- EN -
12
Pos: 24 9 /A lle Pr odukt e/U eber sc hrif te n/H ead 1/H 1 Rei nig ung un d W artu ng @ 7\mod_1196625212761_121.docx @ 41469 @ @ 1
Maintenance and cleaning
Pos: 25 0 /Alle Produkt e/Ue bersc hrift en/H ead 2/H 2 Gerät r einige n @ 102\mod_1516113982020_121.docx @ 482142 @ @ 1
Cleaning the device
Pos: 25 1 /Alle Produkt e/Dum my_m odul e/==== = Abst and 3 pt === == @ 11\m od_1251901846864_0.docx @ 72826 @ @ 1
Pos: 25 2.1 /All e Prod ukte/W arn hinwei se/>> >>>W arnhinw eis Li nie o ben<<< << @ 71\mod_1462791699897_121.docx @ 367011 @ @ 1
Pos: 252. 2 / Alle Pr odukt e/W ar nhinw ei se/N eu /TI P/Ar t un d F olg en/ af_Em pf ehl ung: @ 1 02\mod_1516285094029_121.docx @ 483402 @ @ 1
Recommendation regarding cleaning:
Pos: 252. 3 / Alle Pr odukt e/W ar nhinw ei se/N eu /Sc hutzm aß na hme n/ul_ Ger ät mi n d. 2-m al j ährl ic h rei nig en @ 10 2\m od_1516285609391_121.docx @ 483456 @ @ 1
• Clean the unit as required but at least twice a year.
Pos: 252. 4 / Alle Pr odukt e/W ar nhinw ei se/N eu /Sc hutzm aß na hme n/ul_ B eson ders Lau fei nhei t u nd P um peng ehä use r ei nige n @ 77\mod_1470321302408_121.docx @ 395142 @ @ 1
• When cleaning the pump, pay particular attention to the cleaning of the impeller unit and pump housing.
Pos: 252. 5 / Alle Pr odukt e/W ar nhinw ei se/> >> >>W arn hinw eis Lini e unt en<<< << @ 7 1\mod_1462792106537_121.docx @ 367038 @ @ 1
Pos: 25 3 /Alle Produkt e/Dum my_m odule/===== Abstand 3 pt ===== @ 11\mod_1251901846864_0.docx @ 72826 @ @ 1
Pos: 254 /All e Pr od ukte/ Rei ni gung /W artu ng/R +W M it tel/ ul_ Bei nac hla sse nder Lei st ung Ger ät mit W asser u nd B ürs te r eini ge n @ 3 2\mod_1345554978557_121.docx @ 181337 @ @ 1
• In the event of the filter housing capacity reducing, clean the unit under running water using a brush.
Pos: 25 5 /Alle Produkt e/Rei nig ung/W artung /R+W Mi ttel/ ul_K eine Rei nigu ngsmi ttel od er chemis che Lö sung en verw ende n @ 64\mod_1449238101090_121.docx @ 337331 @ @ 1
• Do not not use cleaning agents or chemical solutions.
Pos: 25 6 /Alle Produkt e/Rei nig ung/W artung /R+W Mi ttel/ ul_Em pf. Rei nigung smit tel bei hartn äckiger Verk alkung : @ 44\mod_1407159944343_121.docx @ 243379 @ @ 1
• Recommended cleaning agent for removing stubborn limescale deposits:
Pos: 257 /All e Pr od ukte/ Rei ni gung /W artu ng/R +W M it tel/ vl_ Essi g- u nd c hlor frei e n Haus h altsr ei niger @ 44\mod_1408108796310_121.docx @ 244030 @ @ 1
– Vinegar- and chlorine-free household cleaning agent.
Pos: 25 8 /Alle Produkt e/Rei nig ung/W artung /R+W Mi ttel /ul _N ach dem Rei nig en alle T eil e m it kl ar em W ass er g rü ndlic h absp üle n @ 45\mod_1409733590605_121.docx @ 246183 @ @ 1
• After cleaning, thoroughly rinse all parts in clean water.
