Troy-Bilt 11A426C211 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
11A426C211
Type
Fast Start Guide

This manual is also suitable for

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING.
Read and understand all instruction, warning, and danger labels.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
A
B
Lift handle to extended position.
Tighten star knobs.
1
Place ends of lower handle onto handle brackets.
Insert carriage bolts and tighten with wing nuts.
2
Secure cable to lower handle with
cable tie provided.
3
4
A
C
D
B
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
778-10594D
11A-426A011
11A-426C211
Refer to Operator’s Manual for instructions on attaching the grass catcher.
Starter
Rope
Blade Control Handle
© 2006
Star Knobs
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING.
Read and understand all instruction, warning, and danger labels.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Depress blade control handle and hold.
Pull starter rope with quick, full arm stroke.
If engine does not start after ve pulls,
repeat steps 7 through 9.
9
8
Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with entire contents of oil bottle supplied
with your mower.
5
6
Push primer ve times.
7
Gas Cap
Oil Fill
Primer
  • Page 1 1
  • Page 2 2

Troy-Bilt 11A426C211 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
11A426C211
Type
Fast Start Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents