1 of 7 7029-9582
Part No: Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
P
Wall
Cleat Q2
Storage
Box
Sliding Doors
(optional)
TAnti-Dislodgement
Screw
1/2"
Storage Box
Cleat
Q1 R
U
Lock Strip
(Optional)
S
Tools Required
1/8"
1/4"
1/16"
#2
48"- 96"
30"- 42"
UNITS SHIPPED UN-ASSEMBLED
OR
#10-16 x 1-1/4"" Pan Head Screw
(S)
#10-16 x 1-1/4"" Pan Head Screw
(S)
#10 x 1" Flat Head Screw
(R)UNITS SHIPPED ASSEMBLED
24 x 11mm Minix Bolt
(D)
(C)
Minix 1/4 Turn Cam
(B)
Double Locking Carcase
C
C
D
B
E
Left End
Panel
M
Back Panel
Right End
Panel
G
Divider
H
Top
K
NO TRACKTRACK
OR
A
Bottom
Wall Mount Storage Box
Installation Instructions
244-374 H
IMPORTANT NOTICE: This instruction
is for Storage Boxes ordered after
10/27/14. Note the hardware changes
used to assembly the product.
NOTE: Screw (S) is
shipped with 2 colors.
-Silver for lighter cabinets
-Black for dark cabinets.
3"
2 of 7 7029-9582
Part No: Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
M
(B)
Double Locking Carcase
B
E
K
1
3
2D
D
D
4
H
C
C
C
DC
32
DC
32
1
C
G
A
B
1
244-374 H
3 of 7 7029-9582
Part No: Rev:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
3Locate holes using wall cleat (Q2) as template
Q2 16" ON CENTER
MAXIMUM
X - 7.50"
7.5"
X"
12" MAXIMUM
(BOTH SIDES)
1/8"
Q2
Q1
Q2
1If present remove screws (as shown) 2Install cleat (Q1)
R
Q1
P
1/8"
1/4" MAX
WALL TRACK ATTACHMENT OPTIONS
FOR WOOD STUDS
#10-12 x 2-1/2" Flat Head Screw
(AL)
3/4"
PLYWOOD
OR
Q2
AL
WALL BOARD
Q2
#10 x 1" Flat Head Screw
(R)
244-374 H
NOTE: Due to varying wall
construction, fasteners are
not included and must be
feild supplied.
1/4-20 x 4" Toggle Bolt
(AN)
BLOCK WALLS
4 of 7 7029-9582 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
FOR STEEL STUDS
Q2 16" ON CENTER
MAXIMUM
X - 7.50"
12" MAXIMUM
(BOTH SIDES)
1/8"
Q2
3/4"
PLYWOOD
OR
Q2
AM
#10-24 x 2" Tek Screw Self Drilling
(AM)
FOR POURED CONCRETE WALLS
244-374 H
NOTE: Due to varying wall
construction, fasteners are
not included and must be
feild supplied.
NOTE: Due to varying wall
construction, fasteners are
not included and must be
feild supplied.
NOTE: Due to varying wall
construction, fasteners are
not included and must be
feild supplied.
S
Q1
Q2
5 of 7
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
4Install storage box (P)
NOTE: Make sure storage
box cleat (Q1) and wall mount
cleat (Q2) interlock securely.
Q1
Q2
Q2
Q1
P
S
2.00"
5.0"
1/4"
NOTE: Drill through
box (P) only.
#10-16 x 1-1/4"" Pan Head Screw
(S)
#10-16 x 1-1/4"" Pan Head Screw
(S)
T
1
2
T
NOTE: Paran wax MUST
be applied to bottom edge of
door to improve sliding door.
NOTE: Install back
right door rst.
2
OPTIONAL DOOR INSTALLATION
1
7029-9582
Part No: Rev:
244-374 H
NOTE: Adhesive
side towards track.
U
NOTE: Install anti-dislodge
strips (U) for sliding doors in
the track at the center of each
door as shown.
3"
C
L
6 of 7
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
3
7029-9582
Part No: Rev:
C
L
3"
244-374 H
NOTE: Adhesive
side towards track.
U
NOTE: Install anti-dislodge
strips (U) for sliding doors in
the track at the center of each
door as shown.
OPTIONAL LOCK PLUG INSTALLATION
2
CK-3
HW-SERIES
Install lock plug (HW-SERIES)
NOTE: Position cam to unlocked
(12:00 o’clock position.
NOTE: It may be necessary to
rotate cam until lock plug
engages.
NOTE: Hold the lock
plug (HW-SERIES) in
place with thumb
while removing the
control key (CK-3).
Remove round key (CK-3) and insert square key (X)
13
X
CK-3
HW-SERIES
Replace square key (X) with round key (CK-3)
1
2
CK-3
X
HW-SERIES
1
2
3"
AB
AA
OPTIONAL TASK LIGHT INSTALLATION
Minimize Distance
1/8"
1/4" MAX
AA
AC
AK
AB
AB
AA
AK
OR
#10-16 x .44" Pan Head Screw
(AA)
#10-16 x .44" Pan Head Screw
(AA)
AC
AA
1/4"
MAX
1/16"
AG
AF
AE
AD
AH
AG
1
2
7 of 7 7029-9582 Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
244-374 H
/
