelfs(Q).
STEP 8 : Place 5 cam pins(G) into top(R).
Also use 2 small screws(E) to secure lock
lip(C) in the pre drilled holes.
N
P
O
F F
F F
O
P
P
J
J
J
J
A
R
G
G
G
G
G
C
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
LEGACY STORAGE CABINET • LSC3535 • INSTRUCTIONS
STEP 9 : Place top(R) onto unit by inserting
cam pins into locks and tightening.
STEP 10 : Attach handles(L) to doors(S) by
inserting 2 large screws(K) through exisitng
holes in the door and tightening the handles to
the doors.
K
STEP 11 : Attach Hinges(B) to doors(S) with
2 medium screws(H) each.
B
B
STEP 10 : Connect Doors(S) to mounting
brackets(A) on the side walls(P).
STEP 10A : Screw(10A) from bracket(A)
interlocks with hinge(B) opening just as
screw(10B) on hinge(B) interlocks with mount(A)
opening.
Note..The screw 10B is an adjustment for the door
position. Turn right to adjust door to center and
left to adjust toward the side.
10A
10B
A
B
  • Page 1 1
  • Page 2 2
  • Page 3 3

Regency HDMPLFSC3665AG Operating instructions

Regency
Brand
Regency
Model
HDMPLFSC3665AG
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents