Delta Children Summit 4 Drawer Chest Assembly Instructions

Type
Assembly Instructions

Delta Children Summit 4 Drawer Chest

The Delta Children Summit 4 Drawer Chest is a sturdy and stylish storage solution for your child's room. It comes with four drawers that are perfect for storing clothes, toys, and other belongings. The drawers are made of durable plastic and have smooth-gliding metal runners for easy opening and closing. The chest is also easy to assemble and comes with all the necessary hardware.

Here are some of the benefits of the Delta Children Summit 4 Drawer Chest:

  • Durable construction: The chest is made of sturdy MDF and has a durable laminate finish that is resistant to scratches and stains.

Delta Children Summit 4 Drawer Chest

The Delta Children Summit 4 Drawer Chest is a sturdy and stylish storage solution for your child's room. It comes with four drawers that are perfect for storing clothes, toys, and other belongings. The drawers are made of durable plastic and have smooth-gliding metal runners for easy opening and closing. The chest is also easy to assemble and comes with all the necessary hardware.

Here are some of the benefits of the Delta Children Summit 4 Drawer Chest:

  • Durable construction: The chest is made of sturdy MDF and has a durable laminate finish that is resistant to scratches and stains.
Style #:
Lot:
Date:
___________
___________
___________
April 16, 2014 74324-R0 ©2014 DELTA ENTERPRISE CORP.
4 Drawer Case
Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
REV
THIS PRODUCT IS NOT INTENDED FOR
INSTITUTIONAL OR COMMERCIAL USE.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
When contacting Delta Consumer Care please reference the above information. Before contacting Delta
Consumer Care please ensure that the information above matches the information found on the label on
the Back Panel, please reference the information found on the product when contacting Delta Consumer
Care.
To register your product for important safety alerts and updates to your product please visit
www.DeltaChildren.com and click on Product Registration.
A
2
Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:
.
Place heaviest items in the lowest drawers.
.
Unless specifically designed to accommodate, do not set TV’s or other heavy objects on the top of this
product.
.
Never allow children to climb or hang on drawers, doors,or shelves.
.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
.
Always monitor your child’s activity when in the nursery.
.
Do not allow standing in drawers.
.
Do not allow standing on top of this product.
.
Accessory Items must be securely fastened to this product according to the instructions provided with
those items.
.
To avoid head injury, do not allow children to play underneath open drawers.
.
Do not leave drawers open when not in use.
WARNING
NOTES ON ASSEMBLY:
-During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the
diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in
the instructions.
-To assemble this unit you may be required to place the unit on it’s side and face. It is strongly recommended that
assembly is done on a soft, non-abrasive surface to avoid damaging the finish.
NOTES ON CARE AND MAINTENANCE:
- Do not scratch or chip the finish.
- Inspect the product periodically, contact delta children's products for replacement parts or questions.
- Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp,
cold basement. These extremes can cause a loss of structural integrity.
-To preserve the luster of the high quality finish on your product, it is recommended to place a doily or felt pad
under any items you place on the finish.
-Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
-Do not use abrasive chemicals.
-Do not spray cleaners directly onto furniture.
-Lift slightly when moving on carpeting to prevent leg breakage.
-Use of a vaporizer near furniture will cause wood to swell and finish to peel.
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT.
A. Left Side x1
Part #24964
B. Right Side x1
Part #24965
C. Top Front Rail x1
Part #24966
D. Top Back Rail x1
Part #24967
E. Middle Front Rail x1
Part #24968
R. Bottom Front Rail x1
Part #24969
S. Bottom Back Rail x1
Part #24970
F. Drawer Rail x2
