MAHA CARLIFT II 5.0 | 5.5 Operating instructions

Brand: MAHA

Model: CARLIFT II 5.0 | 5.5

Type: Operating instructions

Fehler! Verwenden Sie die Registerkarte 'Start', um Name dem Text zuzuweisen, der hier angezeigt werden soll.Fehler! Verwenden Sie

die Registerkarte 'Start', um Name dem Text zuzuweisen, der hier angezeigt werden soll.Fehler! Verwenden Sie die Registerkarte

'Start', um Name dem Text zuzuweisen, der hier angezeigt werden soll.

CARLIFT II 5.0 | 5.5

Four Post Lift

Original Operating Instructions

BA363801-en

Pos: 1 /-----F or m at---- -/MA NUELLER UMBRUCH Seitenum bruch @ 0\m od_11 34403 5776 87_0.d ocx @ 127 7 @ @ 1

BA363801-en

Pos: 2 /-----F or m at---- -/I nhalts ve rzeic hn is - 3 Ebe nen @ 5\mod _116 88674 41046_ 75.d ocx @ 72 920 @ @ 1

Contents

Safety .................................................................................................................. 5

1.1 Introduction .............................................................................................................. 5

1.2 Symbols ................................................................................................................... 5

1.3 Intended Use ........................................................................................................... 5

1.4 Safety Instructions for Commissioning ...................................................................... 5

1.5 Safety Instructions for Operation............................................................................... 5

1.6 Safety Instructions for Servicing ................................................................................ 6

1.7 Safety Features ........................................................................................................ 6

1.8 Safety Instructions for Handling Hydraulic Fluid ......................................................... 7

1.9 What to Do in the Event of Defects or Malfunctions .................................................. 7

1.10 What to Do in the Event of an Accident .................................................................... 7

Description .......................................................................................................... 8

2.1 General Information .................................................................................................. 8

2.2 Specifications ........................................................................................................... 8

2.3 Sample Nameplate ................................................................................................. 10

Operation .......................................................................................................... 10

3.1 Requirements on the Operator ............................................................................... 10

3.2 Main Switch ........................................................................................................... 10

3.3 Controls ................................................................................................................. 11

3.4 Using Support Blocks ............................................................................................ 12

3.4.1 Stacking Two Blocks on Top of Each Other ........................................................... 15

3.5 Raising ................................................................................................................... 16

3.6 Lowering ................................................................................................................ 16

3.7 Wheel Alignment .................................................................................................... 17

3.8 Lighting .................................................................................................................. 17

3.9 Wheel-Free Jack (Optional) ..................................................................................... 17

3.10 Manual Lowering .................................................................................................... 18

3.10.1 Manual Lowering of Lift .......................................................................................... 18

3.10.2 Manual Lowering of Wheel-Free Jack ..................................................................... 21

Maintenance ...................................................................................................... 22

4.1 Maintenance Schedule ........................................................................................... 22

4.2 Annual Inspection ................................................................................................... 22

4.3 Checking the Fluid Level ......................................................................................... 23

4.4 Greasing the Slide Tracks ....................................................................................... 24

4.5 Care Instructions .................................................................................................... 24

BA363801-en

4.6 Troubleshooting ..................................................................................................... 24

4.7 Inspecting the Wire Ropes...................................................................................... 25

4.8 Spare Parts ............................................................................................................ 25

Service Lifetime .................................................................................................. 26

Dismantling ........................................................................................................ 26

Disposal ............................................................................................................ 26

Contents of the Declaration of Conformity ........................................................... 26

Company Information ......................................................................................... 27

Pos: 3 /-----F or m at---- -/MA NUELLER UMBRUCH Seitenum bruch @ 0\m od_11 34403 5776 87_0.d ocx @ 127 7 @ @ 1

BA363801-en

Pos: 4 /-----F or m at---- -/MA NUELLER UMBRUCH Seitenum bruch @ 0\m od_ 11 3 4403 5 776 87_ 0.d ocx @ 1 277 @ @ 1

BA363801-en

Pos: 5 / Technisc he D okumen tation/A lle Gerä te/ Überschrif ten/Über schr iften 1/S/ Über schrift 1: Sich erhei t @ 6\mod_1174482399906_75.docx @ 76962 @ 1 @ 1

Safety

Pos: 6 / Technisc he D okumen tation/A lle Gerä te/ Überschrif ten/Über schr iften 1 .1/E/ Übers chrif t 1. 1: E inführ ung @ 6\mod_1174482219062_75.docx @ 76793 @ 2 @ 1

1.1

Introduction

Pos: 7 / Te chnisc he D okum entat ion/A lle G erä te/In halte/ Sic herhe it/In halt : Einf ühru ng Si cher heit @ 6\mod_1175609639562_75.docx @ 87528 @ @ 1

Thoroughly read this manual before operating the equipment and comply with the instructions.

Always display the manual in a conspicuous location.

Personal injury and property damage incurred due to non-compliance with these safety

instructions are not covered by the product liability regulations.

Pos: 8 / Technisc he D okumen tation/A lle Gerä te/ Überschrif ten/Über schr iften 1 .1/S/ Überschri ft 1.1: Symb ole @ 6\mod_1174482270875_75.docx @ 76865 @ 2 @ 1

1.2

Symbols

Pos: 9 / Technisc he D okumen tation/A lle Gerä te/In halte/S icherhe it/Inha lt: Sy mbo le Si cher heit @ 14\mod_1239866667866_75.docx @ 361518 @ @ 1

Important safety instructions. Failure to comply with instructions could result in personal injury or

property damage.

Important information.

Pos: 10 /Techn ische Dokument ation/Alle Ger äte/Übersc hriften/ Überschrifte n 1.1/B/Über schrift 1.1: Bestimm ungsgem äßer Gebrau ch @ 6\mod_117 6734 02220 3_75.d ocx @ 88746 @ 2 @ 1

1.3

Intended Use

Pos: 11 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 00 H ebetech nik - Alle/Inha lte/Inha lt: Bestimmu ngsgem äßer G ebrauc h HBZ @ 18\mod_1258013896259_75.docx @ 521484 @ @ 1

• This lift shall be used exclusively for the safe lifting of motor vehicles. Observe the rated load

capacity.

• The lift shall not be modified without the express written consent of the manufacturer. In case of

non-compliance the declaration of conformity becomes void.

Pos: 12 / Techn ische Dokument ation/ Alle Ger äte/I nhalte/Si cher heit/In halt: Bes timmun gswid riger Geb rauch allg @ 20\mod_1269438225062_75.docx @ 82884 2 @ @ 1

Any use other than described is inappropriate.

Pos: 13 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/S/Über schr ift 1. 1: Sicher heits vorschr iften f ür die I nbetr iebnahm e @ 6\mod_1174482269156_75.docx @ 76838 @ 2 @ 1

1.4

Safety Instructions for Commissioning

Pos: 14 / Techn ische Dokument ation/ Papier korb/H ebetech nik/Inha lt: S icherhe itsvorschr iften f ür die Inbe triebnahm e HBZ @ 33\m od_1372072327331_75.docx @ 1795886 @ @ 1

• The lift shall be installed and commissioned by authorized service personnel only.

• The control desk shall not be installed in the danger zone of the lift.

• The standard lift version shall not be installed and commissioned in hazardous locations, out-

doors, in moist rooms (e.g. car wash) or outside a temperature range of 0…40 °C.

Pos: 15 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/S/Über schr ift 1. 1: Sicher heits vorschr iften f ür den Betrieb @ 6\mod_1174482268953_75.docx @ 76826 @ 2 @ 1

1.5

Safety Instructions for Operation

Pos: 16 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 36 S äule n-Heb ebühn en/00 01 Säul en-Hebeb ühnen Alle/I nhalte/ Inhal t: Sicher heitsv orschr iften für den B etrieb Säulen-H BZ @ 34\mod_1380720961671_75.docx @ 1837028 @ @ 1

• Drive on the lift only when it is in bottom position.

• Ensure an unobstructed movement of lift and vehicle.

• After raising the vehicle briefly, stop and check the lift supports for secure contact with the ve-

hicle.

• Make sure the vehicle doors are closed during raising and lowering cycles.

• Closely watch lift and vehicle during raising and lowering cycles.

• Do not allow anyone to stay in lift area during raising and lowering cycles.

• Do not allow anyone to climb on lift or inside raised vehicle.

• Comply with the applicable accident prevention regulations.

BA363801-en

• Do not exceed the rated load capacity as indicated on the lift nameplate.

• Only use the vehicle manufacturer's recommended lift points.

• Do not use the lift for transporting persons.

• Lifts with runways: After positioning the vehicle on the lift secure it against roll-off.

• Keep lift and vehicle free of tools and parts.

• Lifts with support arms: Use caution when removing or installing heavy components. Center-of-

gravity displacement may occur. Secure the vehicle using lashing straps.

• Keep the lift and lift area clean. Slip hazard on oily surface!

• The main switch serves as emergency switch. In case of emergency turn it to position "0".

• Protect all parts of the electrical equipment from humidity.

• Protect the lift against unauthorized usage by padlocking the main switch.

• Use caution with operating vehicle engines. Danger of poisoning!

Pos: 17 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/S/Über schr ift 1. 1: Sicher heits vorschr iften f ür Servi cearbeit en @ 6\mod_11 7 448 22 70640_75.docx @ 76850 @ 2 @ 1

1.6

Safety Instructions for Servicing

Pos: 18 / Techn ische Dokument ation/ Papier korb/H ebetech nik/Inha lt: S icherhe itsvorschr iften f ür Ser vicearb eiten H BZ @ 23\mod_1298969580124_75.docx @ 981599 @ @ 1

• Service work must be done by authorized service technicians.

• Turn off and padlock the main switch before doing any repair, maintenance or setup work.

• The system must be unpressurized during maintenance work.

• Work on pulse generators or proximity switches must be done by authorized service techni-

cians.

• Work on the electrical equipment must be done by service technicians or qualified electricians.

• Ensure that ecologically harmful substances are disposed of in accordance with the appropriate

regulations.

• Do not use high pressure or steam jet cleaners. Do not use caustic cleaning agents.

• The lift's safety devices must be set by authorized service technicians.

• Do not replace or override the safety devices.

Pos: 19 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Übers chrifte n 1.1/S/Übe rschr ift 1.1: Sic herheit seinric htunge n @ 6\mod_11 74483 32476 5_7 5.docx @ 77103 @ 2 @ 1

1.7

Safety Features

Pos: 20 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 36 S äule n-Heb ebühn en/00 01 Säul en-Hebeb ühnen Alle/I nhalte/ Inhal t: Sic herh eitsei nric htun gen 4S-HBZ @ 2 8\mod_1334917109966_75.docx @ 1588145 @ @ 1

Dead Man's Type Control

The operator is required to hold the main switch in the engaged position to raise or lower the lift.

Pinch Point Protection

During lowering cycles the lift automatically stops shortly before reaching bottom position.

To lower the lift completely, the "Lower" button must be released and pushed again. Lift travel to

the lower limit stop is accompanied by an audible signal.

Cable Failure Protection

In case of cable failure the safety latches automatically engage the lock ladders. After cable failure

the lift cannot be operated until the cable has been replaced.

Slack Cable Protection

If the lifting cables are slack, e.g. after contacting an obstacle, downward motion stops

automatically.

Roll-off Protection

The ends of both runways are equipped with a roll-off protection means which safely prevents the

vehicle from rolling off the lift.

Pressure Relief Valvel

The hydraulic system is equipped with a pressure relief valve.

Pos: 21 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/S/Über schr ift 1. 1: Sicher heits vorschr iften f ür den Um ga ng m it H ydr au liköl @ 1 6\mod _1 24660 77295 23_75.d ocx @ 4 01284 @ 2 @ 1

BA363801-en

1.8

Safety Instructions for Handling Hydraulic Fluid

Pos: 22 / Techn ische Dokument ation/ Alle Ger äte/I nhalte/Si cher heit/In halt: Si cherhei tsvorsc hriften für de n Umgan g m it Hydrau likö l @ 16\mod_1246608009867_75.docx @ 401310 @ @ 1

• Neutralize hydraulic fluid spills with binder.

• Remove contaminated clothing immediately.

• Inhalation: If symptoms persist, seek medical treatment.

• Skin contact: Wash skin immediately with soap and water. If skin irritation persists, seek imme-

diate medical advice.

• Eye contact: Rinse thoroughly with water and seek medical advice.

• Ingestion: Do not induce vomiting. Seek immediate medical attention.

Pos: 23 /Techn ische Dokument ation/Alle Ger äte/Übersc hriften/ Überschrifte n 1.1/V/Übers chrift 1.1: Verh alten im Störfall @ 6\mod_1178097008375_75.docx @ 90829 @ 2 @ 1

1.9

What to Do in the Event of Defects or Malfunctions

Pos: 24 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 00 H eb etechni k - Alle/I nh alte/ I nha lt: V erh alt en im St örf all H BZ @ 19\mod_1267177095494_75.docx @ 794570 @ @ 1

• In case of defects or malfunctions such as uncontrolled lift movement or deformation of the su-

perstructure, support or lower the lift immediately.

• Turn off the main switch and secure it against unauthorized usage. Contact service.

Pos: 25 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/V/ Übersc hrift 1.1 : Verh alten b ei Unfä llen @ 19\mod _126 71772 45337_ 75.d ocx @ 79 4600 @ 2 @ 1

1.10

What to Do in the Event of an Accident

Pos: 26 /Techn ische Dokument ation/Alle Ger äte/Inhal te/Sicher heit/Inhalt: Verhalten bei Unfä llen @ 34\mod_1381128804654_75.docx @ 1837123 @ @ 1

• The injured person is to be removed from the danger area. Find out where dressing and band-

ages are kept. Seek first-aid.

• Provide first-aid (stop bleeding, immobilise injured limbs), report the accident and seal off the

accident site.

• Immediately report any accident to your supervisor. Make sure a record is kept of every occa-

sion first-aid is provided, e.g. in an accident book.

• Remain calm and answer any questions that may arise.

Pos: 27 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 28 /Techn ische Dokument ation/Alle Ger äte/Übersc hriften/ Überschrifte n 1/B/Überschr ift 1: Beschre ibung @ 6\mod_1174482271453_75.docx @ 76889 @ 1 @ 1

Description

Pos: 29 /Techn ische Dokument ation/Alle Ger äte/Übersc hriften/ Überschrifte n 1.1/A/Übersc hrift 1.1: Allgem eines @ 6\mod_1182865005781_75.docx @ 97736 @ 2 @ 1

2.1

General Information

Pos: 30 / Tec hnis che Do kume ntat ion/Heb etechni k/- Arc hiv -/ 36 Säu len-H ebebü hnen/ 0001 Sä ulen-Hebeb ühnen Alle/I nhalte/I nhalt: 3600 Besc hreibung Allgem eines 4S-H BZ @ 22\mod_1291204780712_75.docx @ 950593 @ @ 1

The lift models of the CARLIFT II series are equipped with two runways supported by transverse

beams serving as load carrying device. The drive system consists of one hydraulic cylinder with

hydraulic power unit and a set of lifting cables. The lift is operated via a dead man's type control

using pushbuttons.

Pos: 31 / Techn ische Dokume ntation/Alle Ger äte/Übersc hriften/ Überschrifte n 1.1/T/Über schrift 1.1: Tech nische Daten @ 7\mod_1184075526343_75.docx @ 99711 @ 2 @ 1

2.2

Specifications

Pos: 3 2 /Tec hn ische Dokum ent ation/ Heb etech nik/ CARLI FT/ 36380 1 CA RLIFT II 5 .0/BA /Inh alt: 3638 Technische Daten (Tabelle) @ 54\mod_1530861809358_75.docx @ 3043115 @ @ 1

Load capacity 5000 kg

5500 kg

Usable runway length LF 5350 mm

5520 mm

Net weight 1650 kg

Column height HS 2544 mm

Lifting height maximum HO 1975 mm

Lifting height minimum HU 175 mm

Drive-through width maximum BH 2427 mm

Inside columns BL 2900 mm

Outside columns BA 3195 mm

Overall width B 3450 mm

Outside baseplates BG 3350 mm

Usable runway width BF 630 mm

Length of approach ramps LR 800…1100 mm

Passage clearance DB 950 / 910 / 800 mm

Outside columns LS 5462 mm

Outside baseplates LG 5794 mm

Overall length standard L 6596 mm

Full travel 1820 mm

Raising/Lowering time approx. 30 s

Motor power 5.5 kW

Supply voltage 3~ 400 V; 50 Hz (Option: 60 Hz)

Rated current 12 A

Fuse protection 16 A time-delay

Reservoir capacity approx. 12 l, HLPD 32

Reservoir capacity 250 bar

Noise emission < 70 dB(A)

BA363801-en

Pos: 33 /Technische Dokumentation/Hebetechnik/CARLIFT/363101 CARLIFT II 3.5 / 4.0/BA/Inhalt: 3631 Technische Daten (Zeichnung) @ 8\mod_1206546707116_0.docx @ 178205 @ @ 1

Pos: 34 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 35 / Tec hn isch e Do kum ent at ion/ Alle Geräte/ Überschrift en/Überschr iften 1.1/T/ Überschri ft 1.1: Typenschild-M us ter @ 1 1\mod_ 122 76222 06096_ 75.do cx @ 275 574 @ 2 @ 1

2.3

Sample Nameplate

Pos: 36 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 36 S äule n-Heb ebühn en/00 01 Säul en-Hebeb üh nen A lle/I nhalt e/Inh alt: Typ ensc hild-M uster 4S-HBZ MAHA @ 28\mod_1330533892132_75.docx @ 1557765 @ @ 1

FOUR POST LIFT

Ser. No. / Date of Production: ***

Project: ***

Model and Version: ***

Supply Voltage: ***

Frequency: ***

Rated Current: ***

Fuse Protection: ***

Load Capacity: ***

System of Protection ***

Pos: 37 / Techn ische Dokument ation/ Alle Ger äte/Übersc hriften/ Überschrifte n 1/B/Überschr ift 1: Bedienu ng @ 6\mod_1174482271218_75.docx @ 76877 @ 1 @ 1

Operation

Pos: 38 /Techn ische Dokument ation/Papi erkorb/Über schriften/ Überschrif t 1.1: Anforder ungen an den Bediener @ 18\mod_1255531954990_75.docx @ 47173 7 @ 2 @ 1

3.1

Requirements on the Operator

Pos: 39 / Techn ische Dokument ation/ Alle Ger äte/I nhalte/W arnung!/ Inha lt: War nung - A nford erungen an de n Bedie ner @ 19\mod_1267188989019_75.docx @ 794905 @ @ 1

All persons employed in the operation, maintenance, installation, removal and disposal of the plant

must

• be at least 18 years old,

• be trained and instructed in writing,

• have read and understood this manual

• be on record as having been intructed in safety guidelines.

Pos: 40 / Tec hnis che Dokum entation/ Alle Geräte/Über schriften/ Überschri ften 1.1/H/ Überschrift 1.1: Hauptschal ter @ 6\mod_ 11775 92858 312_7 5.docx @ 90635 @ 2 @ 1

3.2

Main Switch

Pos: 41 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 00 H eb etechni k - Alle/In halte/ Inha lt: H aup tsc halte r m it Not -Aus-Funk tion HBZ @ 22\mod_1295874475528_75.docx @ 964591 @ @ 1

The main switch is used as emergency switch. In case of emergency turn it to position 0.

• Main switch in position 0: Power supply is interrupted

• Main switch in position 1: Lift is ready for operation

• When in position 0, the main switch can be protected against tampering

by means of a padlock.

Pos: 42 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 43 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/B/ Überschrift 1. 1: Bedienelemen te @ 13\mod_ 12379 75099 177_ 75.do cx @ 359 008 @ 2 @ 1

3.3

Controls

Pos: 44 / Techn ische Dokument ation/ Hebetech nik/ CARLIFT/ 36310 1 C ARLI FT II 3 .5 / 4 .0/BA/ Inhalt: 3631 Bediene lemen te @ 8\mod_1206433813948_75.docx @ 177625 @ @ 1

Overview

Raise

Lower

Change-over between

Lift (Pos. 1) / Wheel-Free Jack (Pos. 2)

Set on Locks

Pinch Point Protection (Audible Signal)

S10

Lighting

Main Switch

BA363801-en

Raise

Press and hold this button to raise the lift / wheel-free jack. Lift stops once

button is released or upward travel limit is reached.

Lower

Press and hold this button to lower the lift / wheel-free jack. If equipped with

mechanical lowering device, the lift raises shortly (for approx. 2 seconds) to

disengage the latches from the lock ladder.

Lift stops once button is released or downward travel limit is reached.

Set on Locks

Press this button to set the runways on the mechanical locks. In this way the

lift can be firmly and exactly fixed for wheel alignment.

Lighting

Press this button to turn on and off the lamps between the runways.

Pos: 45 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/A/Über schr ift 1. 1: Auf nahmekl ötze ver wenden @ 4 4\mod_1459263520420_75.docx @ 2427031 @ 2 @ 1

3.4

Using Support Blocks

Pos: 46. 1 /Tec hnische Dokume ntat ion/Hebet echni k/- Arc hiv -/ 00 H ebetech nik - A lle/ In halte/ In halt : Aufn ahmek lötz e H BZ - Vorg ehensweise (Text) @ 44\mod_1461682559816_75.docx @ 2437527 @ @ 1

1 The support blocks are approved for usage on lifts with a rated load capacity of

3,500 kgs.