Pos: 25 9 /Alle Produkt e/Dum my_m odul e/==== = Abst and 6 pt === == @ 7\mod_1196627997106_0.docx @ 41651 @ @ 1
Pos: 26 0 /Alle Produkt e/Ue bersc hrift en/H ead 2/H 2 PondoM ax Ec o 1500/2 500 @ 114 \mod_1535122595187_0.docx @ 516592 @ @ 1
PondoMax Eco 1500/2500
Pos: 261 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/ ad_ Lau fei nhei t r einig en/ ers etz en @ 114 \mod_1535122968011_121.docx @ 516673 @ @ 1
Cleaning/replacing the impeller unit
Pos: 26 2 /Alle Produkt e/Dum my_m odul e/==== = Abst and 3 pt === == @ 11\m od_1251901846864_0.docx @ 72826 @ @ 1
Pos: 26 3 /Alle Produkt e/Ue berschriften/<So gehen Sie vor:>>>>>>>>>>>>>> @ 44\mod_1399394612025_121.docx @ 240393 @ @ 1
How to proceed:
Pos: 264 /Alle Prod ukt e/Bi ldv ervw eise (spr ach neu tral!) /C @ 24\m od_1314277815262_0.docx @ 138214 @ @ 1
C
Pos: 26 5 /Alle Pr odukt e/M ont ag e un d Dem on tage /S chr aube n/ol _Sc hra ube n en tf ernen @ 32\mod_1345550761227_121.docx @ 181153 @ @ 1
1. Remove screws.
Pos: 26 6 /Alle Produkt e/Mo ntag e und Dem ontage /Schr aube n/- Sc hrau ben dien en als Tr anspor tsic heru ng @ 32\mod_1345550985267_121.docx @ 1 811 79 @ @ 1
– The screws are used as transport protection and not required for operation.
Pos: 267 /P umpe n/S chl amms aug er/ Alle Pum pe n/Sc hl amms aug er/ ol_R ast hak en b eta etig en und F ilt ero ber sch ale a uf kla ppe n @ 3 2\mod_1345551055217_121.docx @ 181205 @ @ 1
2. Actuate the engagement hook and fold up the strainer top casing.
Pos: 26 8 /Pump en/S chlam msaug er/Al le Pump en/Sc hlamm saug er/ol _Pump e hera usnehm en @ 32 \mod_1345551169165_121.docx @ 181231 @ @ 1
3. Remove pump.
Pos: 26 9 /Alle Produkt e/Rei nig ung/W artung /Pum pen (i nkl. Pum peng ehä use)/ ol _Pum peng eha euse : b) abdr ehe n, L aufei nhei t h eraus zi ehen @ 32\m od_1345556405059_121.docx @ 181417 @ @ 1
4. Unscrew the pump housing and pull out the impeller unit.
Pos: 270 /All e Pr od ukte/ Rei ni gung /W artu ng/R +W M it tel/ vl T eil e mi t W ass er un d B uers te r eini ge n, bes chädi gt e T eile ers etz en @ 32\m od_1345557239441_121.docx @ 181443 @ @ 1
– Clean all components under running water using a soft brush, replace damage parts.
Pos: 271 /All e Pr od ukte/ Rei ni gung /W artu ng/ ol_ Ger aet i n umg ek ehr ter Rei hen folge zusammenbauen @ 32\mod_1345557416891_121.docx @ 181469 @ @ 1
5. Reassemble the unit in the reverse order.
Pos: 272 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/- Lei tung Pum p e in Oeff nung Fil ter unt ers chal e l ege n @ 32\mod_1345557788129_121.docx @ 18152 1 @ @ 1
– Place the pump cable into the cable opening of the bottom strainer casing such that the cable will not be crushed
when closing the filter housing.
