Grizzly T25091 Owner's manual

Grizzly
Brand
Grizzly
Model
T25091
Type
Owner's manual

Grizzly T25091 Workbench is a highly sturdy workbench with an 84 x 26-inch table top, a thickness of 11.5-inches, and a weight capacity of 250 lbs. The workbench has two levels of drawers. The upper drawers measure 25 x 6.5 x 14.5-inches, while the lower drawers measure 25 x 93.75 x 14.5-inches. The workbench is built with a lacquer-sealed finish and comes with adjustable foot pads to ensure stability even on uneven surfaces. It is an ideal workbench for professional workshops, garages, or home improvement projects. The product comes with a 1-year warranty and lifetime technical support.

Grizzly T25091 Workbench is a highly sturdy workbench with an 84 x 26-inch table top, a thickness of 11.5-inches, and a weight capacity of 250 lbs. The workbench has two levels of drawers. The upper drawers measure 25 x 6.5 x 14.5-inches, while the lower drawers measure 25 x 93.75 x 14.5-inches. The workbench is built with a lacquer-sealed finish and comes with adjustable foot pads to ensure stability even on uneven surfaces. It is an ideal workbench for professional workshops, garages, or home improvement projects. The product comes with a 1-year warranty and lifetime technical support.

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T25091
84" x 26" HEAVY-DUTY
WORKBENCH
INSTRUCTIONS
Table Dimensions ............................... 84 x 26 in.
Table Thickness .........................................1
1
⁄2 in.
Finish ..........................................Lacquer Sealed
Upper Drawers ........................25 x 6
1
⁄2 x 14
1
⁄2 in.
Lower Drawers ........................25 x 9
3
⁄4 x 14
1
⁄2 in.
Weight .....................................................250 lbs.
SpecificationsIntroduction
Thank you for purchasing the Grizzly T25091
Heavy-Duty Workbench. The part numbers refer-
enced throughout the assembly steps correspond
with the fasteners shown in the inventory photo
below, and the parts breakdown shown on Page 7.
COPYRIGHT © JANUARY, 2013 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#ST15576 PRINTED IN TAIWAN
WOOD SCREW (#7)
TWIST-LOCK
NUT (#8)
TWIST-LOCK
DOWEL SCREW (#9)
FLAT WASHER
6MM (#24)
LOCK WASHER
6MM (#25)
HEX WRENCH
(#30)
FURNITURE SCREW
M6-1 X 45 (#28)
DOWEL
(#10)
FURNITURE SCREW
M6-1 X 75 (#27)
FURNITURE SCREW
M6-1 X 90 (#29)
DOWEL NUT
M6-1 (#11)
-2-
T25091 Heavy-Duty Workbench (Mfg. 1/13+)
2. Insert four dowels (#10) into the shelf (#13). Attach the shelf (#13) to the left support panel (#15), then
secure with two dowel nuts (#11), two flat washers (#24), two lock washers (#25), and two furniture cap
screws (#29).
1. Insert four dowels (#10) into the rear support panel (#12). Attach the left support panel (#15) to the rear
panel (#12) using the dowels for alignment and securing with two dowel nuts (#11), two flat washers (#24),
two lock washers (#25), and two furniture cap screws (#29).
Assembly
10
13
11
10
11
15
24
24
25
25
29
29
10
12
11
10
15
24
24
25
25
29
29
T25091 Heavy-Duty Workbench (Mfg. 1/13+)
-3-
3. Insert two dowels (#10) into the top of the partition panel (#14). Attach the partition panel (#14) to the
shelf (#13) with two dowel nuts (#11), two flat washers (#24), two lock washers (#25), and two furniture cap
screws (#28).
4. Insert one dowel (#10) into each end of the front support panel (#17) and rear support panel (#18). Insert
one dowel into the top of the rear support panel (#18). Attach the front (#17) and rear (#18) support panels
to the left support panel (#15) and partition panel (#14), then secure with three dowel nuts (#11), three flat
washers (#24), three lock washers (#25), and three furniture cap screws (two of #28 and one of #29).
11
25
28
24
13
10
14
15
24
28
29
25
25
24
14
11
10
10
10
10
11
18
10
28
17
11
24
25
-4-
T25091 Heavy-Duty Workbench (Mfg. 1/13+)
6. Secure the workbench top (#1) to the left support panel (#15) and right support panel (#16) using six flat