2 Always use four original MAHA support blocks of identical size and shape.

3 Do not use support blocks with cracks, broken-off pieces or other damage.

4 Check that all support blocks and rubber pads are free of oil, grease, dirt or

debris.

5 Place the support blocks under the vehicle manufacturer‘s recommended lift

points.

6 Note correct positioning of the support blocks.

7 Raise the vehicle until the tyres clear the floor. Stop and recheck the lift

supports for secure contact with the vehicle body.

Pos: 46. 2 /----- Forma t-----/ MAN UE LLE R UM BR UCH Se iten umb ru ch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 46. 3 /Tec hnische Dokume ntat ion/Hebet echni k/- Arc hiv -/ 00 H ebetech nik - A lle/I nha lte/In halt : Aufn ahmek lötz e H BZ - Z ulässiger Berei ch (Text) @ 44\mod_1459257598516_75.docx @ 2426593 @ 3 @ 1

The support block must be placed fully on the surface without extending byond

the edges.

A Extension B Support surface; available are:

– Granulate coating

– Granulate foil

– Rubber plate

C Support block

Pos: 46. 4 /Tec hnische Dokume ntat ion/Hebet echni k/- Arc hiv -/ 00 H ebete chnik - Alle/I nha lte/In halt : Auf nahmek l ötze H BZ - Z ulässiger Berei ch (Bilder) @ 44\mod_1459255428157_0.docx @ 2425779 @ @ 1

Pos: 46. 5 /----- Forma t-----/ MAN UE LLE R UM BR UCH Se iten umb ru ch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 46. 6 /Tec hnische Dokume ntat ion/Hebet echni k/- Arc hiv -/ 00 H ebetech nik - A lle/I nha lte/In halt : Aufn ahmek lötz e H BZ - D iago na l (Te xt) @ 4 4\mod_1459259263636_75.docx @ 2426639 @ 3 @ 1

Diagonal positioning is permissible only with granulate coated surfaces (a). If

knobbly pads are used, these must mesh with the support blocks (b).

Pos: 46. 7 /Tec hnische Dokume ntat ion/Hebet echni k/- Arc hiv -/ 00 H ebetech nik - A lle/I nha lte/In halt : Aufn ahmek lötz e H BZ - D ia go nal ( Bi lder ) @ 44\mod_1459256609357_0.docx @ 2425825 @ @ 1

Pos: 46. 8 /----- Forma t-----/ MAN UE LLE R UM BR UCH Se iten umb ru ch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 46. 9 /Tec hnische Dokume ntat ion/Hebet echni k/- Arc hiv -/ 00 H ebetech nik - A lle/I nha lte/In halt : Aufn ahmek lötz e H BZ - St apeln ( Text) @ 44\mod_1459262938946_75.docx @ 2426985 @ 3 @ 1

3.4.1

Stacking Two Blocks on Top of Each Other

Only the “DUO“ hard rubber blocks (VZ 975074) and the ductile plastic blocks (VZ

970045) may be stacked on top of each other, but not more than two blocks per

lifting point.

Pos: 46. 10 / Tech nis che Dok ume nta tion/ Heb ete chn ik/- Arc hiv -/00 Hebe techn ik - Alle/I nhalte/I nhalt: Aufna hmeklö tze HBZ - Stap eln (Bilder ) @ 44\mod _ 14 592 52 03898 1_0.d ocx @ 242 4947 @ @ 1

Pos: 47 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 48 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/H/ Überschr ift 1 .1: Hebe n @ 6\mod_1180960375312_75.docx @ 95073 @ 2 @ 1

3.5

Raising

Pos: 49 /Technische Dokumentation/Hebetechnik/CARLIFT/363101 CARLIFT II 3.5 / 4.0/BA/Inhalt: 3631 Heben @ 28\mod_1334915731385_75.docx @ 1588064 @ @ 1

 Lift is in bottom position.

1 Center the vehicle on the lift.

2 Protect the vehicle against roll-off (parking brake, chocks).

3 Leave vehicle and stay clear of lift.

4 Turn main switch to position 1.

 Lift is ready for operation.

5 To raise the lift press RAISE button until the desired height is reached.

 Lift stops once button is released or upward travel limit is reached.

6 Set the lift on the mechanical locks as described in section "Wheel Alignment".

Pos: 50 /Techn ische Dokument ation/Alle Ger äte/Übersc hriften/ Überschrifte n 1.1/S/Übersc hrift 1. 1: Senken @ 6\mod_1180960432671_75.docx @ 95086 @ 2 @ 1

3.6

Lowering

Pos: 51 /Technische Dokumentation/Hebetechnik/CARLIFT/363101 CARLIFT II 3.5 / 4.0/BA/Inhalt: 3631 Senken @ 28\mod_1334915904923_75.docx @ 1588116 @ @ 1

1 Turn main switch to position 1.

 Lift is ready for operation.

2 To lower the lift press LOWER button until the desired height is reached.

 If equipped with mechanical lowering device, the lift raises shortly (for approx. 2 seconds) to

disengage the latches from the lock ladder.

If the lift is in fully raised position, the lowering motion may be delayed by up to 3 seconds after the

LOWER button has been pushed.

 Lift stops once button is released or the lower limit stop is reached. When fully lowering the lift,

the lift stops shortly before bottom position.

3 To lower the lift completely, release the LOWER button and push it again.

 Lift motion to lower limit stop is accompanied by an audible signal (pinch point protection).

4 Turn main switch to position 0.

5 Release parking brake, remove chocks and drive the vehicle off the runways.

Pos: 52 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 53 / Techn ische Dokument ation/ Alle Ger äte/Über schriften/ Überschri ften 1.1/A/Über schrif t 1.1: Achsvermess ung @ 13\mod_1238076351340_75.docx @ 359529 @ 2 @ 1

3.7

Wheel Alignment

Pos: 54 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 00 H eb etechni k - Alle/In halte/ Info! /In halt : Inf o - Zen trierung des FZGs auf FF @ 1 3\mod_1238075328040_75.docx @ 359497 @ @ 1

Make sure to center the vehicle on the lift. Eccentric positioning may result in faulty measurement.

Pos: 55 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 00 H eb etechni k - Alle/In halte/I nhalt: Ze ntrierun g des FZGs auf FF (Bild) @ 13\m od_ 123 8074 176 549_ 0.d ocx @ 359 471 @ @ 1

Pos: 56 / Tec hnis che Do kume nt atio n/H ebet ech nik/ CAR LIF T/36 310 1 CA RLI FT II 3 .5 / 4.0/ BA /Inh al t: 3 631 A chsv erm ess un g @ 13\mod_1238080016835_75.docx @ 359551 @ @ 1

Setting the Lift on the Mechanical Locks

• Press and hold SET ON LOCKS button until all four latches are engaged on the

lock ladder.

 Lift may lower approx. 10 cm when the runways are being set on the locks.

Disengaging the Locking Latches

• Press the LOWER button.

 Lift raises briefly (approx. 2 seconds) to disengage the latches from the lock

ladder, and is ready again for regular operation.

Pos: 57 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/ B/Üb erschr ift 1.1: Beleuc htun g @ 6\mod_1180961522875_75.docx @ 95165 @ 2 @ 1

3.8

Lighting

Pos: 58 /Technische Dokumentation/Hebetechnik/CARLIFT/363101 CARLIFT II 3.5 / 4.0/BA/Inhalt: 3631 Beleuchtung @ 8\mod_1202807383749_75.docx @ 145324 @ @ 1

• Press the LIGHTING button to turn on and off the lamps between the runways.

Pos: 59 /Techn ische Dokument ation/Alle Ger äte/Übersc hriften/ Überschrifte n 1.1/R/Über schrift 1.1: Radfre iheber (Opt ion) @ 15\mod_1245830680737_75.docx @ 394246 @ 2 @ 1

3.9

Wheel-Free Jack (Optional)

Pos: 60 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/00 H ebetech nik - Alle/ Inhalte/ Inhalt : Radfrei heber Hebe n/Senk en HBZ @ 25\mod_1316163330283_75.docx @ 1050405 @ @ 1

Raising

 Vehicle must be centered over the wheel-free jack.

1 Lift the extensions using the handles and position them under the vehicle lift points.

2 If required, use additional spacer blocks under the vehicle.

3 Raise the vehicle briefly using button <WFJ UP> and check for secure contact of the

extensions at the vehicle manufacturers' recommended lift points. Then raise the vehicle to the

desired height.