Pos: 27 3 /Alle Produkt e/Dum my_m odul e/==== = Abst and 6 pt === == @ 7\mod_1196627997106_0.doc x @ 4165 1 @ @ 1
Pos: 27 4 /Alle Produkt e/Ue bersc hrift en/H ead 2/H 2 PondoM ax Ec o 3500 @ 114 \mod_1535122680484_0.docx @ 516619 @ @ 1
PondoMax Eco 3500
Pos: 275 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/ ad_ Lau feinh eit r eini ge n/ers etz en @ 114 \mod_1535122968011_121.docx @ 516673 @ @ 1
Cleaning/replacing the impeller unit
Pos: 27 6 /Alle Produkt e/Dum my_m odul e/==== = Abst and 3 pt === == @ 11\m od_1251901846864_0.docx @ 72826 @ @ 1
Pos: 277 /All e Pr od ukte/ Ue bers chr ift en/< So g eh en Si e v or:> >>>>>>>>>>>>> @ 44\mod_1399394612025_121.docx @ 240393 @ @ 1
How to proceed:
Pos: 278 /Alle Prod ukt e/Bi ldv ervw eise (spr ach neu tral!) /D @ 25\m od_1317992446522_0.docx @ 144142 @ @ 1
D
Pos: 27 9 /Alle Produkt e/Mo ntag e und Dem ontage /Schr aube n/ol _Schra uben en tfern en @ 32\mod_1345550761227_121.docx @ 181153 @ @ 1
1. Remove screws.
Pos: 28 0 /Alle Produkt e/Mo ntag e und Dem ontage /Schr aube n/- Sc hrau ben dien en als Tr anspor tsic heru ng @ 32\mod_1345550985267_121.docx @ 181179 @ @ 1
– The screws are used as transport protection and not required for operation.
Pos: 281 /P umpe n/S chl amms aug er/ Alle Pum pe n/Sc hl amms aug er/ ol_R ast hak en b eta etig en und F ilt ero ber sch ale a uf kla ppe n @ 3 2\mod_1345551055217_121.docx @ 181205 @ @ 1
2. Actuate the engagement hook and fold up the strainer top casing.
Pos: 28 2 /Pump en/S chlam msaug er/Al le Pump en/Sc hlamm saug er/ol _Pump e hera usnehm en @ 32 \mod_1345551169165_121.docx @ 181231 @ @ 1
3. Remove pump.
Pos: 283 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/ ol _Pump eng ehä use cc w dr eh en un d en tfer nen ( Baj onet tver schl uss) @ 11 4\mod_1535112934344_121.docx @ 516556 @ @ 1
4. Unscrew the pump housing by turning counter-clockwise and remove (bayonet closing mechanism).
Pos: 284 /All e Pr od ukte/ Rei ni gung /W artu ng/R +W M it tel/ vl T eil e mi t W ass er un d B uers te r eini ge n, bes chädi gt e T eile ers etz en @ 32\m od_1345557239441_121.docx @ 181443 @ @ 1
– Clean all components under running water using a soft brush, replace damage parts.
Pos: 285 /All e Pr od ukte/ Rei ni gung /W artu ng/ ol_ Ger aet i n umg ekehrter Reihenfolge zusammenbauen @ 32\mod_1345557416891_121.docx @ 181469 @ @ 1
5. Reassemble the unit in the reverse order.
Pos: 286 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/- Lei tung Pum p e in Oeff nung Fil ter unt ers chal e l ege n @ 32\mod_1345557788129_121.docx @ 181521 @ @ 1
– Place the pump cable into the cable opening of the bottom strainer casing such that the cable will not be crushed
when closing the filter housing.