washers (#24), six lock washers (#25), and six furniture cap screws (four of #27 and two of #28). Secure the
adjustable foot pad (#31) to the bottom of the rear support panel (#18). Adjust as necessary to ensure that
foot touches the ground for support.
1
27
28
27
25
24
16
18
31
15
27
28
24
25
27
5. Secure the right support panel (#16) to the assembly with six dowel nuts (#11), six flat washers (#24), six
lock washers (#25), and six furniture cap screws (one of #28 and five of #29).
13
10
16
29
28
29
25
24
10
11
17
18
T25091 Heavy-Duty Workbench (Mfg. 1/13+)
-5-
7. Insert the large drawer bottom panel (#21) into both the large drawer front panel (#20) and the large
drawer rear panel (#22). Secure the large drawer rear panel (#22) to the large drawer bottom panel (#21)
using four wood screws (#7).
22
7
21
20
8. Insert two dowels (#10) into each side of the rear drawer panel (#22). Attach the large drawer panels (#19
and #23) to the large drawer assembly using three wood screws (#7) on each side in the back, and three
twist-lock nuts (#8) and three twist-lock dowel screws (#9) on each side in the front.
9. Repeat Steps 7–8 to assemble the remaining large drawer.
8
19
7
10
22
9
10
7
23
8
-6-
T25091 Heavy-Duty Workbench (Mfg. 1/13+)
10. To assemble the small drawers, repeat Steps 7–8, but only use two wood screws (#7) on each side in
the back and two twist-lock nuts (#8) and two twist-lock dowel screws (#9) on each side in the front.
4
3
8
2
7
5
7 6
8
11. Fit each drawer between two slides on the drawer mounting block and push them all the way in.
T25091 Heavy-Duty Workbench (Mfg. 1/13+)
-7-
1
4
4
5
5
10
7
7
7
7
2
8
6
8
9
10
7
2
8
3
3
9
6
11
11
10
12
28
28
13
10
27
28
27
29
28
29
25
24
15
10
31
18
10
10
14
17
28
24
25
7
23
8
9
20
22
10
7
7
19
23
8
9
20
8
19
7
7
10
22
30
27
28
27
25
24
16
21
21
T25091 Parts Breakdown and List
REF PART # DESCRIPTION QTY REF PART # DESCRIPTION QTY
1 PT25091001 WORKBENCH TOP 1 16 PT25091016 RIGHT SUPPORT PANEL 1
2 PT25091002 SMALL DRAWER RIGHT PANEL 2 17 PT25091017 FRONT SUPPORT PANEL 1
3 PT25091003 SMALL DRAWER FRONT PANEL 2 18 PT25091018 REAR SUPPORT PANEL 1
4 PT25091004 SMALL DRAWER BOTTOM PANEL 2 19 PT25091019 LARGE DRAWER RIGHT PANEL 2
5 PT25091005 SMALL DRAWER REAR PANEL 2 20 PT25091020 LARGE DRAWER FRONT PANEL 2
6 PT25091006 SMALL DRAWER LEFT PANEL 2 21 PT25091021 LARGE DRAWER BOTTOM PANEL 2
7 PT25091007 WOOD SCREW M4 X 30 36 22 PT25091022 LARGE DRAWER REAR PANEL 2
8 PT25091008 TWIST-LOCK NUT 20 23 PT25091023 LARGE DRAWER LEFT PANEL 2
9 PT25091009 TWIST-LOCK DOWEL SCREW 20 24 PW03M FLAT WASHER 6MM 21
10 PT25091010 WOOD DOWEL M8 X 30 34 25 PLW03M LOCK WASHER 6MM 21
11 PT25091011 DOWEL NUT M6-1 15 27 PT25091027 FURNITURE CAP SCREW M6-1 X 75 4
12 PT25091012 REAR PANEL 1 28 PT25091028 FURNITURE CAP SCREW M6-1 X 45 7
13 PT25091013 SHELF 1 29 PT25091029 FURNITURE CAP SCREW M6-1 X 90 10
14 PT25091014 PARTITION PANEL 1 30 PAW04M HEX WRENCH 4MM 1
15 PT25091015 LEFT SUPPORT PANEL 1 31 PT25091031 ADJUSTABLE FOOT PAD 1
Buy Direct and Save with Grizzly
®
– Trusted, Proven and a Great Value!
~Since 1983~
ORDER
24 HOURS A DAY!
1-800-523-4777
Visit Our Website Today For
Current Specials!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Grizzly T25091 Owner's manual

Grizzly
Brand
Grizzly
Model
T25091
Type
Owner's manual

Grizzly T25091 Workbench is a highly sturdy workbench with an 84 x 26-inch table top, a thickness of 11.5-inches, and a weight capacity of 250 lbs. The workbench has two levels of drawers. The upper drawers measure 25 x 6.5 x 14.5-inches, while the lower drawers measure 25 x 93.75 x 14.5-inches. The workbench is built with a lacquer-sealed finish and comes with adjustable foot pads to ensure stability even on uneven surfaces. It is an ideal workbench for professional workshops, garages, or home improvement projects. The product comes with a 1-year warranty and lifetime technical support.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents