American Dynamics Intellex Intellex DVMS Operating Instructions Manual

Brand: American Dynamics

Model: Intellex Intellex DVMS

Type: Operating Instructions Manual

This manual is also suitable for

Intellex DVMS

Part Number 8000-2201-00 REV B

Intellex

Digital Video

Management System

Operating Instructions

Intellex

Digital Video Management System

Notice

The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products.

All specifications are therefore subject to change without notice.

Under copyright laws, the contents of this manual may not be cop-

ied, photocopied, reproduced, translated or reduced to any electronic

medium or machine-readable form, in whole or in part, without prior

written consent of Sensormatic Electronics Corporation.

Video Systems Division

6795 Flanders Drive

San Diego, CA 92121-2903 U.S.A.

Trademarks

Intellex

is a registered trademark and IntelleCord

™

and Smart Search

™

are trademarks of Sensormatic Electronics Corporation. Windows

a registered trademark of Microsoft Corporation. PS/2

is a regis-

tered trademark of International Business Machines Corporation.

Sony

is a registered trademark of Sony Corporation.

Trademarked names are used throughout this manual. Rather than

place a symbol at each occurrence, trademarked names are desig-

nated with initial capitalization. Inclusion or exclusion is not a judg-

ment on the validity or legal status of the term.

iii

Operating Instructions

WARNING: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICE-

ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY COMBUSTIBLE

OR EXPLOSIVE PRODUCTS ARE STORED OR USED.

THE LIGHTNING FLASH/ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,

ALERTS THE USER TO THE PRESENCE OF A SHOCK HAZARD WITHIN THE PRODUCT’S

ENCLOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class “A” digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at their own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE: This product was FCC verified under test conditions that included the use of shielded I/O cables and

connectors between system components. To be in compliance with FCC regulations, the user must use shielded

cables and connectors for all except power and alarm cables.

This digital apparatus does not exceed the Class A limits for radio noise emissions as set out in the Radio

Interference Regulations (ICES-003) of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables de la

Classe A prescrites dans le Réglement (ICES-003) sur le brouillage radioélectrique édicté par le Ministère des

Communications du Canada.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE BATTERY

MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE BATTERY

MANUFACTURER’S INSTRUCTIONS.

Intellex

Digital Video Management System

IMPORTANT

INFORMATION

Before proceeding, please read and observe all instructions and

warnings contained in this manual. Retain this manual with

the original bill of sale for future reference and, if necessary,

warranty service.

When unpacking your Intellex unit, check for missing or dam-

aged items. If any item is missing, or if damage is evident, DO

NOT INSTALL OR OPERATE THIS PRODUCT. Contact

Sensormatic or your dealer for assistance.

FOR YOUR RECORDS

Complete the following product purchase information. The

factory requests this information when contacted for techni-

cal support. It is also valuable in case of loss or theft.

Purchase Date: _______________________________________

Serial Number: _______________________________________

Operating Instructions

TABLE OF CONTENTS

CHAPTER 1 — INTRODUCTION

SAMPLE CONFIGURATION ........................................ 1

SAMPLE NETWORK CONFIGURATION ..................... 2

INTELLEX FEATURES................................................. 3

TECHNICAL OVERVIEW ............................................. 5

Digital Picture Processing ........................................ 5

Sensitivity Settings ................................................... 5

Image Quality Settings ............................................. 5

Video Input and Output ............................................ 6

Main (SVGA) Monitor ............................................... 6

Optional Live Monitor ............................................... 6

IntelleCord Filters ..................................................... 6

Smart Search Filters ................................................ 6

Filter Descriptions .................................................... 7

Motion Detection ................................................. 7

Perimeter Protection (Perimeter Violation) .......... 7

Light Change ....................................................... 7

Playback .................................................................. 7

Unit Configuration .................................................... 7

Security .................................................................... 8

Schedule .................................................................. 8

Regular Schedule ................................................ 8

Custom Schedule ................................................ 8

Single Camera ..................................................... 8

Archiving .................................................................. 9

Backup ................................................................ 9

Restore ................................................................ 9

Playback .............................................................. 9

Alarm Processing .................................................... 9

CHAPTER 2 — BASIC LIVE OPERATION

INTRODUCTION ........................................................ 10

STARTING THE INTELLEX UNIT .............................. 11

USING THE MOUSE, FRONT PANEL

AND KEYBOARD ................................................ 12

Mouse Operation ................................................... 12

Front Panel Operation ............................................ 12

Intellex

Digital Video Management System

Keyboard Operation ............................................... 12

Virtual Keyboard ................................................ 13

Physical Keyboard (Optional) ............................ 13

Selecting or Activating Features ............................ 13

Getting Help ........................................................... 13

SECURITY CONSIDERATIONS ................................ 14

LOGGING IN AND CHANGING USERS .................... 15

Logging In .............................................................. 15

Changing Users ..................................................... 16

INTELLEX MAIN SCREEN ........................................ 17

On-screen Controls and Indicators ........................ 18

CONTROLLING IMAGE DISPLAY ............................. 20

Screen Format ....................................................... 20

Image Area Popup Menu ....................................... 21

Switch to Full Screen ......................................... 21

Single Pane ....................................................... 21

Generate Alarm ................................................. 22

Camera.............................................................. 22

Mode ................................................................. 22

Cancel ............................................................... 23

Switch to Menu .................................................. 23

Image Area Zoom .................................................. 23

Full-Screen Operation ............................................ 24

Camera Sequencing .............................................. 25

Live Monitor (Optional)........................................... 26

Dome Controller (Optional) .................................... 26

Unit Schedule ........................................................ 26

REVIEWING UNIT STATUS ....................................... 27

SHUTTING DOWN THE UNIT ................................... 30

CHAPTER 3 — PLAYBACK OPERATION

PLAYBACK SCREEN ................................................. 32

Playback Controls and Indicators .......................... 33

Using the Playback Screen .................................... 35

Using Play/Pause .............................................. 35

Switching Cameras ........................................... 37

Full-Screen Operation ....................................... 37

Using Other Controls ......................................... 38

Table of Contents (continued)

vii

Operating Instructions

IMAGE DATABASE SEARCH ..................................... 39

Searching without Filters ....................................... 40

Date/Time Search ............................................. 41

Camera Search ................................................. 45

Alarm Search .................................................... 47

Searching with Filters ............................................ 50

Date/Time Search ............................................. 51

Filters Search .................................................... 54

Search Filter Configuration .................................... 58

Light Change ..................................................... 58

Motion Detection ............................................... 61

Perimeter Violation ............................................ 64

Working with Search Results ................................. 67

Sorting the Search Results ............................... 67

Selecting a Segment to Review ......................... 68

IMAGE ENHANCEMENT TOOLS .............................. 69

Modifying the Image .............................................. 75

Brightness/Contrast Tools .................................. 75

Color/Light Tools ................................................ 76

Balance Light ..................................................... 77

Edge Detect....................................................... 77

Enhance Light ................................................... 77

Noise Reduction ................................................ 78

Sharpen ............................................................. 78

Sharpen More ................................................... 79

Smooth .............................................................. 79

Smooth More ..................................................... 79

CHAPTER 4 — ADVANCED

OPERATIONS

ALARM OPERATION ................................................. 81

Mechanical Alarms ................................................ 81

Live Filter Events ................................................... 83

Video Loss Alarms ................................................. 84

Generated Alarms .................................................. 86

Alarm Groups ........................................................ 87

ALARM REVIEW SCREEN ........................................ 89

Selecting a Segment to Review ............................. 91

Table of Contents (continued)

viii

Intellex

Digital Video Management System

Figure 1 — Basic Intellex System .........................................1

Figure 2 — Sample Network Configuration .......................... 2

Figure 3 — Sample Brightness Chart .................................72

FIGURES

ARCHIVE OPERATION .............................................. 92

Back Up the Image Database ................................ 93

Background Archiving ....................................... 95

Interrupting Background Archiving .................... 99

Foreground Archiving ...................................... 101

Recovering from an Interruption ...................... 105

Restore Images ................................................... 107

Play Restored Images .......................................... 111

Format Tape ......................................................... 112

Recover Data from Tape ...................................... 113

UTILITY OPTIONS ................................................... 115

Begin Record ....................................................... 116

Generate Alarms.................................................. 118

Clear Latched ...................................................... 120

Log Out ................................................................ 120

Shutdown ............................................................. 121

Exit to System ...................................................... 122

About Intellex ....................................................... 123

LINEAR MODE OPERATION ................................... 124

Database Partially Full ......................................... 125

Database 90% Full .............................................. 126

Database Full ....................................................... 127

Unarchived Images ......................................... 128

Archived Images.............................................. 129

INDEX ...................................................................... 130

Table of Contents (continued)

Chapter 1 — Introduction 1

Chapter 1 — Introduction

The Intellex digital video management system displays and

records images from multiple video cameras. It provides a

variety of display and recording options which you can

configure according to your specific needs. A sample

configuration is shown below.

Figure 1 — Basic Intellex System

SAMPLE

CONFIGURATION

2 Intellex

Operating Instructions

SAMPLE NETWORK

CONFIGURATION

One or more Intellex units can be connected over a local area

network (LAN). Its data can then be managed from a central

site using the Network Client (sold separately). A sample net-

work configuration is shown below.

Figure 2 — Sample Network Configuration

Chapter 1 — Introduction 3

• Enhanced triplex operation provides simultaneous

record/display, playback and archiving.

• IntelleCord filters identify types of activity during record-

ing (see Filter Descriptions for more information). They ig-

nore images with unimportant activity, making efficient

use of recording capacity.

• Use Smart Search filters to quickly search the image data-

base for video segments containing specific types of activ-

ity (see Filter Descriptions for more information). Play back

these video segments.

• Use date and time, camera and alarm criteria to quickly

search the image database. Play back these video segments.

• Records and stores pre-alarm images according to each

camera’s pre-alarm setting (0 to 60 seconds).

• Compatible with color and B&W video cameras or other

NTSC/EIA (PAL/CCIR) standard compatible video

sources. Video synchronization is not required.

• Records images digitally, which eliminates the need for

VCRs and video tape. Backs up images to an optional Digi-

tal Audio Tape (DAT), saves them to a floppy diskette or

transfers them to video tape.

• User can select, enhance and copy images onto a computer

diskette or print them.

• Multicamera live displays are available for any camera in

any position in the following formats: 1x1, 2x2, 3x3 and

4x4. A full-screen view hides the controls and fills the en-

tire screen.

• Provides outstanding picture quality using a 640x480 pixel

display (800x600 in full-screen mode) with 256 gray levels

and over 16 million colors.

• Offers seven record rates: NTSC — 60, 45, 30, 15, 7.5, 2.5

and 1 images per second (ips); PAL — 50, 37.5, 25, 12.5,

6.25, 2 and 0.8 ips.

• An optional live monitor (NTSC/EIA or PAL/CCIR) may

be installed. In this configuration, the unit displays live

images on the optional monitor, even when the unit is in

playback mode.

• The mouse pointer provides access to all unit functions.

INTELLEX FEATURES

4 Intellex

Operating Instructions

• On-screen menus simplify system setup and operation.

• Online help information is available from every screen.

• One alarm input and one alarm output are available for

each camera (eight pairs on eight camera units, 16 pairs

on 16 camera units). The polarity for each alarm input can

be set to either active high or active low.

• A security system provides password protection to restrict

access to various operation and configuration functions.

• On-screen display includes date, time, alarm status, video

loss and 10-character camera titles.

• Hard disk storage protects all system configuration infor-

mation against power loss.

• Unit storage capacity can be increased by installing an

optional external data storage unit.

• An optional dome controller (Sensormatic VM16 or Ameri-

can Dynamics ADTT16) can be used to select cameras,

change display format to 1x1, 2x2, 3x3 or 4x4 and to se-

quence cameras (live mode only).

• One or more Intellex units can be connected over a local

area network (LAN). The Network Client software must be

installed on your computer.

Chapter 1 — Introduction 5

TECHNICAL OVERVIEW

Digital Picture Processing

The Intellex unit processes video images from each camera

and stores them in the unit’s image database.

The unit stores two types of images. It selects a reference im-

age, which is a complete image, and compresses the image’s

information. The unit can decompress this information into a

complete image at a later time.

The unit also stores “delta” images. It identifies the elements

of a new image that have changed. The unit then compresses

this information. Delta images contain less information than

reference images. Therefore, they require less storage space,

but they are incomplete without the reference image.

After the unit processes a certain number of delta images, it

selects a new reference image. Delta images from a low activ-

ity area are small. Conversely, delta images from a high activ-

ity area are large.

Sensitivity Settings

The Intellex unit lets you control how it responds to subtle

changes between delta images.

At the Normal Sensitivity setting, the unit ignores smaller,

more subtle changes between images.

At the High Sensitivity setting, the unit records the smaller

changes between images, improving the perceived picture

quality. As a result, this setting requires more storage space.

Image Quality Settings

The Intellex unit lets you control image quality to give you the

best combination of quality and storage for your installation.

Select different qualities for normal system operation, for spe-

cific cameras at specific times and for alarm operation.

At the Super Resolution setting, the unit uses the lowest level

of compression and maintains the best image quality. This set-

ting requires the highest amount of storage space and decreases

the unit’s capacity.

At the Extended Record setting, the unit uses the highest level

of compression and requires the least amount of storage space.

Using this setting increases the unit’s capacity, but the finer

image detail is lost.

6 Intellex

Operating Instructions

Smart Search Filters

Smart Search filters let you search the image database for video

segments containing specific types of activity (see Filter De-

scriptions for more information). Select a type of activity and a

target area. The unit locates video segments containing the ac-

tivity in the target area. Then you only have to review a few

segments to find the specific event.

Optional Live Monitor

An analog output lets you install an optional live monitor. The

unit continuously displays live images in any format (1x1, 2x2,

3x3 and 4x4) on this monitor. It also displays alarm messages

when they occur.

In this configuration, the unit uses the main (SVGA) monitor

to display the on-screen controls and to play back images from

the image database.

The main monitor is a Super VGA (SVGA) monitor, which

displays live and playback images. The screen is divided into

an image display area and a control panel. In the display area,

live images can be displayed in four formats: 1x1, 2x2, 3x3 and

4x4.

The full-screen feature lets you hide the on-screen controls and

display live and playback images full-screen.

Main (SVGA) Monitor

The Intellex unit is available for either the NTSC/EIA or PAL/

CCIR video standards. Each unit provides a video input and a

passive looping output for each camera. Neither synchroniz-

ing nor camera phasing is required.

Video Input and Output

The Normal setting offers a balance between image com-

pression and storage space requirements.

IntelleCord Filters

The Intellex unit is equipped with IntelleCord filters (see Filter

Descriptions for more information). Once configured and sched-

uled, these filters preprocess incoming video signals accord-

ing to your settings. The unit identifies important activity in

the target area and records it, while ignoring unimportant ac-

tivity.

Using the IntelleCord filters can also expand recording capac-

ity. If you use the unit as an event recorder, it will only record

images with important activity in the target area.

Chapter 1 — Introduction 7

Filter Descriptions

IntelleCord and Smart Search filters are nearly identical in con-

figuration and operation. IntelleCord filters are used on live

images; Smart Search filters are used to search the image data-

base. The three filters are described below. The name of the

Smart Search filter (if different) is in parentheses.

Motion Detection

The motion detection filter identifies movement in the target

area. Since the target area can be configured up to a 78x28 grid,

you can check for motion at any of nearly 2,200 target points.

The perimeter protection (perimeter violation) filter identifies

movement across a target boundary.

Perimeter Protection

(Perimeter Violation)

Light Change

The light change filter identifies light level changes in the tar-

get area (light to dark or dark to light).

Playback

The Intellex unit lets you quickly and easily search for and

play back images without interrupting image recording.

• Search according to date/time, camera and alarm criteria.

• Search using Smart Search filters.

• Play back video segments using the Play/Pause screen

control.

• Play back images in forward or reverse sequence at a vari-

ety of speeds, even one image at a time.

• Use image enhancement tools (zoom, brightness/contrast,

color, balance light, edge detect, enhance light, noise re-

duction, sharpen, smooth) before printing an image or sav-

ing it to a diskette.

Unit Configuration

The Intellex unit provides menus and screens for quick

configuration. You can assign names for the cameras and alarm

inputs, configure its response to alarms and configure its record

operation and display settings.

8 Intellex

Operating Instructions

Security

The Intellex unit includes a user security system to prevent

unauthorized use. To log in, operators must use their personal

identification numbers (PINs). Their PINs and functions are

assigned by the system administrator. When the operator

leaves the unit unattended, he or she should log out to maintain

system security.

NOTE: The default PIN code is 1234.

Schedule

A variety of scheduling options are available with the Intellex

unit: regular, custom and single camera.

Regular Schedule

Select regular schedule processing when your installation uses

the same hours of operation for every camera, every day and

every night. The unit uses this schedule regardless of holidays

and weekends. You can also configure two IntelleCord filters

for each camera: one for daytime operation, the other for night-

time operation.

Select custom schedule processing if your installation requires

greater flexibility. Configure a schedule for each camera using

any of the following features:

• Create different schedules for weekdays, weekends and

holidays.

• During active segments, Intellex records all images, regard-

less of alarm or filter activity.

• During alarm segments, Intellex only records images when

an alarm event occurs.

• During disabled segments, Intellex neither records nor dis-

plays camera images, even when an alarm event occurs.

Custom Schedule

Select single camera processing to record a single camera con-

tinuously. The unit ignores all record settings and alarm events

associated with other cameras.

Single Camera

Chapter 1 — Introduction 9

Alarm Processing

The Intellex unit provides one alarm input and one alarm out-

put for each camera, for a total of either eight or 16 (depend-

ing on model). You can select the polarity for each alarm in-

put.

The unit also performs a number of functions whenever an

alarm input is activated. It displays an on-screen alarm mes-

sage, permanently saves pre-alarm images to the image data-

base and activates the associated alarm output.

You can back up images in foreground or background mode.

In foreground mode, the unit stops recording until it finishes

backing up the database.

In background mode, the unit saves images to tape as it records.

Background mode is slower than foreground mode, but it does

not interfere with unit processing or the configured record rate.

Archiving

Archiving provides image backup, restore and playback on all

units equipped with a Digital Audio Tape (DAT) drive.

Backup

Restore

You can copy up to 50 video segments from an archive tape to

the unit for review. Video segments contain images from each

camera recorded during the segment.

Playback

You can play back restored video at any time. Later you can

restore other video segments for review.

10 Intellex

Operating Instructions

Chapter 2 — Basic Live Operation

This chapter introduces the basic live operation features and

capabilities of the Intellex unit. It describes:

• Starting the unit

• Logging in and changing users

• Mouse and keyboard operation

• System security considerations

• Controlling the image display

• Accessing unit status information

• Shutting down the unit

For information about configuring the Intellex unit, refer to

Chapter 3 — System Configuration and Chapter 4 — Intellex Setup

Options in the Intellex Installation Instructions.

For information about image playback, refer to Chapter 3 —

Playback Operation.

For information about advanced features, refer to Chapter 4 —

Advanced Operations.

INTRODUCTION

Chapter 2 — Basic Live Operation 11

STARTING

THE INTELLEX UNIT

CAUTION: Before connecting power, set the voltage switch

to the appropriate voltage (“115” or “230”) (see

Intellex Installation Instructions

To start up the Intellex unit, simply plug it in. If the unit does

not power up, insert a paper clip into the pinhole below the

power indicator to turn on unit power.

CAUTION: Do NOT modify any BIOS or system settings.

Do NOT reconfigure any hard drives. Otherwise you

will affect unit operation.

During the power-up cycle, the Intellex splash screen appears.

Do not press any buttons on the front panel or any keys on the

keyboard until this screen disappears. Otherwise, you may

interrupt the startup process and affect unit operation. If the

splash screen does not disappear after one minute, see the

Intellex Troubleshooting Guide.

If you are powering up the unit for the first time, a message

may appear with the splash screen. Wait at least two minutes

for both the message and the splash screen to disappear be-

fore referring to the Intellex Troubleshooting Guide.

When the main screen appears, the unit begins showing live

video from the attached cameras, based on the schedule.

CAUTION: Do NOT install any other software, including

screen savers, or you will affect unit operation.

The unit also displays the Enter PIN Code screen if security is

enabled (see Logging In and Changing Users).

12 Intellex

Operating Instructions

Keyboard Operation

Anytime a screen requires text or numeric entry, you can use

either the virtual keyboard or an optional physical keyboard.

The unit supports PS/2 style mouse pointers. It recognizes both

the left and right mouse buttons. (The center button, if present,

is not used.)

To use the mouse, position the mouse pointer and press the

LEFT mouse button. This is called “clicking.” For some opera-

tions, you press the RIGHT mouse button, which is called

“right-clicking.” Always click the left mouse button unless the

instructions specify “right clicking.”

NOTE: While the instructions in this manual were written for

right-handed mouse operation, you can reconfigure the

mouse for left-handed operation (see

Mouse Settings

Chapter 3 — System Configuration

in the

Intellex

Installation Instructions

USING THE MOUSE,

FRONT PANEL AND

KEYBOARD

The Intellex unit requires a mouse or other pointing device.

The mouse is a “point and click” tool which lets you perform

all unit functions.

For text entry, the unit includes a virtual keyboard and a virtual

keypad, which are displayed on-screen and are operated using

the mouse. A physical keyboard is not required for normal

operation.

Mouse Operation

Front Panel Operation

In addition to indicators for power, record mode and alarm,

the front panel includes power and reset switches. To avoid

pressing them by mistake, you can only press these switches

with a paper clip.

Page is loading ...

American Dynamics Intellex Intellex DVMS Operating Instructions Manual

Brand: American Dynamics

Model: Intellex Intellex DVMS

Type: Operating Instructions Manual

This manual is also suitable for

Intellex DVMS

Download PDF

report

American Dynamics Intellex Intellex DVMS Operating Instructions Manual

This manual is also suitable for

American Dynamics Intellex Intellex DVMS Operating Instructions Manual

Related papers

Other documents