Pos: 28 7 /Alle Produkt e/Dum my_m odul e/==== = Abst and 6 pt === == @ 7\mod_1196627997106_0.docx @ 41651 @ @ 1
Pos: 28 8 /Alle Produkt e/Ue bersc hrift en/H ead 2/H 2 PondoM ax Ec o 5000/8 000/1 1000/ 14000 /17 000 @ 114\mod_1535122762289_0.docx @ 516646 @ @ 1
PondoMax Eco 5000/8000/11000/14000/17000
Pos: 28 9 /Alle Produkt e/Rei nig ung/W artung /Pum pen ( ink l. P ump eng ehä use)/ ad_ Lauf einh eit r einig en/ ers etz en @ 114\mod_1535122968011_121.docx @ 516673 @ @ 1
Cleaning/replacing the impeller unit
Pos: 29 0 /Alle Produkt e/Dum my_m odul e/==== = Abst and 3 pt === == @ 11\m od_1251901846864_0.docx @ 72826 @ @ 1
Pos: 291 /All e Pr od ukte/ Ue bers chr ift en/< So g eh en Si e v or:> >> >>> >>> >> >>> @ 44\mod_1399394612025_121.docx @ 240393 @ @ 1
How to proceed:
Pos: 292 /Alle Prod ukt e/Bi ldv ervw eise (spr ach neu tral!) /E @ 26 \mod_1320397120645_0.docx @ 146421 @ @ 1
E
Pos: 29 3 /Alle Produkt e/Mo ntag e und Dem ontage /Schr aube n/ol _Schra uben en tfern en @ 32\mod_1345550761227_121.docx @ 181153 @ @ 1
1. Remove screws.
Pos: 29 4 /Alle Produkt e/Mo ntag e und Dem ontage /Schr aube n/- Sc hrau ben dien en als Tr anspor tsic herung @ 32\mod_1345550985267_121.docx @ 181179 @ @ 1
– The screws are used as transport protection and not required for operation.
Pos: 295 /P umpe n/S chl amms aug er/ Alle Pum pe n/Sc hl amms aug er/ ol_R ast hak en b eta etig en und F ilt ero ber sch ale a uf kla ppe n @ 3 2\mod_1345551055217_121.docx @ 181205 @ @ 1
2. Actuate the engagement hook and fold up the strainer top casing.
Pos: 29 6 /Pump en/S chlam msaug er/Al le Pump en/Sc hlamm saug er/ol _Pump e hera usnehm en @ 32 \mod_1345551169165_121.docx @ 181231 @ @ 1
3. Remove pump.
Pos: 29 7 /Alle Produkt e/Mo ntag e und Dem ontage /Schr aube n/ol _Schra uben en tfern en @ 32\mod_1345550761227_121.docx @ 181153 @ @ 1
4. Remove screws.
Pos: 298 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/ ol _Pump eng eha euse : a) mit H alter ing , Dic ht ung un d L aufei nh eit abnehm en @ 32\mod_1345557559505_121.docx @ 181495 @ @ 1
5. Remove the pump housing including its holding ring, sealing and impeller unit.
Pos: 299 /All e Pr od ukte/ Rei ni gung /W artu ng/R +W M it tel/ vl T eil e mi t W ass er un d B uers te r eini ge n, bes chädi gt e T eile ers etz en @ 32\m od_1345557239441_121.docx @ 181443 @ @ 1
– Clean all components under running water using a soft brush, replace damage parts.
Pos: 300 /All e Pr od ukte/ Rei ni gung /W artu ng/ ol_ Ger aet i n umg ek ehr ter Rei hen folg e zu sam men bau en @ 3 2\mod_1345557416891_121.doc x @ 18146 9 @ @ 1
6. Reassemble the unit in the reverse order.
Pos: 301 /Alle Prod ukt e/R eini gung/ War tung /Pum pe n (i nkl. Pump eng ehä use)/- Lei tung Pum p e in Oeff nung Fil ter unt ers chal e l ege n @ 32\mod_1345557788129_121.docx @ 181521 @ @ 1
– Place the pump cable into the cable opening of the bottom strainer casing such that the cable will not be crushed
when closing the filter housing.
Pos: 302 /All e Pr od ukte/ Dum my _mo dul e/>= === Sei te nwe chsel == ==< @ 0\m od_1125648978015_0.docx @ 1631 @ @ 1
Downloaded from www.watergardeningdirect.com