 Raising motion is stopped when button is released or upper limit stop is reached.

Lowering

1 Use button <WFJ DOWN> to lower the wheel-free jack.

BA363801-en

 Lowering motion is stopped when button is released or lower limit stop is reached. An audible

warning signal sounds while the jack is lowering.

Pos: 61 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1/M/ Übersc hrift 1.1 : Ma nuelles Ab senke n @ 6\mod_1178113285703_75.docx @ 90869 @ 2 @ 1

3.10

Manual Lowering

Pos: 62 / Techn ische Dokument ation/ Hebetech nik/ - Arch iv -/ 00 H eb etechni k - Alle/Inhalte/Warnung!/Inhalt: Warnung - Manuell es Abs enke n nur dur ch g eschu ltes Pers onal @ 6\mod_1180962217687_75.docx @ 95217 @ @ 1

Authorized personnel only! Do not restart the lift before the error has been remedied.

Pos: 63 / Techn ische Dokument ation/ Alle Ger äte/Über schr iften/ Überschri ften 1.1.1/M /Überschr ift 1 .1.1: M anue lles Abse nken d er Hebeb ühne @ 24\mod_1305884623922_75.docx @ 1010624 @ 3 @ 1

3.10.1

Manual Lowering of Lift

Pos: 64 / Techn ische Dokument ation/ Hebetech nik/ CARLIFT/ 36380 1 C ARLI FT II 5 .0/BA/ Inhalt: 3638 Ma nuel les Ab senken (Text) @ 22\mod_1291197475506_75.docx @ 950094 @ @ 1

• After cable failure, manual lowering is no longer possible. The lift cannot be operated until the

cable has been replaced.

• Lifts with option "Set on Locks": Verify that the latches have not engaged the mechanical locks.

The latches can be disengaged using a hand pump (optionally available). Otherwise contact

your service representative.

Position of Valves

• Y2.1: Solenoid valve block inside the runway without cylinder

• Y1.0: Hydraulic power unit

• Y5: Solenoid valve block inside the runway with cylinder

• Y1.0: Hydraulic power unit

Procedure for Lifts with Wheel-Free Jack

1 Disable Y5 beneath the runway.

2 Disable Y2.1 on the solenoid valve block.

2a If necessary, override Y10. To do this, remove the hose from the valve and apply compressed

air to the hose.

3 Push and hold Y1.0.

 Caution! Lift begins to lower.

4 When lift is in bottom position, release Y1.0.

5 After the error has been remedied, reset Y2.1 and Y5 into operating condition.

Procedure for Lifts without Wheel-Free Jack

1 Disable Y5 beneath the runway.

1a If necessary, override Y10. To do this, remove the hose from the valve and apply compressed

air to the hose.

3 Push and hold Y1.0.

 Caution! Lift begins to lower.

4 When lift is in bottom position, release Y1.0.

5 After the error has been remedied, reset Y5 into operating condition.

Pos: 65 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

BA363801-en

Pos: 6 6 /Tec hn ische Dokum ent ation/ Heb etech nik/ CARLI FT/ 36380 1 CA RLIFT II 5 .0/BA /Inh alt: 3638 M anu elles Abs enken (B ilder) @ 25\mod_1323351874128_0.docx @ 1106881 @ @ 1

Pos: 67 /----- Form a t-----/ MAN UE LLE R UM BR UCH Sei ten umb ruch @ 0\mod_1134403577687_0.docx @ 1277 @ @ 1

Y2.1

Y1.0

Y10

BA363801-en

Pos: 6 8 /Tec hn ische Dokum ent ation/ Heb etech nik/ CARLI FT/ 36380 1 CA RLIFT II 5 .0/BA /Inh alt: 3 638 H and pum pe ( Tex t) @ 25\m od_1323357168620_75.docx @ 1106913 @ @ 1

Hand Pump (Optional)

The hydraulic power unit is optionally available with a hand pump. This can be used to disengage

the latches from the mechanical locks before manual lowering.

Pos: 69 / Tec hnisch e Do kume ntat ion/H ebet echni k/C ARLIFT/ 363 801 CA RLI FT I I 5.0/ BA/I nhal t: 3 638 Ha ndpum pe ( Bild ) @ 25\mod_1323357575692_0.docx @ 1106944 @ @ 1