Part #24971
G. Top x1
Part #24972
H. Back Panel x2
Part #24973
J. Back Panel Divider x1
Part #24974
K. Drawer Front x4
Part #24975
L. Drawer Side x8
Part #24977
M. Drawer Back x4
Part #24978
N. Drawer Bottom x4
Part #24979
P. Drawer Bottom Support x4
Part #25000
3
Phillips
Screwdriver x1
(Not included)
Hardware kit part #24981 for color #208
JJ. 8mm Dowel x30
HH. 6mm Dowel x8
FF. PHWS 3 x 15mm Truss Head x36
AA. 30mm Bolt x4
BB. 50mm Bolt x8
CC. 60mm Bolt x12
DD. Plastic Crescent Washer x12
EE. PHWS 3 x 25mm x20
LL. Plastic Barrel Nut x20
GG. PHWS 3 x 40mm x20
M4 Wrench
(Supplied)
M4 Ball End Hex Screwdriver
(Included)
PARTS:
KK. 12mm Screw x 24
PP1. Wood knob base x8
PP2. KNOB SCREW 30mm x8
4
P. Knob and Screw
2. Align the bolt with the hole in the end of the rail, align the
dowels in the end of the rail with the with the holes in the
post. Slide together until tight.
3. Slide the Plastic Crescent Washer over the exposed bolt,
behind the head of the bolt. Tighten the bolt with the M5
Allen Wrench provided.
Ensure all bolts are tightened.
1. Insert the Dowels in the Rail into the holes in the Post.
HARDWARE SYSTEM - REVIEW BEFORE ASSEMBLY
DD.Plastic Crescent Washer x12
CC. 60mm Bolt x12
Install (1) bolt and (1) crescent washer at a time.
Using the Hex Head Screwdriver,
Tighten until it looks like the picture.
5
A. Left Side x1
JJ. 8mm Dowel x14
With the Left Side (Part A) Laying Face Down on Carpet or towel (to prevent scratching).
Install (14) 8mm Dowels (Part JJ) .
STEP #1
6
JJ
JJ
JJ
JJ
JJ
JJ
7
A
C. Top Front Rail x1
E. Middle Front Rail x1
R. Bottom Front Rail x1
From Step #1
CC. 60mm Bolt x3
DD. Plastic Crescent Washer x3
DD
CC
Align the Top Front Rail (Part C), Bottom Front Rail (Part R), and Middle Front
Rail (Part E) with the dowels from step 1. install (3) 60mm Bolts (Part CC),
and (3) Crescent Washers (Part DD).
Install and Tighten the Bolts following the directions on Page 5.
STEP #2
8
DD
CC
DD
CC
DD
CC
R
E
C
9
From Step #2
D. Top Back Rail x1
S. Bottom Back Rail x1
CC. 60mm Bolt x3
DD. Plastic Crescent Washer x3
Align the Top Back Rail (Part D), and Bottom Back Rail (Part S)
with the dowels from step 1. Install (3) 60mm Bolts (Part CC),
and (3) Crescent Washers (Part DD).
Install and tighten the Bolts following the directions on page 5.
DD
CC
STEP #3
10
DD
CC
DD
CC
DD
CC
D
S
11
F. Drawer Rail x2
From Step #3
Install the (2) Drawer Rails (Part F) by aligning with the remaining Dowels from
Step 1.
STEP #4
12
F
F
13
JJ. 8mm Dowel x14
From Step #4
Install (14) 8mm Dowels (Part JJ) into the ends of the Rails.
STEP #5
14
JJ
JJ
JJ
JJ
JJ
JJ
15
From Step #5
B. Right Side x1
CC. 60mm Bolt x6
DD. Plastic Crescent Washer x6
Attach the Right Side(Part B) by aligning the Side with the Dowels from Step 5 and using
(6) 60mm Bolts (Part CC) and (6) Crescent Washers (Part DD) . Install and tighten the
Bolts following the directions on page 5.
STEP #6
16
B
DD
DD
DD
CC
CC
CC
17
CC
From Step #6
AA. 30mm Bolt x4
BB. 50mm Bolt x8
G. Top x1
JJ. 8mm Dowel x2
Intall the Top (Part G) using (2) 8mm Dowels (Part JJ), (4) 30mm Bolts (Part AA),
on the ends,and (8) 50mm Bolts (Part BB) for front and back.
Tighten Bolts with the M4 Hex wrench.
STEP #7
18
G
AA
AA
BB
AA
BB
BB
BB
BB
BB
BB
BB
JJ
AA
JJ
19
From Step #7
H. Back Panel x1
FF. PHWS 3 x 15mm Back
Panel Screw x18
Attach (1) Back Panel (Part H) using (18) Back Panel Screws (Part FF).
Tighten with a Phillips Head Screwdriver.
STEP #8
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Delta Children Summit 4 Drawer Chest Assembly Instructions

Type
Assembly Instructions

Delta Children Summit 4 Drawer Chest

The Delta Children Summit 4 Drawer Chest is a sturdy and stylish storage solution for your child's room. It comes with four drawers that are perfect for storing clothes, toys, and other belongings. The drawers are made of durable plastic and have smooth-gliding metal runners for easy opening and closing. The chest is also easy to assemble and comes with all the necessary hardware.

Here are some of the benefits of the Delta Children Summit 4 Drawer Chest:

  • Durable construction: The chest is made of sturdy MDF and has a durable laminate finish that is resistant to scratches and stains.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI