2. Regency
  3. TB4848MHBPBK
TB4848MHBPBK

Regency TB4848MHBPBK, HDRM3030CHBPBK, TB4848BEBPBK, TB4848MWBPCM, TB4848PLBPBK Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Regency TB4848MHBPBK Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
• Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples & packing straps before you start to assemble.
• Keep all hardware parts and packaging out of reach of children.
MTBP27
·
Kee Post Table Legs INSTRUCTIONS
You will need 2 people for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
Hardware :
A: Screws(24)
Parts :
B: Legs(4)
A
C
B
STEP 1 (Square Table Top): Place Table Top(C) on a clean at surface with desired table nish face down. Position
assembled legs as shown in Figure A.
Then, attach assembled Legs to Table Top using 6 Screws(A) per Leg.
C
Figure A
C: Table Top (may vary)
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
STEP 1 (Round Table Top): Place Table Top(C) on a clean at surface with
desired table nish face down. Using a tape measure, position assembled legs
at an equal distance from one another as shown in Figure B. Then, attach the
assembled Legs to Table Top using 6 Screws(A) per Leg.
C
Figure B
MTBP27
·
Kee Post Table Legs INSTRUCTIONS
You will need 2 person(s) for this assembly.
You will need a Phillips Head Screw Driver and a Tape Measure to Assemble.
EQUAL
EQUAL
EQUAL
EQUAL
STEP 1 (Rectangle Table Top): Place Table Top(C) on a clean at surface with desired table nish face
down. Position assembled legs as shown in Figure C. Then, attach assembled Legs to Table Top using 6
Screws(A) per Leg.
C
Figure C
STEP 2: Using 2 people, ip the table over and adjust leveling glides accordingly.
/